Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
3 Pages  1 2 3 >Bottom

Outline · [ Standard ] · Linear+

 Super Noobs Help! [Thread V3], Post Your ULTRA Simple Questions Here

views
     
kuntawakaw
post Jun 18 2009, 09:05 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(finalmoto123 @ Jun 18 2009, 09:02 PM)
btw. the ROM will be saved in motherboard right not in the drive. thats mean i dont have to update my BIOS again after i formatting my system right?
*
indeed..it will be saved here
user posted image

kuntawakaw
post Jun 19 2009, 03:20 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(danny_sp15 @ Jun 19 2009, 03:13 PM)
hmm, another noob question here, probably been asked before, but i just wanna know, how often and how do u guys clean ur hsf? especially 3rd party hsf with those huge fins like ccf and red scorpion... cos i wanna buy one but afraid that the small spaces between those fins could be a dust magnet...
*
me...once a month...since i have more intake fan compared to exhaust fan... once a month also been too dusty..btw i will not take out the heat sink...i just detach the fan...clean it and put back the fan... from my experience, the dust will accumulate a the fan and btween the can and heatsink..mean only small amount of it goes into the small space every blade... (not good at explaining sweat.gif sweat.gif )
kuntawakaw
post Jun 20 2009, 07:04 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(danny_sp15 @ Jun 20 2009, 05:19 PM)
hey guys, just wondering, would a pentium 4 HT 3.0GHz be much of a bottleneck if i were to install a HD4830 in my system? cos dont have much cash to upgrade proc, so im wondering if my proc is enough to play games like crysis... thanks!
*
my fren pairing the 4670 woth his p4 (i donno the details about it.donno what core speed ) but it greatly reduce the performance... i can see a severe bottleneck at his setup while play a L4D.. and crysis shudnt be any better...

QUOTE(wch5274 @ Jun 20 2009, 06:00 PM)
use furmark... its great software for GC testing...
sometime too great, the load temperature in furmark will not be happen at ur GC..
so if furmark test pass, mean ur GC pass... normally game load temp 5~10C below than furmark..  whistling.gif
*
i prefer atitool for the artifact scanning... and i do believe it better then furmark..
kuntawakaw
post Jul 1 2009, 02:35 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(presario3839 @ Jun 30 2009, 08:31 PM)
Hi there.. biggrin.gif
What is d cheapest + good P45 mobo 4 gaming + multi-tasking + also "tahan lama"..??? hmm.gif

THANX... notworthy.gif  notworthy.gif  notworthy.gif
*
is mobo affect the multi taskin and gaming alot? i guess no... mebbe 1-2%.. <corrct me if im wrong
tahan lama? dont abuse that board.. no oc..no extra work...less heat....so can tahan lama.
kuntawakaw
post Jul 6 2009, 09:43 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(capix @ Jul 6 2009, 08:18 PM)
it is normal lan port light (orange) menyala even u not inserted any lan cable...it start on since i press the onn button...haizz
*
its not normal for my rig but its normal for my office rig..mebbe it depends la..
kuntawakaw
post Jul 22 2009, 08:16 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(Racerx @ Jul 22 2009, 07:45 PM)
i got one question

does enabling ahci in bios equals to more performance?
*
i guess so..few percent..
but i havent feel any gain of performance or im just too dumb to feel..
but in benchmark sure u can see the different laugh.gif laugh.gif
kuntawakaw
post Jul 25 2009, 02:15 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(miriel10 @ Jul 25 2009, 12:37 PM)
question: what's the difference of a 1TB version of Western Digital Caviar Green and Caviar Black? AFAIK both have 32MB cache so i assume performance should be the same.
*
i think the performance if hardly notice..unless u do the write/read benchmarking
anf green consume low power, 4-5w and black like 8-10
also black is 7200rpm and green is 5400rpm
so that is the different
kuntawakaw
post Jul 30 2009, 03:07 AM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(xi4n9 @ Jul 30 2009, 01:09 AM)
I have alot questions about graphic cards which i dont know where to start with...lets say about
1. the versions, and ram, and pin socket, and AGP, PCI-E diffrence?

