Outline ·
[ Standard ] ·
Linear+
Pwnagetool/Quickpwn & "yellowsn0w" 3G Unlock, »2G/3G Fw 2.2.1 Unlocking&Jailbreaking«
|
Edoras
|
 Jan 4 2009, 09:02 PM
|
|
QUOTE(friedbeef @ Jan 4 2009, 06:53 PM) Has anyone managed to get this to work on local Telcos yet? I'm on Maxis and Yellowsnow v0.95 ain't working for me so far... Upgraded to 2.28, jailbroken with QuickPwn, downloaded and successfully installed Yellowsnow v0.95 - Cannot get a carrier signal from Maxis.... Yes - I have managed to "yellowsn0w'ed" my iPhone 3G. I'm on Celcom. See --> HERE |
|
|
|
|
|
Edoras
|
Jan 4 2009, 11:15 PM
|
|
|
When you see the "searching" signal, wait for 5-10 seconds (or slightly more). If it fails, try again switch on/off the Airplane Mode.
I'm using yellowsn0w ver 0.9.5
|
|
|
|
|
|
Edoras
|
Jan 10 2009, 09:49 AM
|
|
|
QUOTE(klsmurf @ Jan 10 2009, 09:11 AM) Found my problem. Yes. I ran pwnage with the latest downloaded firmware. BUT the baseband didn't get updated 02.28. (i didn't previously update the firmware thru iTunes) Just launched iTunes to do a restore and Streamyx has just slowed to a CRAWL!!!  I'll re-jailbreak again after this restore and try the unlock again. Don't pwnage with the firmware/baseband downloaded from iTunes. Just use this method --> How to Jailbreak Your iPhone With QuickPwn (Mac) [Updated 2.2] |
|
|
|
|
|
Edoras
|
Jan 10 2009, 12:14 PM
|
|
|
QUOTE(Dozz @ Jan 10 2009, 11:47 AM) anyone successful jailbreak your iphone with new macbook? - You have NOT BEEN reading my post... Read above replies.. |
|
|
|
|
|
Edoras
|
Jan 12 2009, 10:29 PM
|
|
|
QUOTE(giorgene @ Jan 12 2009, 10:22 PM) Hi, everyone mention about the US or UK set can be unlock, what about the japan softbank iphone? Should be the same... |
|
|
|
|
|
Edoras
|
Jan 14 2009, 06:22 PM
|
|
|
QUOTE(gempz @ Jan 14 2009, 03:59 PM) tried both but still not working....tried with simcard inserted and no simcard, still no changes.. already JB for seventh times, using quickpwn, winpwn, ziphone.... anyone..plz?? Are you 100% sure your maxis simcard is not blocked by Maxis? Have you tried using another simcard? |
|
|
|
|
|
Edoras
|
Jan 14 2009, 11:58 PM
|
|
|
QUOTE(cyt @ Jan 14 2009, 09:56 PM) hi guys, kinda noob in updating firmware here....wanna ask few questions.. 1) is it necessary to update my firmware to 2.2 coz im still in 1.2 now...whats the difference and do i need to jailbreak and unlock it again 2) how cydia differ from installer coz now my phone(jailbroken) is still using the installer but the number of apps seems to be almost the same everytime i refresh..need to add more source mayb?? thank you Do you owned an official unlocked phone or locked ones? If you are locked set with turbosim solution, better upgrade to FW 2.2 and JB again. You can add more repo for cydia to get more apps. |
|
|
|
|
|
Edoras
|
Jan 15 2009, 06:43 AM
|
|
|
What kind of error message?
