Normally 8 holes PCD is 100/114.3, which means can accept both PCD. So if yours 4 holes, you also can use 8 holes rim.

Now only left the offset, if offset too little, the rim and tyre might too out and could hit fender.

My current Rim is XXR brand 17", this brand got hear before? is it a good brand?

Thinking to switch smaller rim cz i will downgrade my adjustable absorber. (use normal/sport absorber 17" will hit fender)

So i hunting for budget / value rim.
After research i found few brand which heard is good n value,
Lenso (Thailand), Advanti (from USA i guess), Enkei Taiwan.

From this 3, thinking to get 16, as i think the price diff not over 200.
Which brand is better in term of weight n price? design i can filter later

Never heard the brand before, most probably is China made rim, like 99% rim out there.

Lenso and Advanti don't think there is imitation, others mostly just imitation. For other branded rim, original cost 3-4 times more expensive than imitation, but I also saw before a guy pay 4K for his supposedly original Japan rim, but actually is just imitation which normally people sell less than 1K. Unless you super trained to see original vs imitation, I highly advise against buying rim that have imitation in here.

Weight and price? Go to the shop and weight the rim, each design rim weight is different. Price also each shop selling is different, it's not fixed price like KFC.

lenso and advanti price range around how much? 600-800 15inch can get? pcd114
Like not much can find..

This post has been edited by eddie2020: Jun 26 2015, 12:15 AM

Not sure the price, maybe around 800-1k.
Hard to find shop carrying these brands as most shops just go for China rims because it is much cheaper.

just find the real problem. The tyre for my saga is 55, so sagat...
Ok, changed a new one. Alas, correct me if im wrong, the lifespan of tyre, either new or used only 4 years right?

Can be a bit more actually but not much longer. You need to start paying careful attention to the sidewall if got signs of cracking, especially since we're driving in hot & humid condition. Coz I've used tires up to about 5yrs before and when I changed it, the sidewall rubber suddenly crumbles into pieces when they're taken off/pressed by the machine. It was quite an eye opener for me because just a few weeks earlier I still took that tires to about 180-200kph!

Such a lucky guy, you are.

Yeah, I was shocked and relieved at the same time back then. The problem was, we never see the inner side wall, always only the outer side that we clean and put tire polisher. All that time the inner side become brittle and developed cracks which all crumbled during uninstalling process.

Learn something new today.

hi all, how much is decent rim cost for 18x7.5J, 5x114 ET45. is rm2-2.2k suffice w/o tires. fitting with 235/50 tires. (alternatively i might consider for 17x7J 5x114 ET33 rims with 215/60 tires) thanks

I think possible to get with such budget for new Taiwan or Thailand made rims such as Advanti, Enkei Tuning, or Lenso. Or do you want to get used? If used, might get cheaper Japanese rims.

6uest,is those taiwan and thai rim is durable? i am fitting to an alphard which is family car and the car is quite heavy. usually decent rim would cost how much? if the price is to much diff, then i will just settle for used 18" Alphard NFL rims.

As long as original Advanti/Enkei Tuning/Lenso, then it's fine. Don't buy replica/copy rims or those China made rims. You can try contact Nestum, he is selling many of those brands and he's posted his ads in the lowyat automotive garage section here. Mudah.my also has many ads for those brands.

Hi guys.. for used rims, is there any special precaution i need to be aware of other than the basic cracks or dent?

i dun really mind if it is original or replica, but as long as it is durable (able to withstand small bumps and not bent) and not too freakin heavy, i'm good with it.

Thanks.

Hi guys, any OEM rims are 16" 4x100 6.5/7jj?

I am using tyre 205/55/16.

Ford Fiesta (Previous facelift) and Honda City are 6jj only.

The authenticity of the wheel (if you are buying used rim at high price). Dont want to get cheat buying fake wheels which claimed as "original".

Other than that, minor thing such condition of the wheel (paint chip etc). Also, check for rust and rigidity. If the wheels badly rust, certainly you may consider to re-condition it. This apply to those rare wheels such MK, Meister, Longchamp SR-4, Hoshino, etc.

Any recommended shops to buy sport rim? Thinking of changing the sport rim of Nissan X Trail 2015 to sporty ones. Thanks!

any suggestion for cheapest forged rims in 17 inch?

Work Emotion CR Kai any good?