My Killer Whale on Biostar tpower TA790GX 128M
Getting ready for HTPC built


Attached thumbnail(s)

i juz bought tis cooler.force it to fit in a tp43hp wit a lancool k7.the fin is kissing the psu bracket..
the first result is very nice,idle 37-38c ,load 51-53c..
but after few hours..idle 39-40c,load 65c..when i start full load,temp straight increase till 51c ,and the end is 65c.
wat problem? @@

ur casing's heat is circulating in ur casing
this is normal for down blown type cooler
try enhance ur casing air flow would settle the problem

The fan looks weird

u can always change to any 12cm fan of ur choice

anyone care to show their pic of...

killer whale on amd board?

This is on amd board
http://forum.lowyat.net/topic/777616/+42

will KW stand 2gahter with sunbeam CCF ??

thking wana get KW but dunoe how with its performance..
if performance good thn will be nice to go..

waiting for the review between KW vs CCF..
hope thy can stand 2gahter thn will be good for a trying on KW..

This post has been edited by cdlim87: Oct 29 2008, 03:19 AM

KW is on par or pwn CCF.
I do however know,OCZ Gldiator Max pwn both of them

wow..
thats new cooler frm OCZ ???

come on..!!!!
vy vy vy interest to noe the result of the review...

edit:
eh.. i get the review from HERE

seem that OCZ not done vy well only.. mayb u do some review n share wit us..

as this type cooler's installation way almost same as xigmatek, where for AMD user by using tool free clip will make it blow up only..

persanally prefer blow out(backward **CCF) or blow down(KW) that hv side effect cooling

This post has been edited by cdlim87: Oct 29 2008, 02:11 PM

bryan also got review

hehe not so pwn la bro

At least that what bryan told me lor
For future OCZ Gldiator Max owner,change the fan to mid or high speed yate loon should be a must
Stock fan is as awful as what it can get

y awful?

how many cfm wor? 40?

hmm... if this type of HSF(tower type) with more higher CMF fan sure will perform beter... if can apply push-pull concep(double fan) thn lagi nice...

**pull more thn push will be beter

This post has been edited by cdlim87: Nov 1 2008, 03:23 AM

.15a only,2x-3xcfm
One more thing,gldiator max need a backplate or else it won't perform i guess

ya.. but i thk its tough to put backplate mayb..
---------------------------------------------------------------------

eh,, how with our coolice bro's test on the cooler ya.. long time no news..

really waiting for their review result..
especially CCF vs KW...

just bought killerwhale yesterday at imbi,just 155. ..happiness turned into tragedy..iv mistakenly touched the fan while its run in full speed and its BROKEN!!!!! MAMA~~~! my 800km journey to buy this thing..sob... lol i nearly wanted to trow it away,but then my eyes caught on gam cap gajah. I tried to fix it n its runnin again! xDDD.

Iv tested it on my e7300@3.5ghz 1.32vcore. running occt n everest, max temp after hours around 68c at 30c ++ room temp at afternoon(usually +10c compared to temp at night). Tested it with prime95, 77c max . idle at 48c. with just 2 coolermaster 12' fans. i think i should fix my airflow more after this or maybe a new casing..working on it now..

wow... KW with only RM155..!!! wat a good price there...

but the fan so weak ar? crashing at 1800rpm break oledi...?? so dangerous....

btw where u come frm?? 800km?? johor or kedah? me Kedah'an

This post has been edited by cdlim87: Nov 1 2008, 07:27 PM

Im from kelantan, still studyng here. Haha..btw its not touched by my hand, its my casing lid..lol. I tried to modng my casing at that time, its happen when i tried to measure the position of that heatsink.

Now at 8pm, idle temp @ 42c, load using prime95 @ 68c. Im using tunic x2 paste, is there any better paste other than this?