AMD� Socket-AM2/AM2+ Overclocking thread (V8), Phenom Phenom Phenom
|
|
 Jul 11 2008, 11:44 AM
Return to original view | Post
#181
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
QUOTE(AMDAthlon @ Jul 11 2008, 11:06 AM) Usually if not successful it will reset CMOS right?But mine proceed but it cannot boot windows.So you know why? nope, can't boot into windows means that excessive oc is done. i can boot my quaddy @ 2703MHz but after post (showin those irq thingy) then just blank (monitor is on but nothing displayed).   |
|
|
|
|
|
Jul 13 2008, 02:00 PM
Return to original view | Post
#182
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(joe_star @ Jul 12 2008, 11:35 PM) yea 2nd hand, im not sure wats the 1st hand price now but the former owner paid RM290 for it. I know.......its vy weird, will try to put up a screenie. I ran superpi 32M stable at 3ghz on stock volts and it passed but prime immediately fails. more juice for d chip needed i guess... QUOTE(chungbet87 @ Jul 13 2008, 12:09 AM) for AMD abit AX78 and abit NF8200 chipset is it a good mobo?? ax78 will hinder ya oc if ur on quad (sb600), nforce chipsets are known for their "hotness". if not cf needed, i wud say nf8200 worth a try if u can live w/ high temp @ nb. 770 aint so cool either fyi.  This post has been edited by ah_khoo: Jul 13 2008, 02:00 PM |
|
|
Jul 13 2008, 09:00 PM
Return to original view | Post
#183
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sarahlah @ Jul 13 2008, 03:07 PM) what do u mean by hinder ur oc ? meanings that u can't oc too far w/ d board, but that applied to quaddies only. x2 have no problem to oc on sb600 boards thou. |
|
|
Jul 14 2008, 05:31 PM
Return to original view | Post
#184
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
nvidia used to have champion chipset for amd oc, but after d gud old nf4, they are nowhere to be seen...
 too bad i'm on cf (ati fanboy am  ), else i dun mind to try an nforce chipset board since they dun have this $+upid sb600 problem for quaddies (i guess)...  ot: let's spam until we reach page 110... muahahahha.... |
|
|
Jul 14 2008, 08:32 PM
Return to original view | Post
#185
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cyloh @ Jul 14 2008, 08:22 PM) mr ah khoo... still cannot hit 2.6ghz yet? nope mate, gave up ledi. it could be diff if i own a k9a2 plat... 770 ain't cut it for quaddies oc, or i'm sux... |
|
|
Jul 14 2008, 10:12 PM
Return to original view | Post
#186
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(hengmy @ Jul 14 2008, 09:58 PM) just get a 4600+ f3 from lowyat today.. gonna oc kaw kaw most f3 have no problem hittin 3.0GHz w/ rather low voltage like 1.2x~1.3xV (even a crappier like i own b4 btw, can f3 user share about the vcore to do 3.0 .to 3.5ghz stable?? need references.. thx  ), but u need a special batch to get near to 3.4GHz or above with acceptable vcore (1.35v & above). |
|
|
|
|
|
Jul 14 2008, 10:39 PM
Return to original view | Post
#187
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(hengmy @ Jul 14 2008, 10:23 PM) oic. first time play with F3, my first result.. nice oc there mate...  try to burn it longer, hopefully u can brin d voltage down to around 1.4xV... |
|
|
Jul 15 2008, 08:59 AM
Return to original view | Post
#188
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sarahlah @ Jul 15 2008, 12:53 AM) @hengmy i'm more concerned with d batch no if i'm interested. how much u bought those F3 ? QUOTE(xixo_12 @ Jul 15 2008, 08:17 AM) poison ko tak "back to skool" ke bro...  @alive88 happy schooling back... |
|
|
Jul 15 2008, 07:53 PM
Return to original view | Post
#189
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 15 2008, 09:32 AM) wow now even easy to get passed 3.4ghz... i wouldn't go for any 9xxx'e' chip if i were u bro, they are not meant for oc, more on preservin our mother earth. any 9350e or 9850 @ lyp? boring de with my proc.. QUOTE(cyloh @ Jul 15 2008, 11:04 AM) Or can PM me for my phenom definately one of d best board for quaddies besides asus 790fx & dfi ut/dk... MSI K9A2 Platinum sounds like a good match for phenoms for now... QUOTE(8tvt @ Jul 15 2008, 02:38 PM) nope trying to search info on it.. as mentioned, forget bout oc if ur gettin yaself an 'e' chip. i reckon d price of 9950be now is very near to 9850be, so d best bet is grab those 2nd 9850be if happened u can find one. 9550 worth a try thou imo considerin it's price... why not see any X2 4050e n 4850e? that one 45W and G2.. if can oc well then nice.. QUOTE(AMDAthlon @ Jul 15 2008, 07:03 PM) No i suggest you buy only when Deneb release.Seriously.If u want go also,get 9150e.IINM on some review it can hit 3.0 with some VCore. i have yet to see few sites statin that 9150e are gud clocker, 9950be doin quite well atm but d wattage & d $$$ are d reason stoppin me to grab 'em. |
|
|
Jul 15 2008, 08:09 PM
Return to original view | Post
#190
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(AMDAthlon @ Jul 15 2008, 07:55 PM) Becos that i suggest all wait Deneb release.Btw 9850 BE 1.48V at 3.7Ghz(WC) good? i dun think that's prime stable. u aint wanna run a nuke reactor in ya room (if happened ya rig is in ya room). @ 1.48v, u can use d wc as water heater ledi... average prime stable (all cores) clock for 9850be is around 2.9~3.0GHz, that's what i can observed in xs w/ most of them on k9a2 plat.  other than d temp of d chip, one need to take k of pwm temp. it gets alot hotter if ur on quaddies (even a 95w like mine) compared to x2.  |