|
|
|
|
|
|
Edoras
|
Jan 21 2009, 08:58 AM
|
|
|
QUOTE(Rinyuu @ Jan 21 2009, 02:09 AM) i followed from david link iclarified n also from MMI. I think i will try in windows. Is it becos of my OSX 10.5.6? i just formatted then install new leopard then i upgraded to 10.5.6. I also installed OSX DFU Fix, but it got nothin to do if im not in DFU mode .  I have a similar problem and the OSX DFU Fix does not solve the problem. In fact, it does more harm to my MBP. The reason being, its 10.5.6 bug ... and the easiest solution is to use a USB Hub to connect your iPhone to the Mac. Hope this helps.. This post has been edited by Edoras: Jan 21 2009, 08:58 AM |
|
|
|
|
|
Edoras
|
Jan 21 2009, 10:31 PM
|
|
|
QUOTE(Rinyuu @ Jan 21 2009, 10:08 PM) I TOTALLY AGREE WITH U. N again today i have to reinstall leopard. At first i thought maybe my macbook never reformat since i bought it. Sympton were after i installed OSX DFU Fix then i restart few times suddenly it hang. I cant use my mouse n keyboard. I thought maybe crash with other programs but last nite it was fresh leopard after restart it happen again. i realised that OSX DFU Fix didnt reboot after i installed it. It just dissapear after it closed some other programs.Suppose it will reboot as i read in instruction. Any ideas bro? Eerrr...just normal usb hub?no need special hub? Yes, that's what happen to my MBP when I installed the OSX DFU Fix - trackpad, keyboard and mouse not functioning at all!! I was so frustrated that I have to revert back to my last full backup (luckily I have Time Capsule) but I lost a day to do that. I read a solution in the Internet that mentioned about a simple solution using a normal USB hub (even tho' I owned a powered USB hub). Check this out --> HEREPlease try.. and good luck, bro! This post has been edited by Edoras: Jan 21 2009, 10:34 PM |
|
|
|
|
|
Edoras
|
Jan 22 2009, 07:15 AM
|
|
|
QUOTE(squarefight @ Jan 22 2009, 02:18 AM) i have 1 question why after i dont all the step of JB i still cant detect my network ??? i still can do call out and sms. pls help me thanks If u can call out and sms means your iphone can already detect the network. |
|
|
|
|
|
Edoras
|
Jan 22 2009, 03:03 PM
|
|
|
QUOTE(squarefight @ Jan 22 2009, 02:31 PM) opss sorry typo error is cant detect the network signal sorry all hahah.. what happend to my iphone ah ?? If you have a locked iPhone, you need to JB and then UNLOCK it. JB is not sufficient. |
|
|
|
|
|
Edoras
|
Jan 22 2009, 03:24 PM
|
|
|
QUOTE(squarefight @ Jan 22 2009, 03:21 PM) errrr idont know which generation is it but i can tell it is white colour and 16gb from uk That's an iPhone 3G (if not mistaken white iphones are 3G version). But yours is definitely need to be unlock. Download "yellowsn0w 0.9.6" from Cydia. Install and reboot. That's enough to get the signal. With the condition you have upgraded to firmware 2.2. |
|
|
|
|
|
Edoras
|
Jan 22 2009, 06:59 PM
|
|
|
QUOTE(squarefight @ Jan 22 2009, 03:25 PM) hmm one more qestion how to unlock the phone ya If you are not the person that do some research on how to unlock, might as well forget about it and better to ask someone else to do it for you (and pay for the service). This post has been edited by Edoras: Jan 22 2009, 06:59 PM |
|
|
|
|
|
Edoras
|
Jan 26 2009, 11:52 AM
|
|
|
QUOTE(phili3 @ Jan 25 2009, 10:36 PM) hi thr, after i jailbreak, how do i format the phone in the future ? need to do all the things again ? Don't think like a "PC"... coz PC always need to Format...  |
|
|
|
|
|
Edoras
|
Jan 26 2009, 06:18 PM
|
|
|
Yeah... some people just "cried for help" without even give some details but expecting people to come to rescue... If you refer to http://forum.lowyat.net/topic/790913 at which step did you get this error? This post has been edited by Edoras: Jan 26 2009, 06:22 PM |
|
|
|
|
|
Edoras
|
Jan 26 2009, 08:01 PM
|
|
|
QUOTE(cecil.mcbee @ Jan 26 2009, 07:21 PM) it's from us.i hv upgrade to 2.2 from itunes,and after process the Quickpwn22-1, the screen keep appear apple icon and i can't even switch it off also If you are using Quickpwn for Mac, use this method --> http://www.iclarified.com/entry/index.php?enid=1842If your Mac hangs, most probably you are using 10.5.6. You need to use USB hub to connect the iPhone to Macbook Alu. |
|
|
|
|
|
Edoras
|
Jan 26 2009, 08:48 PM
|
|
|
QUOTE(cecil.mcbee @ Jan 26 2009, 08:23 PM) i'm not mac user,i'm windows user,not my mac hang,is my iphone hang Windows Vista? |
|
|
|
|
|
Edoras
|
Jan 29 2009, 06:07 PM
|
|
|
QUOTE(blugear @ Jan 29 2009, 05:13 PM) Question: 1) Is it possible to unjailbreak after jailbreaking the iphone 3G? 2) After I jailbreak my iphone 3G officially unlock version, can I sync back all my data like calendar, contacts, music, video etc to the iphone in Itunes? 1 - Yes, just do a restore. 2 - Yes, you can sync. |
|
|
|
|
Quote
If its mind reading, I'm sure they are genius enough to jailbreak the iPhone.. 
0.4001sec
0.68
7 queries
GZIP Disabled