if i change my AMD 6000+ stock cooler to hyper z600 and Tuniq TX-2.
the temp will decrease a lot ?
and i use Core Temp to check the temp,the temp keep change.
now is the temp is 47 and 37 with stock cooler without change fan speed.

why not ccf or other better cooler instead of z600? it's a passive cooler rite?

Lu bikin hati gua panas saje with ur low voltage
Go go go ah_khoo

@ah_khoo 2rd z600 RM120.
worth ?
not too much different with the stock cooler ?

bro better go for ccf or other hdt style cooler with that kind of budget.....

try cm n620 la..

its been a while since my pc last running.. will my pc spoilt ar if not running for too long ?

@fuzore
quaddie? then i also join u la.. when u want to buy ?

@ah_khoo
bro.. how to read the prime95 ar ? i never used the program b4..

This post has been edited by sarahlah: Jan 19 2009, 10:59 AM

lol... just bein lucky only bro... but dfi did contribute a lot (jgn marah yer )...

thx bro, once 3.0GHz attainable then i'm done.

active coolers are always better. a brand new ccf cost around RM160 & i can tell u d RM40 extra is worth spendin.

actually wat is ccf ?

sunbeam core contact freezer...

http://www.tweaktown.com/reviews/1429/sunb...oler/index.html

i really like d effort of sunbeam in makin d clip in order for d cooler to be able to blow out d hot air towards d exhaust fan. tr, xigmatek and others should learn from sunbeam...

he..he..later when i got my claim payment i will hunt quaddie down....
if u wanna follow i will contact u...ok...

bro u really made me wanna grab quaddie earlier.....but patience is virtue...
hope my biostar wont let me down...

core contact freezer....

confuse ..core contact freezer?
hyper z600 not core contact freezer?
then hyper z600 is wat ?

eh..isnt thermalright already has s-clip to do the job?

ermmm... what do u mean by how to read bro? it's d same like orthos w/ less user friendly gui... nevertheless, they are d same.

yup bro, patience is virtue but sometimes one mite get lucky in rushin... take ya time in huntin bro, if ur gettin a brand new quaddy, look for these batches:

0810
0816
0836

these are gud batches that i know...

bro, i got a s-clip lyin there in my h/w box due to incompatibility w/ true. can use but can only turn 45' only, looks really weirdo...



This post has been edited by ah_khoo: Jan 19 2009, 11:25 AM

he..he.. i'm more confuse on ur question bro...

ok note taken .... tq big bro....

wat hanpen ar (fatal error was 0.5 expected less than 0.4) ?

i'm not sure i'm big but certainly i got a big tummy...

voltage not enuf in most of d case.

*pls correct me if i'm wrong.

_________________________________________________________________________________________________________________________

guys, i got a very noob question to ask:

if cross fire 2 cards need to put only one cf bridge or is it 2 are needed?

This post has been edited by ah_khoo: Jan 19 2009, 01:48 PM

If i'm not mistaken u need to use 2 cf bridge, coz last time i tried cf my 4870 with an 4850 it would not turn on d cf function due to me havin only one cf bridge..
And i read in the biostar manual it says it needs two ah..

thx bro, i'm askin coz my cf sometimes was turned off intermittently, can't even detect d 2nd card. i suspect it's either cf bridge or d 6-pins pcie connector got problem. still not bothered by it much atm, concentrate on chip oc 1st...

This post has been edited by ah_khoo: Jan 19 2009, 01:47 PM

oc my amd now .... 3.3 canot staber ..... 3.2 ok ..

alredy hit the wall maybe...