newbie here..just bought Q9550...huhuhhu..then terus oc..currently stable prime95 for 4 hours...
is it ok my setting for Vcore,Vtt etc?
Prime95
BIOS Setup
Intel Q9xxx and Xeon 33x0 Family, Show the rest what Intel Quadies can do!
|
|
 Mar 1 2010, 03:21 PM
Return to original view | Post
#1
|
 
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda 
|
Hi Guys...
newbie here..just bought Q9550...huhuhhu..then terus oc..currently stable prime95 for 4 hours... is it ok my setting for Vcore,Vtt etc? Prime95 BIOS Setup |
Quote|
|
|
|
|
Mar 1 2010, 06:15 PM
Return to original view | Post
#2
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
is it this consider my system stable?
|
|
|
Mar 1 2010, 09:48 PM
Return to original view | Post
#3
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
this is i can do for my Q9550...set my ram to 2973MB...
is it ok? |
|
|
Mar 15 2010, 08:04 PM
Return to original view | Post
#4
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
QUOTE(salimbest83 @ Mar 2 2010, 05:58 PM) huhu.. maybe you need give some extra juice to your ram...2.1v me dont event have chance to hit more than 3.76Ghz.. maybe my cheapo kingbox ddr2 800 doesnt cut it?   |
|
|
Mar 15 2010, 10:57 PM
Return to original view | Post
#5
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
did you have active cooling for your ram?for better you need active cooling if you want to pump more vdimm...
|
|
|
Mar 16 2010, 03:31 PM
Return to original view | Post
#6
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
this is normal if you using LinX to stress proc...if you using Prime95 to stress...the temperature load is not high like LinX one...
|
|
|
|
|
|
Mar 16 2010, 07:08 PM
Return to original view | Post
#7
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
QUOTE(general_odin @ Mar 16 2010, 05:14 PM) oh well... i use the latest version of OCCT to stress it... temp aint that good... i used thermolab baram like this one75'c on load, 48'c idle, 35'c ambient and thats only with stock frequency cooled by Hyper 212+ crap man... what cooler did you use ? are your pc in an air conditioned environment ? whats your ambient temp ? btw can anyone confirm with me the max temp threshold of a processor sorry for shooting my question out so rapidly i cant hold back my proc without OC any longer  and no air cond environment Added on March 16, 2010, 7:09 pm QUOTE(salimbest83 @ Mar 16 2010, 06:09 PM) emm.. just put direct blown 80mm fan.. i think it's enough already...as long as got cooling fan...is it enuff? This post has been edited by nidzamputra: Mar 16 2010, 07:09 PM |
|
|
Mar 17 2010, 04:05 PM
Return to original view | Post
#8
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
hyper 212+ is enough bro igf you using performance fan..but your objective is silent setup meanwhile performance fan is too loud..
|
|
|
Mar 18 2010, 08:46 PM
Return to original view | Post
#9
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
QUOTE(GeminiGeek @ Mar 17 2010, 04:35 PM) I manage to get my Q9450 @ 3.2ghz, not sure about my vcore, cos cant seem to set it on my DFI P35 Bloodiron. My vcore doesnt seems to increase when i set my VTT higher. how much VTT you set?According to CPUZ, my vcore jumps to and from 1.16 - 1.20. |
|
|
Mar 19 2010, 11:38 PM
Return to original view | Post
#10
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
what TIM you used bro?maybe using Tuniq TX2 will help a bit...
|
|
|
Mar 21 2010, 06:46 PM
Return to original view | Post
#11
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
CM Nanofusion is ok..but i don't like it because it's hard to apply to proc...hehehehhe...
|
|
|
Mar 23 2010, 08:01 PM
Return to original view | Post
#12
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
QUOTE(general_odin @ Mar 23 2010, 12:37 PM) yeah... its very hard to apply and because of that, i always need to apply alot so that there would be no gaps or empty space between... i not quite sure bro...for me Tuniq TX2 is ok for me...because it's more cheaper & good performance too...Nanofusion i tried once but i dont like it because hard to applied to proc...for AS5 never try it yetAS5 and Tuniq TX2 TX2 win ? from what i read on online reveiws, AS5 > nanofusion but if malaysia review says that Tuniq TX2 is better than AS5 means TX2 > AS5 > Nanofusion ??? Added on March 23, 2010, 8:03 pm QUOTE(GeminiGeek @ Mar 23 2010, 05:44 PM) 1.100v. What is VTT by the way? iinm VTT is voltage termination for processor...and i read (forgot which thread)..if we setting VTT too high will damage your proc..not your vcore...correct me if i'm wrong...This post has been edited by nidzamputra: Mar 23 2010, 08:03 PM |
|
|
Apr 11 2010, 10:54 AM
Return to original view | Post
#13
|
|
Senior Member
3,890 posts Joined: Feb 2007 From: Kuala Lumpur > Kuala Ketil > Kuala Muda
|
arrrggghhhh one of my mushkin pair have problem..need to RMA
 ...now running 2gb only...  ...and i feel the different @kahjye better you take the bios picture & show to us..maybe we can help you...think running 3ghz with stock HSF no problem...it's still can handle |
| Change to: |  0.0345sec
 0.41
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 02:04 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.