Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 CLOSED

views
     
Fearless
post Sep 9 2008, 06:36 PM

Casual
***
Junior Member
390 posts

Joined: Mar 2005


QUOTE(Moogle Stiltzkin @ Sep 8 2008, 12:12 AM)
I find that hard to believe  shakehead.gif

Anyway price on site says rm3000 but when i asked they said it was Rm 2.4 K

Mine is arriving tomorrow. If you check the previous pages for this thread i posted a lot of information already  nod.gif
*
I got Philips 24" for RM1450 from Singapore Sim Lim. Its resolution is 1920 X 1200 and 60 Hz rate. The only problem is the unit I purchased come with not working speakers, I am lazy to send back for repair because I have never used them. Another issue is user has to get a third-party software to support screen rotate. Irotate software from Taiwan is free and work perfectly with Philips monitor and G-Force graphics card.

What is so special for HP 24" LCD minitor for asking such a steep price?

This post has been edited by Fearless: Sep 9 2008, 06:40 PM
Fearless
post Sep 9 2008, 06:53 PM

Casual
***
Junior Member
390 posts

Joined: Mar 2005


QUOTE(dmm9394 @ Sep 8 2008, 02:12 PM)
heya all,

after taking a looking at my 2232GW, my dad's thinking of getting a 22 inch monitor for himself too as his eyes cant really take the small icons on his 15 inch monitor anymore.

thing is his computer is a really old Dell (like 6 years+). I hadnt been able to bring my monitor over to see if it works with his PC, but i've got a gut feeling that his old integrated graphics might not take the native resolution of a 22 inch (correct me if i'm wrong please).

if yes, then what's the bare minimum graphics card that would support a 1680x1050 resolution? I might end up having to build a new CPU for him, which only would be to use simple Microsoft Office tools and for surfing the internet.

thanks and hope for your feedback smile.gif
*
Don't falling into trap of believing wide LCD is good for viewing. To have sharp and clear font, LCD has to be set to its native resolution, higher resolution meaning the font size is smaller.

I am telling you this because I have 15" and 24" LCD monitors. For bigger font display for old man, I suggest you to buy a low native resolution LCD, 17" shall be ok.

Setting to low resolution in a wide high native resolution LCD to have bigger font is a bad idea, the font display is NOT sharp and clear.


Added on September 9, 2008, 6:58 pmI have seen many home users do not use ClearType font and native resolution settings for their LCD monitor. The font display is horrible poor.


Added on September 9, 2008, 7:06 pm
QUOTE(xchoit @ Sep 9 2008, 06:47 PM)
diff type of panel i guess biggrin.gif
*
Most likely LCD panel for HP, Dell and Philips are from same sources. blink.gif

This post has been edited by Fearless: Sep 9 2008, 07:06 PM
Fearless
post Sep 12 2008, 04:03 AM

Casual
***
Junior Member
390 posts

Joined: Mar 2005


QUOTE(kaiserreich @ Sep 10 2008, 07:21 PM)
I agree and disagree for some points.

5:4 17" and 19" has the same resolution and the 19" would have bigger font size, in fact, the 19" 5:4 monitors has the biggest among LCD monitors, unless you'd want to use a LCD TV as a monitor.
*
My point is getting the lowest resolution in widest monitor in the market. If there is 800 X 600 30" monitor, go grasp it for old man.

My new 24" monitor is having much smaller font than my 15" monitor which is more difficult to read news. Have to bear for trade-off between font size and movie size.


Added on September 12, 2008, 4:14 am
QUOTE(Matrix @ Sep 11 2008, 07:26 PM)
Can anyone tell me how to clone the 2nd monitor to be identical to the 1st? Is it must be same resolution? I just want to clone the output to a 2nd monitor(LD TV actually) instead of extending my desktop to it.
*
Get a splitting cable to connect two monitors to your PC.

Some old monitors cannot support higher 1920X1200 resolution. Originally I was planning to use two monitors in different locations. Small one for reading news and email, and big one is solely for movie, but my old monitor is incapable to support high resolution. It's too troublesome to readjust resolution back and forth, so I decided to give my old monitor to my nephew.

This post has been edited by Fearless: Sep 12 2008, 04:42 AM
Fearless
post Sep 12 2008, 04:33 AM

Casual
***
Junior Member
390 posts

Joined: Mar 2005


QUOTE(juniortit@n @ Sep 10 2008, 06:54 PM)
wan to buy a 19' LCD wide...which LCD can recommended???

currently consider Dell brand...any brand are also welcome..

50% for movie n 50% for gaming...

thx in advance..
*
Test it on-site before bring your new monitor home.

I was so confident to assume Philips monitor shall work as intended, but I was wrong. The built-in speakers are dead. Send it back for repair is never a pleasant experience.

My advice is DO NOT buy Philips monitor for two reasons, first is shipping defective product to consumer showing that they have lousy quality control and second is you never get reply from Philips online customer support except confirmation email generated by server.

Philips monitor is no longer under Philips groups, the division shall be under a China company by now.

For peace of mind and good customer support, Dell is number one service compnay in the market.

I will not buy any HP product no matter how good and how cheap their products, their online customer service is damned suck as Philips.
Fearless
post Sep 13 2008, 04:01 AM

Casual
***
Junior Member
390 posts

Joined: Mar 2005


QUOTE(Eoma @ Sep 12 2008, 11:40 AM)
Rather than lower the resolution for "bigger" text, why not just increase the font DPI. It makes no sense to go low resolution. Have larger high resolution fonts.
*
Many websites are hardcoding to 10 dpi, increase font DPI setting does not increase actual font size.


Added on September 13, 2008, 4:12 am
QUOTE(Matrix @ Sep 12 2008, 09:46 AM)
Thanks for the tip. I've an ATI 4850 and output to a 22" Benq LCD via DVI and a SHARP LCD TV via HDMI.

I'm using the Sharp to watch movies. Currently it's very troublesome as i need to drag the apps over to the Sharp desktop, but since it's far away( about 12 feet or more), i can't see what i'm doing with the keyboard and mouse on that screen. doh.gif

I read that you can actually clone the monitor via software, but only saw it for Nvida cards and XP. VISTA seems to have do away with the cloning features.

Now the problem...since i need HDMI for my Shapr and DVI for my Benq...how do i split???
*
I think you go for one interface if possible, HDMI or DVI only. Cloning two monitors shall less complicated than one monitor and one TV in your case.

This post has been edited by Fearless: Sep 13 2008, 04:14 AM
Fearless
post Sep 22 2008, 04:36 AM

Casual
***
Junior Member
390 posts

Joined: Mar 2005


QUOTE(zzzz52 @ Sep 20 2008, 11:25 PM)
Normally the best setting is the native resolution, for 19' widescreen is 1440x900. Because if you set to a lower resolution, the image is not sharp anymore as the LCD has to scale down to the lower resolution.

I think most of us will stick to the native resolution as it gives the best image quality.

The font is slightly smaller, but you will get use to it.
*
To have big font size for surfing, I suggest u get a low end 32" TV LCD as your monitor. U can get it at around RM2000 for Philips, Samsung, etc.

Indeed I overlooked this option, I very regret for having 24" 1900X1200 Philips monitor, the font size is too small for comfortable reading.

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0176sec    0.63    7 queries    GZIP Disabled
Time is now: 7th December 2025 - 12:39 AM