pikacu..
un -necessary i think..I dont want benchmarks..
Or i am wrong? = =

yo guys, need help here. whenever i set the vcore to 1.528 my PC will sure lock up when testing wif ORTHOS....

so is it my NB, HyperTransport or Memory Voltage is low?

now i'm running at 3.45GHz, vcore 1.480V

i hope u guys can give me some tips...

AMD Cool ' n ' quiet should be disabled one? Correct me if i am wrong.

done tat whenever i test wif ORTHOS.

those auto voltage set at manually ht ration and cpu ration ration set is manually ...and disabled spread spectrum

actually, wat does the spread spectrum do?

i think u will not find any stability above 1.5v bro, heat is ur enemy now

something like read the cpu internal thing

u r using 2 x 2gb ram...is quite hard to oc ...vdimm (ram voltage) need a bit if u wan to oc 4gb ram and also so hard to oc higher even u divider down to 800 / 667...
try with 1 stick ram only .. see will work or not

yup, i stated tat once i hit the vcore above 1.5V my PC will lock up after a while.

---

Added on January 24, 2009, 9:21 amactually did the RAM oso have effect on the proc when OCing?

This post has been edited by Sib: Jan 24 2009, 09:21 AM

Heat dragon + more cache...is quite hard
6400 be is eazy to oc with multiplier . so how high multiplier can hit ?

---

Added on January 24, 2009, 9:25 amOf coz ram will effect if oc using htt(fsb) ..if only using multiplier will no much effect ram

This post has been edited by digswell: Jan 24 2009, 09:25 AM

x16 only...

how come x16 only ....my 5000be + bios ta770 got multiplier until x28
maybe u not disable CnQ and maybe mobo hv limit to allow u to oc

i'm goin to check on it later, thx.

my best bet is still heat......

try oc with fan full blast at open casing pc.....better with aircond on...

the higher ur speed and vcore..the lower u need the temp....
kinda weird too even if ur temp doesnt change much frm start...

got budget change to ccf..
planning to get one too.. but now theres ice blade
dunno wat to choose.. last time got ttbt vx..

This post has been edited by anep: Jan 24 2009, 11:03 AM

i think i'll stick the vcore below 1.5V, above it my temp goes 50'C even on idle...
my Hyper 212 performs well imo, if i'm considering an upgrade, i'll go for CM V8

u got 790fx n a BE.. i tink u can push higher.. mine 5k BE can push 3.2.. urs mayb 3.4..

i've stated tat i'm currently running at 3.47GHz now...

owh ok.. nice

thx, but i'm aiming at least 3.5~3.6GHz...