dear all,

im planning to upgrade my iphone (2G) 1.1.4 to 2.0 FW, i have been searching a lot of sites but still confuse, can give me some quidance?

thanks

Ok. First, go through the following link and download the necessary files & applications such as Winpwn 2.5, boot logos (for iphone reboot and recovery mode), Bootloader images 3.9BL and 4.6BL and iphone firmware version 2.0 to which you want to upgrade. I just upgraded few days back to 2.0 and I strongly recommend upgrade ONLY up to 2.0 firmware and not 2.0.1, 2.0.2 or 2.1 versions.
http://forum.lowyat.net/topic/773801

Now, follow this guide (for WINDOWS users only)

http://www.iclarified.com/entry/index.php?enid=1755


**For Mac OSX, different softwares need to be installed on the pc first to upgrade. Please read this

http://forum.lowyat.net/topic/790913

and follow this guide

http://www.iclarified.com/entry/index.php?enid=1557

You need to upgrade first and then only u can unlock, jailbreak it. Upgrade, unlock and jailbreak instructions are mentioned in the above guide links provided. Please read them carefully. I assume that you have iTunes 7.7 or above installed on your system before you proceed.

Hope this makes it easy & clear for you Good Luck!

This post has been edited by alpha_boy: Sep 20 2008, 04:55 AM

LoL...u shouldn't upgrade to 2.0..
The best and most stable for the moment is 2.0.1 for windows user..
and 2.1 for MAC users...

Please read post#1 & 316 by davidgary73

http://forum.lowyat.net/topic/773801/+300

You can go through the whole thread if still not convinced Anyways, it is really funny to hear that higher firmware version is stable and previous version isn't. Never read that before in case of firmwares or software applications too.

This post has been edited by alpha_boy: Sep 20 2008, 05:07 AM

quickpwn for I'm a pc dah kuar.

hi there mals. have u pwn your iphone before this? or this is your 1st time?

if you new, please follow this guide.

recommended using basic mode since winpwn 2.5 provide user either using basic or expert mode.
follow trough the guide and make sure you have the pre-requirement before performing it.

requirement: u must be on itunes 7.7 which is for firmware 2.0, 2.0.1 and 2.0.2. a valid 2g iphone firmware (if u using the 1st gen iphone) and also the bootloader of 3.9 and 4.6. and of course, winpwn 2.5

winpwn concept is very simple. the program modify the firmware it self to perform activation, jailbreaking and unlocking. also known as custom firmware which is been modify earlier before you install it on your phone. this method is considered the safest way to obtain status of a/j/u without any risk of bricking or damaging your iphone. if you do the right way of course.

reminder. once you update it up to 2.0, revert back to 1.1.4 state is quite difficult.

good luck mate
and selamat bersahur


p/s: wah, u guys really fast providing guide.. lot of sifus now day ^^". still waiting for winpwn 3.0 and advance to latest firmware

This post has been edited by potion: Sep 20 2008, 05:16 AM

I know that 2.1 isn't that good for jb now..
But 2.0.1 is definately better than 2.0 as it fix the 2.0 lagginess..
I myself is using 2.0.1..

I have upgraded to 2.1 and also jailbroken it..Its working but cant call out or receive call as there is no signal in the signal bar..what should I do?

well thx for all the guide but im blur in 1 part, at the DFU, i follow this tutorial http://theiphoneproject.org/index.php/faq/...winpwn-20-guide until the DFU, but when i enter DFU my itunes 8 wont open? i hv followed all the steps properly

---

Added on September 20, 2008, 10:39 amso do i need to upgrade the fw to 2.0 or 2.0.1 or 2.0.2?confuse but definetly not to upgrade to 2.1 rite

This post has been edited by mals: Sep 20 2008, 10:39 AM

Post Deleted.

Cheers

This post has been edited by davidgary73: Sep 20 2008, 02:31 PM

easy davidgary73. easy davidgary73

orghhh..!!!
first time..i saw davidgary being the second stringfellow...LOL
sifu string..peace ya!puasa~

so now the fw 2.1 can officially being used instead of 2.0.2 rite bro?

---

Added on September 20, 2008, 12:02 pmbro davidgary73 trying to correct what is wrong, nice help bro

This post has been edited by mals: Sep 20 2008, 12:02 PM

lol davidgary..hehe..cmon..cool man..dont regret for wat.. just let it be..some may agree some may dont..but nvmind them. : )

@xTraVagaNza and mals

Nah..No use explaining. Let everyone has thier own say la..cheers.

This post has been edited by davidgary73: Sep 20 2008, 02:30 PM

haha..okay2...fine..but,hey..u can also hav ur own say/words though.. =P
nvm..just kidding..

"search for the truth..once you found the truth, it would set you free"

p/s read my signature, u'll find what you looking for

This post has been edited by Corvinux: Sep 20 2008, 04:26 PM

owh...hahaha..okay2...understood...kehkehkeh..cool sig..

hello ..having a question here..can i upgrade my iphone (2G) 1.1.4 to 2.X FW
using Winpwn 2.5 and with itune version 8.0 ? anyone tried b4? or i need to install version 7.7 itune to upgrade my iphone?

Noob!!!