Yeap. I found out, one of my calipers, one piston was jammed and misaligned, another caliper, some screw holes needed retreading.

ok..will skim & monitor how is it

where ?? intro me!!

bosch brand? or OEM?

good info. may i know how did you find out that you face such problem? i actually face some problem on my rear disc, recently installed EK4 rear disc on my EK, already skim the disc and changed new brake pad. but somehow, i dont feel the grip and when i look at the disc after drving around, the disc seems not evenly grip from the pad. i can see the rust on the disc.

may i know where did you service your caliper...i suspect something's wrong with the caliper.


note: thread owner, sorry to hijack your thread... TQ hehe

any workshop can carry caliper servicing.... done my caliper at gombak

i skim my disc at bukit mertajam, prai.

how much to service caliper?

bosch one...not OEM...but still cheap ma...piff

diy service la.... easy nia...

well, actually when i bought the rear disc, the seller oredi service the caliper...but service to what extent....no idea la.
yeap, will go to workshop and ask then. hope it solve the probs.

cant afford to spend more money since petrol so blardy expensive.

u r sifo mah... macam mana mau compare wif us so noobie 1...

i also dunno one leh... no reference to refer to... no one to ask...
the other day my mirage calipers jammed... no choice have to remove it myself and check whats the problem.... buta2 in the end manage to clean up everything and fixed it back properly... now running vr nicely with no leaks...

i think flush all the brake oil is the servicing.

if it's that easy then mechanic no need cari makan lor.. haha!

caliper servicing needs lot more other skill lar.

I personally can't do it.

Only YC (the FD3S owner) can do it here in AutoGen.

service kit for my caliper

RM55

labour

RM30

brake oil dot5.1

RM20

u do the math laaaaa.....

p/s: honda civic s5a

noler.... thats brake fluid flushing only...

servicing calipers include removing the whole caliper unit... taking apart the piston off the calipers... cleaning up all the dust and dirt inside and replacing all the rubber seals... fit back everything... top up the brake fluid and do brake bleeding...

sounds like overhaul the caliper to me.
hehe............
i check if my mechanic know how to service the caliper or not.
my caliper sudah 10yrs old lor. its time to overhaul it.

yeap... considered as overhaul caliper...

Usually it's advisable to get our car's brake calipers service every 25,000km. I only service my braking system whenever i replaced new sets of brake pads with my mechanic.

i never even service my brake before, changed brakes pads for like?the 3rd or 4th time liaw...oem pads really finish very fast..can't even last me 2 years..
important ka to service? i only changed my servo before only, not the calipers

brake calipers dont need to service often la... unless when it starts to get jammed den only take for service...

normal service like brake fluid flushing, brake bleeding, change brake pads and so on must do lor....

is workshop or sparepart shop? open at sat / sun? can pm me the shop name and phone number if u have it?
thanks!