i'm gonna test the px100 on saturday... i'll let you know whether i'll consider the hd201 or not by that time.

OK. Hear from you soon.

i want to ask,do Sennheiser MX 560 compatible with IPOD NANO 2nd generation?

It works if you want something looks better, you may consider this.
RM117

---

Added on May 10, 2009, 9:18 amSold 1 unit HD 201 to Shezzar.
Thank you.

This post has been edited by DAViS: May 10 2009, 09:18 AM

But I want to make sure MX560 can works with nano 2nd generation or not..I want to give it as present..

This post has been edited by alexooi17: May 10 2009, 11:12 AM

what's so hard to check compatibility? just make sure the earphone/headphone uses 3.5 mm jack.. sure fit.

you go to 5 ringgit store buy earphone oso will work as long as its 3.5 mm.

sorry for my noob question,i dont own a ipod so i dont know.sorry yah,will reply you later.

ipod is using 3.5 mm jack also.. because that is the most common headphone jack in the world.. about 90% of earphone jack is 3.5 mm.. except for most sony ericsson phones because they think they are more "special"

but then.you can check apple website,the one inear earphone also 3.5mm jack but it writes there not compatible with nano 2nd generation.

Ipod nano lanyard earphone

Apple in ear

Apple earphone with remote n mic


you see all three and tell me what makes only one type can compatible with nano 2nd generation.

The solution is the Philips model. Sennheiser doesn't has it if my memory serve me right.

arghh,the sennheiser design is too nice to be rejected..

Philips got certain range of product got paid royalty to iPod to use their design thus they can carry iPod/Mac original style logo not like others only mention iPod in font.

any good recommendation ipod nano 2nd generation compatible ear phone ?ranging Rm 100-150?

Only Philips that model, Sennheiser & AKG does not has them.

i'm assuming that your friend has an ipod nano 2G.

for both the in-ear earphone and earphone with mic and remote, ONLY the MIC AND REMOTE will not work with other ipod nano generation besides 4th gen ipod nano. this is due to hardware and firmware limitations in the older ipod nanos.. however, the audio WILL still work.

the lanyard already stated that it will work for 2nd gen nano. so it's not a problem if you want to buy this for ur friend.

the mic and remote is a new function introduced by apple recently. it can only be used for the newest ipod nano 4G/ipod touch 2G/classic/ shuffle 3rd gen. therefore, if you still insist to buy this earphone/in-ear, you can still listen music from it.. just that you cant use those mic/remote functions.

for sennheisser earphones, i'm still not sure if they already release earphones that supports the mic and remote function yet.. but if you just want basic function like listen music, almost all of the sennheiser earphone will still work regardless of which generation as long as it writes 3.5 mm jack

---

Added on May 10, 2009, 10:17 pmanother clarification, which type of earphone you wanna buy actually? isit the one with lanyard?

This post has been edited by vetkin_gray: May 10 2009, 10:17 PM

my friend use nano 2nd generation.so that means,i can use the sennheiser mx560 on the ipod to listen music right?am i correct ?

yes you are correct.

http://www.sennheiserusa.com/newsite/produ...?transid=500954

check the connector type... 3.5mm gold plug

ok,thanks for the help.

Sennheiser Communications added in.
http://ncane.com/ypp0

---

Added on May 13, 2009, 11:48 amSold 1 unit HD 201 to Shezzar.
Thank you.

This post has been edited by DAViS: May 13 2009, 11:48 AM

Hi. You know at Lelong someone's selling way cheaper Seinnheser than you. And I read online that there are many counterfeit ones that almost alike in looks and performance as the genuine. And they say only those who own genuine can tell apart the fake ones. So you got any tips for us to find out who is selling genuine?

I am very interested in the CX400, and you official prices are steep for me lah.