Jan 12 2010, 01:44 PM
QUOTE(andrekua @ Jan 9 2010, 07:06 PM)
Anyone using Hyper 212+ with E8400/8500 c0?
I was previously using OEM cooler from Coolermaster (those annoying 4000RPM *******). Had my E8500 overclocked to 3.8GHz with 1.25v and temp at full load is around 72~75C depending on weather. Case is closed with one intake and one outtake fan.
Now fitted 212+ with dual fan configuration. Due to heatsink too tall, I didnt close my casing but effectively unable to use any intake or outtake fan. I overclocked slightly more to 4GHz (422x9.5) with 1.35v (but showing 1.30v only @ full load). Temp at full load is kinda high @ 65C max (without a/c). Did I do anything wrong? I feel the temp is kinda high though. I did try lower the Vcore by 0.5v in the bios and it cools down a lot but unable to pass Prime.
Is my temp normal, within range? I thought I should be getting 40-50C max with it.
Nothing wrong with that, i had the same E8500 C0 processor and using Hyper 212+ too.I was previously using OEM cooler from Coolermaster (those annoying 4000RPM *******). Had my E8500 overclocked to 3.8GHz with 1.25v and temp at full load is around 72~75C depending on weather. Case is closed with one intake and one outtake fan.
Now fitted 212+ with dual fan configuration. Due to heatsink too tall, I didnt close my casing but effectively unable to use any intake or outtake fan. I overclocked slightly more to 4GHz (422x9.5) with 1.35v (but showing 1.30v only @ full load). Temp at full load is kinda high @ 65C max (without a/c). Did I do anything wrong? I feel the temp is kinda high though. I did try lower the Vcore by 0.5v in the bios and it cools down a lot but unable to pass Prime.
Is my temp normal, within range? I thought I should be getting 40-50C max with it.
Temp around 70+ºC at 3.8Ghz with auto settings on Linpack stress. Voltage around 1.25V or 1.28V, not so sure.
Quote
0.0461sec
0.55
7 queries
GZIP Disabled