hey dude whats with the running ram in single channel??

haul for the last month
just one more thing left



This post has been edited by cstkl1: Feb 8 2009, 01:53 AM

sishh if aura
if u said fuiyoh for that casing

what empire23 just posted..
dude just faint dude

kekek

---

Added on February 8, 2009, 2:07 amps faint with a joker smile but also eyes wide shock..

also havent tested it yet as cable management haven done anything yet
this was just 30 minutes work of assembling it just to check lengths

This post has been edited by cstkl1: Feb 8 2009, 02:08 AM

well initial review
the plastic build quality is damn good

cons.
cable management with this casing appears to be best for hx1000.
da1200 and op1000 dont think so.
need a very long sata cable for optical drive

infact seeing the ease to use this casing.. personal opinion my tj07 sux.
kekeke

oh yeah one major stupid con


the back of the casing has so much of space
yet theres no way to access it internally
they could have use that for some cable management also for the gc...

also this case i think is best with r2e and re.
first time the tweak it can be used with ease in a case.
think will actually leave the lcd poster in the case

This post has been edited by cstkl1: Feb 8 2009, 02:17 AM

assuming that first hd 1 is nearest to the mobo

officially the hot swappable cps is used at hd1
but i changed it to hd6

cause technically since all airflow is directed to the top.. my veloci and raptor will be 1,3,5 with swappable at 6.
placed raptor x at 1 for the look kekeke..

but without a hx1000 i think cable management in this casing will be ugly.
was planning to use the hx1000 modular cable for cpu but because of the sli i took up all the blue pin slots in the casing so no go.

again a lot of thinking and some buying to do.
cause need to find extension cable for the coolit pcb to be placed bottom near the psu

This post has been edited by cstkl1: Feb 8 2009, 02:39 AM

not with a i7 bro

even stock voltages keep warm enough from condensation

also make sure its a elite not the norm one.. but overall result i think it caps out at around 4.2ghz
anything above that linx is more than 80c

First in Malaysia

First in Asia

i wish it was 999..

so far the most expensive x58 board i purchased.

well for dfi especially x58 no point u go for dk /jr

the i7 proc and dram is very paticular for vdimm voltage.
hence y i had a issue running 2000mhz CL7 on r2e

the dfi UT is exact voltage.

oh yeah bachus the corsair engineer rated good x58 mobo with exact voltage

dfi x58 ut, gigabyte ud5, p6t deluxe.

he said the r2e and p6t varies a lot.

---

Added on February 26, 2009, 3:25 pmthis board is nuts
took me 6 mins to install vista 64 fresh.
at 4.2ghz veloci raid 0 ram 2000mhz CL7 1n

This post has been edited by cstkl1: Feb 26 2009, 03:25 PM

this is the first retail board

so ure telling me if i went over to us..
touched a nasa space shuttle

i am the first person in malaysia to have one??

kekeke

---

Added on February 26, 2009, 4:32 pmhmm somebody just asked me how many mobo's i used last year..
just realize a staggering number.

---

Added on February 26, 2009, 4:32 pmhmm somebody just asked me how many mobo's i used last year..
just realize a staggering number.

2009 already 4.

This post has been edited by cstkl1: Feb 26 2009, 04:32 PM

eh be specific

what u mean by installation

lyn 99% computer setup
cpa ayam casing+ mobo+proc+stock cooler+ahfat psu+ ah fat sdn bhd cabling + windows installation+driver+update
installation 10 -15mins
windows installation 30-1 hour depending on ram cpu hdd
driver download .. 4mbps line under 10 mins
update 1hour etc for windows vista ...

lyn 1% computer setup
usually buy ure casing first.
then see what wattage and psu design that will fit or think of both before u do anything. and then think of the cable management advantage
then look are ure mobo and look at the casing + psu cabling etc
then hdd sata's etc etc cooling option etc etc

infact just thinking before buying can take 2 weeks
and after getting all the stuff
just sitting there and thinking can take a few hours.
also always do one hardware at a time slowly.

my cabling always mobo must be clear and must be able to be removed to put in another mobo anytime i want with all the connectors at a fixed design
aka foxconn design so asus/dfi/msi/foxconn... gaygay is stupid.

480 is the CL8

mine is the 2000mhz CL7

are you a retarded??

first admitted that ure the 99% of lyn

now errr.
speechless


This post has been edited by cstkl1: Feb 26 2009, 11:41 PM

oops correct must be politically correct
are u a tard



This post has been edited by cstkl1: Feb 26 2009, 11:52 PM

kekek but can it do 775 2000mhz CL7 tRD 5:P

This post has been edited by cstkl1: Feb 27 2009, 01:17 AM

dont have to see a youtube when i talk to the corsair engineer

and worst part no idea what ure talking about in the first place
does anyone?

---

Added on February 27, 2009, 1:48 ami checked no dominator gt in youtube
thought it was funny in the first place
the ram theres like no more than 20 i think in the world and youtube has it??


This post has been edited by cstkl1: Feb 27 2009, 01:48 AM

what he is trying to say most ppl wont be able to make this ram work..

the crucial ram has nothing to do with this..

---

Added on February 27, 2009, 3:01 amalso ..
it depends on what ure gc setup and what ure proc speeds

---

Added on February 27, 2009, 3:03 amalso his head..
max long term is not 1.65v

also theres tons of ram that beats the crucial ram

the gt is a different class


This post has been edited by cstkl1: Feb 27 2009, 03:14 AM

yup only the elpida 50nm again i repeat 50nm can do 2000mhz CL8
they are not selling this in large quantities same as samsung hcf0
so u cannot find them in lower clocked rams.

eh i7 920 4.4ghz 1.375... hmmm

this is the fist off topic discussion.. is talking to u.