AGP card fits into only AGP slot.. PCIE fits into PCIE slots only.
» Click to show Spoiler - click again to hide... «

example NVIDIA
9XXX series is newer then 8XXX or 7XXX series..
in 9XXX series.. 9800 is better then 9600 (ascending num is better)
but to compare 8series with 9series.. or ATI vs NVIDIA need reading
» Click to show Spoiler - click again to hide... «

all newer card is PCIE (except ATI 46XX AGP)
ram capacity, u can check with the box..
but 512MB is common for a mid range card.. (there are also 1gb like 4670,GTS250 etc..so u need reading)
» Click to show Spoiler - click again to hide... «
http://www.tomshardware.com/charts/graphics-cards,1.html
kuntawakaw
post Aug 1 2009, 03:24 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(dlwl @ Aug 1 2009, 01:24 PM)
my hard disk has started making some clicking sounds after some time of usage, and it causes the whole system to hang. possible sign of my hard disk dying? or is it just not getting enough power?
*
my fren's dead HDD (external) produce a loud clicking sound..and it will make system hang for minutes if connect direct to IDE port at POST

kuntawakaw
post Aug 3 2009, 02:47 AM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(kamechi @ Aug 2 2009, 11:04 PM)
hi, anyone know about whats the different between MSI 770 C45 and 770T C45? i was about to get one...
*
the c45 without the T is AM3 socket..
and 770T is AM2+ socket..

what is the price eh? shud be fairly cheap...
kuntawakaw
post Aug 4 2009, 07:38 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


i have some questions that i consider noob.. but it will help me..

1. can i plug in internal HDD when system is running? (dont care sata or IDE)

2. what will happen if i ON..then take off the CMOS clear jumper?

3. after that what will happen if after that, i put back the CMOS jumper at the "reset place" (2.3. pins)

4.how to make molex 4 pin always on..(pls take note, not USB..its molex) even i shut down the PC...
kuntawakaw
post Aug 4 2009, 10:48 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(:3mushy:3 @ Aug 4 2009, 10:41 PM)
1. Caaaaaaaaaaaaaaaaaaaaaan, why cannot? Using your fingers to plug in the cable into HDD is simple only right? But it won't work.

2&3. - Depends on mobo. Either BSOD, or simply nothing happens.
No problem.
*
so the 1. can but not working la...orait.. thanks

2 n 3.. mobo wont spoil? so i can give it a try..

and another noob question..

if stack togther 2 identiccal fans..will the CFM increase? -dont expect it will double..but is there any improvement?
just lazy to make experiment on my own (since this is a noob thread thread..so can ask...hehehe)
kuntawakaw
post Aug 5 2009, 01:13 AM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(xi4n9 @ Aug 5 2009, 12:31 AM)
hmm, a question for motherboard socket 775

1.why there is so many variety of them? different heat sink? or different slot applicable?
2.my ram's maximum capacity depends on motherboard or processor?
3.the pci-e graphic card every model also can insert every kind of motherboard pci-e slot?
4.can anyone tell me whats the difference between rm200 mobo and rm300-400 mobo difference? maybe rm600-800 i can assume it have its own high end issue, but what makes a difference if the price is between range rm100?(same brand here i conclude as for MSI or gigabyte.)
*
1~~~~
2..mobo
3 yes u may.
4.chipsett used.. SLI/CFable, nice looking (lotsa heatsink), num of phases, brand, and any other add ons feature that u can obtain from websites..
kuntawakaw
post Aug 10 2009, 03:36 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


@paca
just seek for another sata cable
and another power cable

and plug to another sata slot..

