Attached thumbnail(s)
Overclocking E7XXX Series
Overclocking E7XXX Series
|
|
Jul 21 2009, 11:29 AM
Return to original view | Post
#1
|
![]() ![]()
Junior Member
85 posts Joined: Jan 2008 From: catcity, near the Grand Line |
|
|
|
Jul 21 2009, 06:10 PM
Return to original view | Post
#2
|
![]() ![]()
Junior Member
85 posts Joined: Jan 2008 From: catcity, near the Grand Line |
QUOTE(farscope @ Jul 21 2009, 01:17 PM) yeap, in ac room, ambient temperature is about 24 degrees..im using OCZ vanquisher cpu cooler mah, its really cool, max load only about 51 degrees on ac also Added on July 21, 2009, 6:12 pm QUOTE(Alienwarez @ Jul 21 2009, 03:59 PM) hehe, i know its obsolete already, still keeping it till next time when i upgradeits still a good mobo for OC provided you update the bios to get better control This post has been edited by vicdd: Jul 21 2009, 06:12 PM |
|
|
Jul 22 2009, 12:03 AM
Return to original view | Post
#3
|
![]() ![]()
Junior Member
85 posts Joined: Jan 2008 From: catcity, near the Grand Line |
QUOTE(twinkles @ Jul 21 2009, 07:16 PM) Are you using 1 [ special Air cooling just cool your CPU ? ] ? Does it work ? Cooling down the temperature. depends on what brand la, cap ayam brand will not get you anywhere, (rather just keep using stock cooler) where as a good one really cools down your cpu overclocked if you are planning to overclock, aftermarket cooler is the best bet, you dont want your cpu to fry of rite? Added on July 22, 2009, 12:06 am QUOTE(farscope @ Jul 21 2009, 06:30 PM) no wonder.. cz even with very good coolers, will hardly reach 34 on idle without air cond.. cz we need a minimum temperature difference in order to have a heat transfer (study too much heat exchanging.. haha, yeap, in Malaysia, ambient temp is 39-40 degrees, impossible for the cpu to be 34 degrees in idle mode lo hehewith the ambient temperature at malaysia, hardly reach 34 unless u stay at genting or cameron lo.. tat's y i suspect u use ac.. anyway, good OC u hav there.. im still trying to push to 3.5 ghz with stock voltage, but still no avail..now trying to adjust lower multiplier with higher bus speed will keep you guys updated This post has been edited by vicdd: Jul 22 2009, 12:06 AM |
| Change to: | 0.0227sec
0.51
7 queries
GZIP Disabled
Time is now: 20th December 2025 - 05:48 AM |