|
|
Jul 15 2008, 09:32 PM
Return to original view | Post
#191
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cyloh @ Jul 15 2008, 09:27 PM) This is as far as I can push my phenom for now. nice one there mate considerin we're on 770, 1MHz more for d htt frequency... go go go... » Click to show Spoiler - click again to hide... « can't find a cheapo k9a2 plat nowadays, else this will be d 1st time i eat my own words (that i won't be usin any msi board)... huntin d 9850be in garage sales now? edited: btw, any diff with d ganged/unganged mode for d ram?  This post has been edited by ah_khoo: Jul 15 2008, 09:36 PM |
|
|
Jul 15 2008, 09:43 PM
Return to original view | Post
#192
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cyloh @ Jul 15 2008, 09:35 PM) Haha same goes here, on the lookout for a cheap msi k9a2. yup, that's what i'm thinkin too... d major parts needed for oc are chip & board. since there're some gud oc examples of b2, so d problem of us might be board related. Yeah hunting for the BE but not in a rush cause you might never know if SB750 mobo will turn our B2's to something good did u add any other voltages (apart from vcore) in order to be prime stable?  |
|
|
Jul 16 2008, 07:52 AM
Return to original view | Post
#193
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cyloh @ Jul 15 2008, 10:44 PM) I guess we have to take a passive stance and see how this "platform" story plays out for us. d wait is over mate... Owh, increased memory to 2v from 1.95v ( not sure if that is really needed.. i'm noob in memory ) and nothing else besides vcore to go with it. here's d new 790fx + sb750 board that some of us have been waitin for...  more @ HERE This post has been edited by ah_khoo: Jul 16 2008, 07:53 AM |
|
|
|
|
|
Jul 16 2008, 09:51 AM
Return to original view | Post
#194
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Jul 16 2008, 08:17 AM) not over yet until sum1 bring to malaysia market give it another month bro, then u'll see... |
|
|
Jul 16 2008, 06:44 PM
Return to original view | Post
#195
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dblooi @ Jul 16 2008, 05:31 PM) i would say, give it another few days woot... ur back bro... plannin w/ coolice to do some record breakin stuff ah?  stay tune   9950be + this 790fx w/ sb750 board? |
|
|
Jul 16 2008, 09:30 PM
Return to original view | Post
#196
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dblooi @ Jul 16 2008, 08:13 PM) i only have X2 3800+ can u bulk d board bro? kinda interested if d price is affordable... unless someone willing to lend me a phenom B3 proc post this first, for all the amd lovers  [attachmentid=530247] sb750 better not fail me this time...  QUOTE(AMDAthlon @ Jul 16 2008, 08:41 PM) Wah..how i wish there is Phenom B4 it's a gx as there is onboard gpu... OMG thats Biostar 790GX/FX? |
|
|
Jul 16 2008, 09:38 PM
Return to original view | Post
#197
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(rosihan @ Jul 16 2008, 09:33 PM) wats new on sb750? if accordin to expectation, better overclockability... sb600 is d reason why freeze happened when htt is high IIRC... 6SATA controller? |
|
|
Jul 17 2008, 08:57 AM
Return to original view | Post
#198
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cyloh @ Jul 16 2008, 11:40 PM) Wallet burning season arriving.... this mobo is just tempting. yup, it would be a dream rig w/ d specs like that... 4850 cf would be enough imo... brin on crysis... 9950BE + 790GX + CF 4870 all on water cooling.... a DAAMIT dream. btw, u should consider uppin other voltages as those in xs manage to break 2.6GHz barrier w/ their k9a2 plat mate... |
|
|
Jul 17 2008, 10:02 AM
Return to original view | Post
#199
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 17 2008, 09:44 AM) @cyloh mine @ 2.507GHz score a 29xx cpu mark in 06. can tell me what u getting on 3dm06 cpu mark @ 2.6ghz? what the voltage? |
|
|
Jul 17 2008, 10:41 AM
Return to original view | Post
#200
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 17 2008, 10:18 AM) really? i thought with that speed can get 3k.. it depends on latency of ram also i think.  if 9150e/9350e can be clocked like 9950 sure nice.. i found these new proc got some performance boost on same clock old b2/b3.. atleast if oc can get better result.. as for hopin d 'e' chip to do like 9950, that's a big dream bro. imo, no way on earth they'll go near 9850be, let alone 9950be. i wud be happy if a 9150e can reach 2.3~2.5GHz. remember that amd comes out w/ be becoz most of their chip can do high htt, 9150e & 9350e only come w/ 9x & 10x multi respectively, so it's really hard for them to reach high clock since they don't come w/ unlocked multi. This post has been edited by ah_khoo: Jul 17 2008, 10:42 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0406sec
 0.23
 7 queries
 GZIP Disabled
Time is now: 6th December 2025 - 04:46 AM |
Quote