then good to go..u can set which one to be the primary in bios (And also can plug into more small num slot number ..find on ur manual
kuntawakaw
post Aug 11 2009, 02:55 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(our_team89 @ Aug 11 2009, 09:52 AM)
i already ask them,they say don't sell it..where else i can go?

want to buy that proc soon,sick with phenom 9550 lagging sweat.gif
btw thx 4 da reply..
*
AMD Phenom X4 9550 | ASUS M2N68 | ASUS ENGTX275 | 2G+1G+1G A-Data DDR2 800MHz | CM Hyper 212 | CM 690 | Thermaltake Toughpower 750W | Samsung 933BW 19'' LCD | Samsung DVD-RW | WD Caviar 320GB | Logitech Keyboard | Logitech MX518 | Altec Lansing V2421

that bottle neck of proc so great of what? until prototype can lag even with GTX275 @ 19" monitor....
i wonder... sweat.gif prototype very proc demand ka? hmm.gif hmm.gif

y dont u try plug in the 4pin 1st.. and see ur system is stable or not... if stable, no need to plug all both 4pin/4pin... (i think system still can run even plug 1 only right? )
kuntawakaw
post Aug 11 2009, 06:54 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(our_team89 @ Aug 11 2009, 06:29 PM)
@kunta n hiroki

actually the 4+4pin extension cable that i needed is not becoz of my processor lagging..it is coz i want to route the cable behind mobo tray but my cable not long enuf..n i need 4+4 coz soon i want to upgrade my mobo to M4N82 Deluxe..sorry if i made people misunderstood.

i think mayb it proc demand coz it's an open world game like gtaIV..my fren that use the same proc also with eah4850 experience lagging prob..not to much actually,only certain times..n i already updated my gc driver to 186.18..

btw,thx 4 ur reply..
*
and also i havent mention about the 8pin related to the lagging in games...but to answer ur question..i havent found that cable yet..mebbe u need to ask for the salesman rather then seek for ur own...sometimes they have stock but not put it for display...(applies for sri komputer-other shop sure not displaying then since not enough space)

u cant compare ur GC with ur fren..cuz ure GC is faster then him..(price also like 2fold right?)
but to have a prototype lagging in 19" (1440x900 perhaps) using GTX275 is kindda weird for me....
GTA4..no wonder..
kuntawakaw
post Aug 28 2009, 02:40 AM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(hantu667 @ Aug 28 2009, 12:41 AM)
another question:
what fan 120 mm is the best..
is it with a high cfm?

p/s so many question i ask.. biggrin.gif
*
i know 1..the highest i know is 190cfm (As advertised..)
its delta...

u dont care about noise at all?
need no LED or bling2 factor at all?
kuntawakaw
post Sep 5 2009, 04:57 PM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(ayieazz @ Sep 5 2009, 11:39 AM)
help me plss...i cant load save game coz it will crash and close..
like this...if i play it non stop nothing will happen and it run smoothly..but if i save/quit..then i try to play from save file later it will crash and close....why is't happen??
*
1 question...
ori game or pirated one?
kuntawakaw
post Sep 7 2009, 01:18 AM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(dan137 @ Sep 7 2009, 01:14 AM)
can crossfire 4850 with 4890 or 4870 or not?
*
sure can... all 4800 family can be CF..same goes to 4600 family and so on...regardless of brand..
kuntawakaw
post Sep 7 2009, 03:39 AM

imma tag fag!
*******
Senior Member
3,795 posts

Joined: Nov 2008
From: Varies....


QUOTE(miriel10 @ Sep 7 2009, 03:30 AM)
i think the question is whether 4850 can be crossfired with 4870/4890. i dont think that's possible. 4850 can only be crossfired with another 4850.
*
teettt.. u re wrong
even 4830 can be cf with 4890..

go to AMD site and pay a visit to the CF table dood

3 Pages  1 2 3 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0453sec    0.96    7 queries    GZIP Disabled
Time is now: 9th December 2025 - 12:02 AM