Hi all, Im facing a problem. I have a Riger modem which is from TMNET. and i bought an AZtech 802.11b/g wireless broadband router ( WL830LT4 )
I followed the instruction but it cant connect to internet....
I plug direct from Riger modem to my PC...connection OK..
I plug into router and to my PC, no connection detected.
I put all streamyx detail into it...is there any think to do with some other setting?|
i tried changing ADSL2+ to ADSL2 also the same...cant connect..
need help from pros...THX

for ur id did u add the @streamyx behind ur id???

yes i did.
the Tmnet Modem some how doesnt communicate and pass the connection to the router..
do any pro know about this?
I followed the user guide and easy guide from the router..tried more than 2 hours.
It still no working. is it some extra setting needed to be done?

Have you checked the INTERNET LED located at the center? It should be turned ON when adsl modem is successfully connected.

And have you tried both wired & wireless connection?
Since the router got 4 LAN port, try to connect one to your PC.
Then check ipconfig. Even if the router is set to factory setting, it should be able to give you a valid IP.

This post has been edited by kaherudin: Aug 20 2008, 01:21 AM

actually the system and WAN keep blinking while in router mode.
I search LYN since yesterday n found out something to do with bridgings
can anyone detail it for me? cos im not very sure
thx in advance.

may be ur pc NIC got prob. check it.

Should ruled out NIC & Modem problem

This post has been edited by kaherudin: Aug 21 2008, 05:34 PM

Hello there....I wonder if anyone can advise me on this problem that I'm facing. Last Sunday, I registered for the RM66 streamyx package (without modem), and it's self-installation too.

The agent told me to connect the phone line to my router to see if the the DSL light is stable or not. Ok, it's stable. Then I tried to open the following pages:

http://192.168.0.1/
http://192.168.1.1/
http://192.168.1.100/

but they wouldn't open! Why is that? I've tried with two different routers: Aztech Wireless G Router and Prolink11g. Streamyx has already activated my account too. So, what's left to do now is to fix this router problem, right?

Thanks for reading this and I'd really appreciate your advice!

Have you try downloading the manual?

manual.pdf click me

well, since it already stable the line, now the problem is login into the modem setting. Which 192.168.1.1 in the browser. If this can't be open, make sure you already connect 'wiredly' into the router first then try again.

Pity you TS...
Your topic has been 'hijacked'..


This post has been edited by kaherudin: Aug 22 2008, 01:34 AM

abe_mad: Thanks for your help! I'll try.

This post has been edited by Josette: Aug 22 2008, 07:42 AM

192.168.1.254

I also have the same problem you described but the wifi router model is WL830RT4 (not LT4), with streamyx.

I set the streamyx account id and password in modem so can automatically connect to internet.

While in router side, I chose Dynamic IP but router just can't get the data like dns, gateway from modem. (i checked the router at 192.168.1.1 with wire)
I use belkin wifi router and it works like a charm without giving me any hard time.

Tried using PPPoE in router but same problem not showing data in WAN session in 192.168.1.1.

I tried this aztech router with P1 modem (i have p1 service too) and it can receive data from modem, and online without problem. What is wrong with their setting has to do with streamyx setting??

I google around and seem have some users encountered this and wonder if this is a bug.

How you solved it?

This post has been edited by cleoleeps: Mar 14 2010, 08:00 PM

had the same problem bro. But i manage to fix it. 1st hardware reset & software reset ur Riger (make sure the internet LED not lighting up after reset). Then connect ur router & modem. Goto to quick setup & select PPPoe, then key in ur username & p/word(dun forget the streamyx suffix at the back). Then goto network>WAN>choose Connect Automatically. Last step juz reboot ur router & ur good to go

im using wifi aztech bought from tm..my prob is when router is switch off my network name n wep key change to default (aztech)

Hey there, I'm using AZTECH DSL5005EN modem but it has a user limit at my modem router but I don't know how to change the user limit.
I know it is at 192.168.1.1 but I have no idea where should I press to change the user limit.