why winpwn 3 taking so long... almost 3 weeks now

@Schattenjeager

please do recheck ur antivirus/firewall since it can block program from running and prompt similar error message as yours

cheers

This post has been edited by potion: Nov 10 2008, 07:54 PM

great welcome aboard

i just finish upgrade my gf firmware 1.1.4 to 2.1 with a sucess :thumb:
and manage to install all :ehem ehem: thing inside

your iphone is lock again after the update. you have 2 option which are
1. wait for the dev team release the pwnage tools & quickpwn
2. restore back to firmware 2.2.1 or older by following guide posted on the pinned thread

for those who is currently using iphone 2g wanted a head start with firmware 3.0, you can try this guide for maintaining the activate status on 3.0

here goes

http://www.ihackintosh.com/2009/06/unlock-...-final-version/

but not recommended for those who don't really know what what his/her doing. i succeed following this guide just a second ago and im on 3.0 now.

cheers

---

Added on June 19, 2009, 1:18 amand yes, your can downgrade just by using shift + restore to a recent firmware which is 2.2.1. make sure your iphone is in DFU state. not sure for older firmware though.

This post has been edited by potion: Jun 19 2009, 01:18 AM

here is a short guide downgrading/restoring your 2g iphone to firmware 2.2.1
things you need.
iphone 2g firmware 2.2.1 available here
itunes 8.1 (optional)
quickpwn (since you use windows) available here
bootloader 3.9 and 4.6 (BL-3.9.bin and BL-4.6.bin)


step 1.
since your phone is stated lock, put your iphone in DFU mode. plug your phone on the usb cable
hole power/sleep and home button for 10 second. then release the power button (still holding the home button) until itunes detect your iphone in recovery state.

step 2
shift + restore and direct it to the 2.2.1 firmware and itunes will start restoring your phone (ignore some error syntax stated with 1xxx).

step 3
fire up quickpwn and run as instruction stated. use the bootloader given above. if you successfully follow this guide, you iphone should be up and running on stated firmware.

good luck

cheers

DFU stand for Device Firmware Update.

browse here for more information http://www.iclarified.com/entry/index.php?enid=1034

=D

not a problem. so how was your iphone doing?

im afraid it happened to you as well.
try using itunes 8.1.1 and restore your iphone again with firmware 2.2.1

success unlock and jailbreak my 2g with redsnow 0.7.1.

1st attempt was fail due to redsnow 0.7.1 stop responding in an instant when the screen prompt "downloading jailbreak data".

i then re-enter the iphone to DFU mode and try again with successful result

thanks and cheers