[WTA] E8400 E0 o'c, can share ur vcore @ 4.5ghz?
|
|
 Oct 11 2008, 02:34 AM
Return to original view | Post
#1
|
 
Elite
4,746 posts Joined: Dec 2007 From: Speed rule  
|
QUOTE(168257061 @ Oct 11 2008, 12:11 AM) [attachmentid=624546] Screw orthos when pass IBT idle [attachmentid=624547] load both @ 1.275v bios set. p35-ds3 rev.1 sunbeam core contact freezer with stock fan. *will post a stable on orthos screen shot after.   |
|
|
|
|
|
Oct 11 2008, 01:21 PM
Return to original view | Post
#2
|
|
Elite
4,746 posts Joined: Dec 2007 From: Speed rule
|
QUOTE(tkh_1001 @ Oct 11 2008, 03:05 AM) lolz....ur proc is even better than my e8600 From allngap,OEM all thumbs for u  OEM or retail ar? |
|
|
Oct 11 2008, 05:52 PM
Return to original view | Post
#3
|
|
Elite
4,746 posts Joined: Dec 2007 From: Speed rule
|
QUOTE(168257061 @ Oct 11 2008, 02:12 PM) 1.4~1.41 Decent C0 chip  Maybe my ex E3110 will beat  |
|
|
Oct 11 2008, 11:04 PM
Return to original view | Post
#4
|
|
Elite
4,746 posts Joined: Dec 2007 From: Speed rule
|
QUOTE(168257061 @ Oct 11 2008, 05:55 PM) E3110 running lower voltage ? My ex gem E3110 can do 1.25V 4ghz 3dm06 stable  |
|
|
Nov 3 2008, 07:37 PM
Return to original view | Post
#5
|
|
Elite
4,746 posts Joined: Dec 2007 From: Speed rule
|
[quote=zuhair,Nov 3 2008, 12:44 PM]
@zuhair 1000 cl5 @ 2.1vdim? wow...dats high would u like to share some of ur flex results? i heard the older version can do miracle  [/quote] this is flex pc9600 - the standard rating is 55518 @ 1200 - 2.10v (non micron). had it at 1290 55515 @ 2.1v stable in bios, set @ 1.28175v. LLC enabled. idle @ 1.260v, load @ 1.272v same as above all setting are with LLC enabled screenshot @ 535X8 @ 1.408v load + 1284 55515 PL8 @ 2.10v 20pass of LINPACK v1.80 [attachmentid=656246] screenshot @ 480X9 @ 1.416v load + 1280 55515 PL7 @ 2.10v 5hours of OCCT blend [attachmentid=656248] [/quote] Not bad not bad. The sustainable PL is good for 535FSB You run these setting daily??Run 1:1 as the performance gain is not much but lifespan of ram make difference,just what i think lah |
| Change to: |  0.0197sec
 0.26
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 07:35 AM |
Quote