Robust Graphics Booster.........................[ auto ]
CPU Clock Ratio.................................[ 8 ]
Fine CPU Clock Ratio............................[ auto ]
CPU Frequency 3.60GHz ----------[ 450x8 ]
******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 450 ]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]

***********DRAM control*******

Performance Enhance.............................[ Standard ]
(G) MCH Frequency Latch.........................[ auto]
Memory Frequency 800...........................[ 900 ](2.00b)
DRAM Timing Selectable..........................[ Manual ]
CAS Latency Time................................[ 5 ]
tRCD............................................[ 4 ]
tRP.............................................[ 4 ]
tRAS............................................[ 11 ]

Load-Line Calibration...........................[ Enabled ]
CPU Vcore [ 1.25000 ]...................[ 1.30625]
CPU Termination [ 1.20 ]...................[ 1.30 ]
CPU PLL [ 1.55 ]...................[ 1.57 ]
CPU Reference [ 0.760 ]...................[ Auto ]
MCH Core [ 1.100 ]...................[ 1.320 ]
MCH Reference [ 0.760 ]...................[ Auto ]
MCH/DRAM Reference[ 0.900 ]...................[ Auto ]
ICH I/O [ 1.500 ]...................[ Auto ]
ICH Core [ 1.100 ]...................[ Auto ]

DRAM Voltage [ 1.800 ]...................[ 2.120 ]
DRAM Termination [ 0.900 ]...................[ Auto ]
Channel A Ref [ 0.900 ]...................[ Auto ]
Channel B Ref [ 0.900 ]...................[ Auto ]


Hi mate,i got my q9400 on gigabyte ep45-ud3p board with these setting 3.60ghz stable, 8gb(4x sticks)kingston hyperX, air cooling with cooler master N620,CM690 casing 7x120mm fans, Prime95 large FFT test 12 hour idle 34c and max load temperature on core were 58c(Realtemp) i felt my room were so hot exist like standing on a kenny rogers roasting chimney , running on windows 7 ultimate x64bit..thinking of ocing it higher but afraid might spoil the board n cpu as i almost running 24/7 perday..well im kinda newbies noob in oc,just wanna know whether are my settings were good enough? shall i make a little more tweak? any better suggestion?

This post has been edited by djandrew: Jan 11 2010, 07:00 PM