so is it my NB, HyperTransport or Memory Voltage is low?
now i'm running at 3.45GHz, vcore 1.480V
i hope u guys can give me some tips...
AMD® Socket-AM2&AM2+ Overclocking V14, So..it has come..Do you fear Deneb?
|
|
 Jan 24 2009, 08:58 AM
Return to original view | Post
#1
|
 
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya  
|
yo guys, need help here. whenever i set the vcore to 1.528 my PC will sure lock up when testing wif ORTHOS....
so is it my NB, HyperTransport or Memory Voltage is low? now i'm running at 3.45GHz, vcore 1.480V i hope u guys can give me some tips... |
Quote|
|
|
|
|
Jan 24 2009, 09:03 AM
Return to original view | Post
#2
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(Liuteva @ Jan 24 2009, 08:59 AM) AMD Cool ' n ' quiet should be disabled one? Correct me if i am wrong. done tat whenever i test wif ORTHOS. |
|
|
Jan 24 2009, 09:10 AM
Return to original view | Post
#3
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(digswell @ Jan 24 2009, 09:08 AM) those auto voltage set at manually ht ration and cpu ration ration set is manually ...and disabled spread spectrum actually, wat does the spread spectrum do? |
|
|
Jan 24 2009, 09:20 AM
Return to original view | Post
#4
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(xixo_12 @ Jan 24 2009, 09:17 AM) i think u will not find any stability above 1.5v bro, heat is ur enemy now yup, i stated tat once i hit the vcore above 1.5V my PC will lock up after a while.Added on January 24, 2009, 9:21 am QUOTE(digswell @ Jan 24 2009, 09:19 AM) something like read the cpu internal thing actually did the RAM oso have effect on the proc when OCing? u r using 2 x 2gb ram...is quite hard to oc ...vdimm (ram voltage) need a bit if u wan to oc 4gb ram and also so hard to oc higher even u divider down to 800 / 667... try with 1 stick ram only .. see will work or not This post has been edited by Sib: Jan 24 2009, 09:21 AM |
|
|
Jan 24 2009, 09:27 AM
Return to original view | Post
#5
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(digswell @ Jan 24 2009, 09:24 AM) Heat dragon + more cache...is quite hard x16 only... 6400 be is eazy to oc with multiplier . so how high multiplier can hit ? Added on January 24, 2009, 9:25 am Of coz ram will effect if oc using htt(fsb) ..if only using multiplier will no much effect ram  |
|
|
Jan 24 2009, 09:35 AM
Return to original view | Post
#6
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(digswell @ Jan 24 2009, 09:30 AM) how come x16 only ....my 5000be + bios ta770 got multiplier until x28 i'm goin to check on it later, thx.maybe u not disable CnQ and maybe mobo hv limit to allow u to oc |
|
|
|
|
|
Jan 24 2009, 11:02 AM
Return to original view | Post
#7
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(CV6149 @ Jan 24 2009, 10:30 AM) my best bet is still heat...... i think i'll stick the vcore below 1.5V, above it my temp goes 50'C even on idle... try oc with fan full blast at open casing pc.....better with aircond on... the higher ur speed and vcore..the lower u need the temp.... kinda weird too even if ur temp doesnt change much frm start...  QUOTE(anep @ Jan 24 2009, 10:59 AM) got budget change to ccf.. my Hyper 212 performs well imo, if i'm considering an upgrade, i'll go for CM V8  |
|
|
Jan 24 2009, 11:07 AM
Return to original view | Post
#8
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(anep @ Jan 24 2009, 11:04 AM) u got 790fx n a BE.. i tink u can push higher.. mine 5k BE can push 3.2.. urs mayb 3.4.. i've stated tat i'm currently running at 3.47GHz now... 
|
|
|
Jan 24 2009, 11:26 AM
Return to original view | Post
#9
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(anep @ Jan 24 2009, 11:13 AM) owh ok.. nice thx, but i'm aiming at least 3.5~3.6GHz... |
|
|
Jan 24 2009, 11:34 AM
Return to original view | Post
#10
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(CV6149 @ Jan 24 2009, 11:30 AM) for personal record or running 24/7? running 24/7 for better realibility..suggest to run on water..u will be amaze when ur idle is at 24-8ish........   too much hassle if go for water cooling... do u guys think it'll help if i add up the NB voltage? |
|
|
Jan 28 2009, 08:53 PM
Return to original view | Post
#11
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
guys, any1 uses 790FX board wif SB600 pair wif phenom II? how is the OC potential?
is it limiting the proc? pls enlighten me on tis, thx  |
|
|
Jan 28 2009, 09:05 PM
Return to original view | Post
#12
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(xixo_12 @ Jan 28 2009, 09:00 PM) nobody own it except for one guy only.. and he used sb750 only.. so i think no one will enlighten u about it yea, i know it's pikacu, saw his record at 3.6GHz... i rly appreciate if u guys would help me wif my dilemma here thx |
|
|
Jan 28 2009, 09:13 PM
Return to original view | Post
#13
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(xixo_12 @ Jan 28 2009, 09:11 PM) i have suggestion, but don't want to put any vote there i bet i can only get half the moneh i need to purchase both,lol  why not u just sell both proc and mobo, and come with new mobo that very ocable, new sb and of course new proc to couple with current gc... |
|
|
|
|
|
Jan 28 2009, 11:23 PM
Return to original view | Post
#14
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
guys, from my pov BSOD when doing stress test is due to lack of vcore rite?
but wat about lock ups? insufficient voltage to HTT or Northbridge? i've tried stressing it wif ORTHOS b4 even on higher vcore (1.528V) but my pc got locked up even under 1min...  heat is last recorded at 61'C at tat time tho... |
|
|
Jan 28 2009, 11:49 PM
Return to original view | Post
#15
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(byfc2010 @ Jan 28 2009, 11:43 PM) erm... at tat time my vcore is 1.528V, 3.50GHz, 220MHz x 16...or lockup is it because of lacking vcore while BSOD is because of lacking VDimm?? i would like to noe also... shudn't be low vcore gua... |
|
|
Jan 29 2009, 12:07 AM
Return to original view | Post
#16
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(byfc2010 @ Jan 29 2009, 12:05 AM) vcore n clock speed is not proportional at high clocks ler... so wat am i suppose to do? i'm still a newb in OC tho.... i've read thru the basic n fundamentals alr but can't understand it fully tho so any advice or guides on tis is highly appreciated |
|
|
Jan 29 2009, 12:28 AM
Return to original view | Post
#17
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(byfc2010 @ Jan 29 2009, 12:25 AM) well, can u provide printscreen of cpuz of ur proc n ram?? u've found ur max potential of ur proc d?? 
i didn't touch any setting on my RAM tho... |
|
|
Jan 29 2009, 12:52 AM
Return to original view | Post
#18
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(pikacu @ Jan 29 2009, 12:48 AM) Find the max clockspeed with your current vcore, if bsod happen at some clock..then only up up vcore abit.. max is as i posted b4 wif 1.488V, 3.48GHz...more than tat sure BSOD but if i ramp up till 1.5V it'll cause lock ups... |
|
|
Jan 29 2009, 12:54 AM
Return to original view | Post
#19
|
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
QUOTE(byfc2010 @ Jan 29 2009, 12:53 AM) so that's the highest u can go...  dayyum, i rly wanted to achieve more than tat... will try ur advice on lowering the divider, thx |
|
Topic ClosedOptions
|
| Change to: |  0.0478sec
 0.99
 7 queries
 GZIP Disabled
Time is now: 1st December 2025 - 02:51 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.