what rams are those??
value??
can the dominators fit under the v8??

This post has been edited by cstkl1: Mar 1 2009, 02:37 AM

ah want to do all red eh

want some red rams

hmm yeah thats cause he just looks for high clocks and what can run in benchies..

i wonder can he even do stable

eh..
something about ure tubing aint right dude..
mixing 1/2inch and 1/4th???


i suppose ure going to use the coolit freezone in the loop

since this is the best config.

tec[1/4]??? - pump (1/2) to cpu to res (1/2) to rad (1/2) to tec (1/4) and this is the part.. how u going from 1/4th to 1/2th on the mcp655??

unless ure going to do

pump [1/2] - rad [1/2] - TEC[1/4] to CPU[1/4] - RES [ 1/2] to Pump[1/2]
this dude is not a good idea mixing 1/2th and 1/4th barb on the cpu block.
and also having the pump before the rad.

dunno just find the whole thing weird.

unless u got the mcp655 mod kit..

This post has been edited by cstkl1: Mar 28 2009, 11:09 AM

eh swiftech packaging is very good.
and is packaged vertically.

i am pretty happy with mine..

linx at 5gb 11 rounds in the middle of the afternoon max temp is only 81C at 4.2ghz HT OFF. that 40 mins btw.. inside the casing but with the raven top removed.

a lot of ppl here dont even do linx more than 800mb..
try 5gb folks..

theres a reason y i got that rad..
first was having single pass/dual pass for this setup no difference as its low flow
second i wanted the res to be at the highest point.. aka no bubble.. so thats y bought the mcr220qp res.
the pump makes no sound now..

ure whole setup .. is questionable..
for the freezone i would have done the exact same thing but the barbs would have bought koolance 1/4th compression or straight.
make sure for the gtz u use the orings that comes with it... if not leakage.

no point using the mcp655.
and very trouble some because of one hardware u cannot run 1/4th tubes for the whole thing..
i would have bought the mcp655 mod kit with it or cheaper yet get the xspc pump and redo the molex cable to 3 pin so can be controlled by fan controller.

what long lead time??

u can get it at performance pc.
the barbs also koolance.

the rad.. didnt u read that big a4 paper warning u about it..

sishh.