i use v8 before, not so great bout its performance. better go for megashadow. pretty sure 1156 can use liao.
ask asamkipas or piumiu. both already use on GD65 mobo i think.

megashadow is the best of the best! google,wiki,anything oso show megashadow/megahalem is the best (except IFX14 ).

but didnt come with fan, fan is optional. trust me, megashadow is the best!

Q9XXX, Xeon 33XX, intel quaddies.

QX6XXX can post here?

if got specific thread for QX only. only little will post.

will try post 4ghz stable later or high fsb. hopefully.

when start priming, will straight restart. what could be the reason???

in dual (2 core disable), 500fsb no prob. but on 515fsb wont do.
enable 2 core (quad), will straight restart when priming.
already try
1.6v Vcore
1.50v vmch
2.2v vdimm
ich core 1.2v

if priming then straight restart. what could be the reason?? cpu ref at 67, mch ref at 63. still no good~

help me here~



This post has been edited by uzer85: Jan 8 2010, 12:18 AM

gonna try more tomolo. 4ghz stable is my primary target.

sigh. will try reading from A to Z bout overclocking again. maybe tertinggal some ilmu penting.

cant seem to get stable OC. will straight/after 3-8 seconds reboot.

be it 400x10,450x9,500x7. can boot but cant prime. FML!!!

Robust Graphics Booster.........................[ Turbo ]
CPU Clock Ratio.................................[ 9 ]
Fine CPU Clock Ratio............................[ auto ]
CPU Frequency 4.05GHz (450x9) --------tried 400x10,500x7 already

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 450 ] tried 400x10,500x7 already
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]

***********DRAM control*******

Performance Enhance.............................[ Standard ]
Extreme Memory Profile (XMP)....................[ Auto ]
(G) MCH Frequency Latch.........................[ 333] tried 400,266 already (on different setting though)
System Memory Multipler.........................[ cant remember ]
Memory Frequency 1066...........................[ 900 ] tried 900@1030@1000 already
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15 ] even tried @5-5-5-18 @ 6-6-6-18

Load-Line Calibration...........................[ Enabled ]
CPU Vcore [ 1.25000 ]...................[ 1.45] tried 1.4-1.55v (1.6v wont boot)
CPU Termination [ 1.20 ]...................[ 1.46 ] (tried 1.3-1.6)
CPU PLL [ 1.55 ]...................[ 1.57 ]
CPU Reference [ 0.760 ]...................[ 63%@66%@67%@68% ] all already tried

MCH Core [ 1.100 ]...................[ 1.46 ]
MCH Reference [ 0.760 ]...................[ 63%@66%@67%@68% ] all tried liao
MCH/DRAM Reference[ 0.900 ]...................[ Auto ]
ICH I/O [ 1.500 ]...................[ Auto ]
ICH Core [ 1.100 ]...................[ 1.2 ]

DRAM Voltage [ 1.800 ]...................[ 2.2 ] tried 2.1-2.36v
DRAM Termination [ 0.900 ]...................[ Auto ]
Channel A Ref [ 0.900 ]...................[ Auto ]
Channel B Ref [ 0.900 ]...................[ Auto ]
__________________

can anyone spot wtf is wrong with my noob setting?? all can boot but cant prime. straight reboot.

sifu-sifu semua?

did u stress it?? prime95 is the way to go~

CoolerMaster Hyper 212+. rm120 (i think). perform on par with CCF i suppose.

still didnt succeed. use this currently~ (damn, hit 4ghz prime sure fail)

430x9 = 3870ghz stable.



This post has been edited by uzer85: Jan 13 2010, 01:30 AM