Pictures taken from: http://www.itocp.com & http://www.dfi.com.tw

Drivers

Bios

Product Page

This post has been edited by uzairi: Nov 13 2008, 01:26 AM

Some of my screenies on the overclock attempts.




Attached thumbnail(s)

What setting you use bro?
Can attach Memset screenie also.

-pWs-

Memset screenie for 450


Attached thumbnail(s)

dk p45 T2RS and T2RS PLUS are different models bro

@uzairi
Performance level make to "8"

-pWs-

Not that different

That's why i did not put the "Plus" at the title there so that non plus user also can participate.

Tomorrow i try

The only thing make me angry with DFI is they make DK box much more nicer than the UT model.. Damn DFI

DK FTW.

-pWs-

You prefer the box or the mobo ?

lol..dfi all oso nice lar..unlike gigabyte boring box..hahah...mobo oso nice...unlike other boards tat hav colourful thgy like tokong sayur truck..haha

some old results i got with this p45-t2rs plus just to support this thread

new result with e8400 E0 hopefully can come soon

VTT: 1.25v
VNB: 1.29v

gtl 0/2: 0.67
gtl 1/3: 0.61

nb gtl: 0.58

Nice results
I cannot even make it stable at 500FSB

490FSB was the last stable oc of my quad.



-pWs-

wah hardcore fan of 1 litre of tears detected

I think u reached the limit for your quad already bro.

This post has been edited by uzairi: Nov 13 2008, 08:13 PM

I wan to break 3.7GHz badly.

-pWs-

Dont try so hard bro later "kapooff"

lulz.... that one i jsut copy n paste from dfi thread ...

its old results actually....thats why she is there

newer results i get another drama or hot chick la


@ pws

u try suicide run liao ber?

Huhu...Dun la bro.
Too bad la. My q93 no price already and no buyer.

Damn wish to go q9450 o q9550.

-pWs-

3.6ghz is good enough for daily use bro but i do envy those Q6600 that can do 4ghz stable

Easy. Pump voltage kaw kaw. Do not see temp. Sure can.

-pWs-

LOL with LinX already reach 90c, if i push more sure reach 100c

90c only bro i thought u wanna achive 190c so envy la with my few days q66 damn hehehee anyway im proud of it even i never had a change loving it

i saw a nice chip q9450 in garage sales

Dont la be sad bro

Nice ar ?

I know.
But too bad. No buyer for my q9300

Yea...very nice.

-pWs-

its oem... that guy manage to run it on ibt 3.75ghz @ 1.25v iirc....

dammit! *goes to garage sale*

Yea...damn nice that proc.

Oits...tat is mine.

-pWs-

LOL

I just go and have a look only dont worry

Just joking
But that processor indeed good.

Who own it untung la dia? xD

-pWs-

Ya, if pushed hard enough 4.5ghz capable ?

erm...don think so gua.......


562.5 fsb for quad

but then seliously.... 4ghz is drooling edi leh ..


go sapu la bro ucai n help team almostthere

LOL i pokai already la bro, need to slow down a bit.. spending too much on pc stuff already

Then buy my Q9300.
More cheap ma.

I go for Q9450.

-pWs-

bad racun lol

uzairi ur system is Water Cooled? 1.52v hmm..

Yup, interested to try wc ar ?

Do you guys mess w "Fine Delay Step Degree"??

-pWs-

erm....where is that ar?

ram section?

lol just join here now

by da way wat is tat can u describe more clearly

Yea. Ram Timing section.

-pWs-

I dont :| Not sure what to do also lol

Default on DFI DK P45 T2RS Plus is 70ps
But i saw from DFK DK x48 T3RS is 5ps.

-pWs-

Maybe because of chipset and ddr3 vs ddr2 ?

Reason unknown.
Actually I just wonder is that help to overclock o not.

Tried clock skew. The motherboard just dun wan to boot up.

-pWs-

hi bro,me using DFI DK P45 T2RS Plus
but how can know my BIOS wht ver ....

bro can download CPU-Z:

http://www.cpuid.com/cpuz.php

Gives u all the info you need except temperature

ya bro CPU-Z can check my BIOS Version
thx your help o!
Then who can teach me how to flash my BIOS?


This post has been edited by CoolZone: Nov 18 2008, 01:04 PM

Winflash + .bin bios file is all you need.

ya bro ok after me update me will clear my cmos...
n how to backup ?bro...

can use ABS to 'backup' your abs profile. then clear cmos dy, load ABS again in windows, reload your profile, and u get it back =D

Why u want to flash the bios ?

before flashing ,load all ur default bios settings first...

then follow this guide for bios update via windows: http://www.dfi.com.tw:8080/portal/CM/commo.../winflash_en_US

if wana use thumb drive, follow this: http://tw.dficlub.com/tw/modules/newbb/vie...9#forumpost6679

thank your all very much o!

