To all sifus here, my mushkin HP2-8500 cannot run at ddr2 1066 speed, which is the stock speed suggested by mushkin.. currently running at ddr2-1000 with CL5
even i set to any divider to use, will fail to boot.. i even +vdimm to 2.3v which is more than stock suggested but still cannot boot at ddr2 1066..
i have tested with intel platform with asus p5e paired with e6320 using latest bios, maximus formula bios, and rampage formula bios still cannot boot at ddr2 1066..
i also tested at my fren AMD platform with ta770-a2+ paired Athlon x2 4600+, still canot boot at ddr2 1066..
it cannot boot in any sitiution, even with stock i set the dram to ddr2 1066, or i OC the fsb to 400 and set the divider to get ddr2 1066
when i plug the ram, the mobo will detect ddr800 with CL5 rclxub.gif
is it the problem come from the ram? if yes, then can i change it with the shop because of this reason?? since the ram is working.. sad.gif
Anyone experienced this problem before?? anyone having the same ram with me?
plz help notworthy.gif

omg.. then i test 1 by 1 1st.. c how it goes.. thx all for helping

---

Added on July 28, 2008, 12:56 amok.. ady tested 1 by 1, but still cannot boot, then i plug in 2 stick again, it able to boot at 1066, but when i try to orthos, few sec it failed.. and also error from application come out.

This post has been edited by hengmy: Jul 28 2008, 12:58 AM


Attached thumbnail(s)

i bought at july 7, but i use it on my fren board ta770, so i tot i dont fully support it, now i test with my p5e, also same.. also more than 1 week, cant 1 on 1 ady..

never tried before, coz even can boot at 1066 into window, very unstable...

This post has been edited by hengmy: Jul 28 2008, 09:46 AM

problem solved after change for new one
thx all for helping..

---

Added on July 31, 2008, 1:48 amthread closed

This post has been edited by hengmy: Jul 31 2008, 01:48 AM