How bout VR Ultraleggera 16" replica? Look nice ohhh

OZ Ultraleggera

Not VR

lenso is not light...even my SSR Type C replica is lighter than Lenso Samurai range. I'm on 15" and its only 5kg. Lenso samurai is 6.5kg each even for 15"

The lightest rim design irregardless the design is:

Volk Racing CE28 = 3.9kg
SSR Type C =3.9kg
Desmond Regamaster Evo = 3.9kg

yah ... but not a lot ppl like regamaster aka spoon

how much the weight for 15' Volk Racing TE37 japan?
thingking to change it..

Around RM2500-RM2600 2nd hand.

thanx for ur reply..btw, i mean the weight of the rim..

opps my bad,
here the detail: WEIGHT:8.8 lbs = 3.85 kg

haha..no problem bro..
thanx for ur quick answer!~
is it 3.85kg?waa..very lightweight..planning to get it soon!~
but seriously hard to find te37 pcd100..normally got for pcd 114.5..

you really want it? I had found it but the price is more expensive. Try to click
HERE

thanx bro..
actually already browse the thread before..
the bronze te37 was really2 nice..but the offset not suitable for my ride..
if offset is between 38-42 for sure will grab it fast..

[attachmentid=520524]

now this design has became one of my dream rim

PCD100 is always easier to find...114.5 is the one harder as most jap cars use PCD100. a lot of the lighter rims are all on PCD 100.

TE37 is heavier than CE28. The correct weight is around 4kg. Do a google search on the rim weight. You'll be surprised. I did all my research before getting rims.

2.6k for 2nd rims is acceptable but need to check if its repaired or bent.

Thats the thing, I tot the lightest 15 inchers were the famous Desmond Evo Regamaster/ Spoon SW388. It's 3.88kg so thats where they got the name from

are u sure bout the PCD?bcos already ask the tyre shop as mostly japan rim got pcd114.5..and already did some research from other forums, mostly pcd100 japan rim will be overprice than the pcd114.5 rim eventhough it is the same design,same brand,same series..
but, do correct me if i m wrong..


i thought that too.. lol

eerr.....its PCD 114.3....got PCD114.5 meh??


but generally referred to as just "PCD 114"

anyway...1 thing i noticed is that for jap cars...pcd100 is more towards general cars....their performance cars are mostly 114.3...especially in thhe case of hondas.


n most old school rims...those deep dish types are 114.3...almost impossible to find 100.

This post has been edited by mADmAN: Apr 7 2009, 12:33 AM

oopss..sorry for that misleading..haha..the 'point2' thing make me confuse whether it is 114.3 or 114.5..
yup..thats what i thought too..mostly performance rim will not come in pcd100..if it is, it might be a higher price..

To me:

5 holes PCD114.3 rims more expensive den PCD100.

4 holes PCD114.3 rims cheaper den PCD100.

i m refer to the 4holes one..as my car only got 4 holes..