---

Added on November 20, 2008, 1:04 amhi can tell me how to up the vcore ?
me up my E8500 FSB 400 make the test erro my vcore 1.216? wht problem...

This post has been edited by CoolZone: Nov 20 2008, 01:04 AM

The tips is that you need to watch 1 Liter of Tears while tweaking it jkjk

Aside from vcore, try to play with the vnb and vtt.

Yeah...

vDimm as well.
Show us some screenie.

-pWs-

With 1 Litre of Tears ss in it

ok me will try up the vnb and vtt

hiii everybody...new user here...a little bit pening with the bios..he3...

wahh sudah start engine ha bro

tengah belajar merangkak ni...he3...

some reference for those who are new to this mobo....but this is old guide tho....

http://www.clunk.org.uk/forums/hardware/32...therboards.html

http://www.clunk.org.uk/forums/overclockin...rs-dfi-add.html

thanks thk_1001...need more info for this mobo..lots to learn...he3

Hey guys, do any of you use RAID with this board?

Mine shows "ACHI not installed!!" when the raid controller boots. Also the BIOS version shows ICH9R wRAID5. Do any of you face this same problem? (I thought it should show ICH10R wRAID5!!)

Apart from that I cannot boot from USB-CD-ROM anymore when I set it to RAID. So all I get is INVALID SYSTEM DISK.

Please help!

This post has been edited by jetyap: Dec 21 2008, 01:28 PM

There is no problem in this.


USB CD-Rom. How come will related to USB?

-pWs-

I don't have a permanent CD-ROM. I use a USB-DVD Writer.

The point I was trying to state was that I could not get it to boot according to the boot list after I set the SATA settings to RAID or ACHI. Everything works fine while it is in IDE mode.

anyone running q9550 with this mobo??can share bios setting to run 4.0ghz??want to make it as a guideline...

How bout point the USB device to 1st booting priority?

-pWs-

Here's the worst part. Nothing works properly after changing to RAID or ACHI. The boot priority does not work.

The only way I can boot into OS or USB-CDROM is via ESC. I read at dficlub that the Oct 2008 BIOS is not working properly.

Oh. I see.
Then it is time for internal CD-ROM drive.

-pWs-

boot from ur usb stick bro jet

Applicable for JR version? My E84 C1 cant go 4GHz stable

try up ur vcore...or post ur setting here...

mus, how's your oc ?

u shud able to OC 4.0GHz... My e8200 C0 can on DK-P45-T2RS+... Try check ur setting...

Try to raise your vnb, that help a lot on my oc. Vtt i just leave it at stock.

just clik my cpuz sig..that for now maybe next time after install my nb and mosfet wb...

Any 3dm06 benchie to share

Stable with LinX ?

not yet bro..he3..need more tweak....come help me.....

try add bit by bit to Vmch n Vtt n pump Vcore oso...Haha ^^

Not stable yet ar ?

yup..at 4.3ghz need more vcore to boot windows...just touch the red zone... any idea???

This post has been edited by mz2926: Jan 8 2009, 05:16 PM

red zone ntg wan la if u hav gud cooling system....

hmmm...so far my temp look steady...full load around 63c....but still scare to look at the vcore...he3

Hi all DFI P45 mobo owner,

do you guys still having double post issue
like those P35 mobo last time?

wanted to know as wanna change to P45 soon.

rgds,
albert

I dun hav any. But will take longer time to boot if overclock.

-pWs-

Mine 3.6 @ 1.45v 100% load 62c noon

waaaa....nice temp there with that vcore..mine just try 1.49v..full load goes to 72c dont dare to continue...now go back to 4.0 only... with 1.39v in bios...temp around 60c at full load...might stick with this for 24/7...

anybody tried oc an e7200 with this board?

i dont have double boot issues. but mine us DFI P45-T2RS JR

i just bought this board today(DK P45 T2RS PLUS) but when i try to power the board on,standby led are not lit and when i remove the power cord,high pitched sound can be heard coming frm the board..dunno frm the speaker or the cap..heard a sound of high capacitance cap discharging b4..so i assume its frm the cap..im using e7200 and cheap icute 450w psu..dun hav money to get nice true power psu yet ..any bdy can help me?

This post has been edited by nicotyne: Aug 23 2009, 12:40 AM

hallo guys ,, anyone have a link for P45 T2RS PLUS BIOS ,,
i want to update my bios but i couldn't find bios link

thanks be4