cpu vTT in bios start from 1.20 only..
Memset 3.5 not latest 1??

Btw,i found that tis mobo Vnb quite high 1..
When i set it to auto,even no oc,it will raised to 1.34.

okay guys..

my 2nd day got my hand of this Quadie 9550..
no time to test and playing with bios..
just
1)change pci/pcie freq to 37.6 (burn my ex graphic card coz forgot about this setting)
2) set mem divider to 1:1
3) just try fsb 400..than 433 and lastly stop at this 443.9FSB

other setting just leave to auto..

and guess what..
the bios just crank up the voltage to 1.520 volt o load..
and temp as show by OCCT go as high as 85C..
core temp show 76C.

so which one show the actual value for the temp..
pls enlighten me
ps:
yeap..
i know i need another cooler for sure..

i finally got my Q9400 stable @ 3.8ghz.. 4.67v in bios lol crazy >.< (4.44v in cpu-z) on air xD max load temps were 72C (intel burn test) and 66C (prime)

Its normal, my Q9450 is running at 3.2ghz using 1.2vcore has 54, 52, 49,49 on idle. hahaha

argh~~my Q9450 only reach 3.2ghz wit 400x8 fsb~~
i try to go higher only reach 419x8~420x8 the pc no boot==
me using EP43-UD3L and XMS2 2x2gb 800mhz
any1 can tell me?is tat P43 chipset limit edi?

anyone using Q9300?
my cheap mobo limits to 400fsb.. more than that not quite stable..
can't see true proc potential..

so thats the proc i missed out on.

u got a 3ghz bench there???

i'm still play with the ram timing..
hopefully can give some benchmark after stabilize it..

the gpu not affect the benchmark?
will try after install vantage..