Yup, even my old brisby BE works fine at 3.0ghz using 1.325v...
1.4v should be able to hit higher than 3ghz ler..

for my dear old Venus, i can clock till 2.8Ghz with VCore 1.4. Base 2.0Ghz

@mruzian

yaya.. try it and share here...
more Vore will make ur proc temp high... get a nice value for it..

Sorry for noob question here.

BE have unlocked Multiplier. so it's free to tweak isn't it?
So, what about the voltage? is it unlocked too?

Of course. vCore still can be tweaked.

-pWs-

what the minimum overclocking for 4200+ brisbane??

Minimum??
Go and hardcore it. Then you will know how much your proc can do.

-pWs-

i already do it...
only can reach 2219.3mhz core speed, but i try to up it...
but i cannot reach a list for the brisbane group

Lower down your divider and try again.
It might be limitted by your ram.

Show us the screenie of the speed achieved.
CPU-z (CPU & MEM) & Memset (if possible)

-pWs-

ok i will try again, thnks for ur information...

what's your multiplier and your clock speed?

here's another screenie @ 3.2ghz wit 1.35vcore
but sumthing is not rite...smart guardian put it @ 1.47 and cpuz put it @ 1.2
maybe got sum bug...

WOW. Mruzian....... the temp is still in good state for 1.47 VCore.

Is it able to push it some more?

my proc can oc?
how much can oc?
do i need change the proc cooler?
after change the proc cooler,can oc how many ?

act i put the vcore 1.35@bios...dunno why it detected as 1.47...if u look at the
cpuz screenie oni 1.20

Your Athlon 6000+ sure can OC. The amount you can OC depend on your mobo and mostly your guts
i even OC my 2.0 Ghz Venus to 2.8Ghz with only stock HSF. For stabily on OC, Vcore is important


I see.....is it due to BIOS bug?

This post has been edited by amane_kaoru: Oct 18 2008, 03:35 PM

you using same mobo@proc as mine~

Ur F3 is what batch??

nice clock there but did u change the chipset cooler??

our mobo easy hit 60+c ~

p/s: what bios u use?? modded or official latest?

This post has been edited by tachlio: Oct 18 2008, 03:41 PM

the Mobo Chipset sure will heat up greatly, for safety, i add a 8cm chassis fan,
and blow down the fire pit.....

the temp reduce very well with a help of a chassis fan on the northbridge.

hehe juz notice it it bro...same mobo n proc
mine 3rd batch i think

as for the chipset, still using the stock one...thinking
of changing it to evercool vc-rf but couldnt find a used one forum haha...maybe later
u change urs?

currently i'm using official bios 2/12/2008...but maybe wanna try modded one later

Hey guys and girls, I just got a X2 5K BE for myself. I got a problem with it.

So far i stable on 200x16 @ 1.425vcore. (3.2GHz)

Tried 200x16.5 or 220x15 @ 1.45vcore, 1.475vcore. (3.3Ghz) will random bsod.

And tom's hardware review that this proc easily hit 3.4GHz just changing the multiplier and add vcore

Any ideas?

Thanks..

This post has been edited by Liuteva: Oct 18 2008, 03:55 PM