oh, finally perodua kenari hv own thread adi... reporting in '06 kenari ezi mocha sliver AT...

hmm, impossible la.. even if really sth exist, without modify the current rear seat, i guess only small baby can b fitted in that place...

ok, wat im using:-
- ultra racing front 4point tower bar
- black hella twin horn
- pivot raizin VS-1
- rear KYB Excel-G Shock Absorber (terpaksalah, u guys know hw gd is rear absorber la)
- profile 60 for front tires, more comfort, can protect rims some more (but rear stil stock, profile 55)
- NGK G-POWER platinum spark plug
- Cooler Master Ultra Aurora Blue CCFL (for interior, front)

edit: oh ya, my plan for coming up half yr:-
- K&N drop-in air filter
- H3 HID for the fog light, either 3000K or 4300K (but talking bout jpj )
- another 2 pair of CCFL for rear seat n rear compartment
- 6mm spacer for rear wheel (adi bought, no time to install)
- I.C.E?!
i tink thats all la...

This post has been edited by jaesern: Apr 24 2008, 01:23 PM

- 1stly, pm-ed u bout the price n location for UR 4point...
- pivot raizin got diff la of course, but compare to other, i dunno lo... tis is my 1st n only VS...
- KYB Excel-G, nt really expensive la, rm50+ per side, so total less then rm120... n i install it myself, quite easy...
- CCFL, normally is the name for comp's casing neon la... ppl who knows car cal it neon...
- "centre cone"?! thats is for rims thingy if u change rims, if i nt mistaken, tis spacer wil b slot between the brake drum n rims... so each side of rear wheels wil hv 6mm, n in total of 12mm wider between left n right wheels... hence, better looking (tis is my purpose of putting the spacer) n better stability? im nt pretty sure bout the stability, due to i havent install it...

ok, talk bout ur part...
- hw mch is the custom uncle spring for front n rear, pm me pls... quite 'dulan' adi cuz of the bouncing...

i cant imagine if kenari slam-on a big big GT wing lo... oh ya, pm-ed u bout the price n location for UR 4point adi...

if FC nt mch diff then is gd news for me, cuz my full tank can go nearly 300km only if FC dun make diff n power can increase a bit, it's gd news...

rm160 for CUS, wit installation?! if the spring nt lowered, then i ned to consider it again... currently im looking for spring that is lowered, wit comfort, it means nt bumpy...

im nt very sure type of sound proof my fren got for me, but is kinda cheap, n i confirmed wit him again 2day, stock stil available i stil havent done any research on sound proof, so basically i dun even know the type of sound proof u mention looks lik

ur apm performax is refer to shock absorber it's?! i changed rear recently n front stil ok, so dun really ned at the moment...


ur bonet board is refer to the board to cover the rear compartment it's?! i did mine recently, is actually those screw-in type also as u mention, but i request nt to screw the board into the adapter, so i can detach the board whenever i ned... but there is a bad thing if u dun screw (lik wat happen to me nw), wen ur car pass-by bumpy road, the board is 'jumping' also

nt bouncy?! im looking for lowered n nt bumpy, in another word, comfort maintain la... cuz i heard from others that performax's spring very bumpy... so i dunno their product for kenari...

ya lo, macam dying adi...
recently tis few week i added 6mm spacer n another pair of CCFL aka neon into my trunk... i ned another pair for rear seat soon... gonna post up photo if i hv time to capture...
i managed to touch 150km/h, it means, over 140km/h la... seriously felt very dangerous nw... hehe... some more wit stock suspension lagi...

hmm, mine even wit gd alignment n high-speed balancing i felt scary also... of course la it's cuz of stock suspension... stock doesnt meant for high speed...
oh ya guys, im planning to lowered my kenari, dun ask me to potong spring la... any lowered spring out there which is comfort + lowered?! my budget is rm400 without installation... if the best is u guys is using it...

kev da man, apm performax it's comfort or very bumpy?! cuz if a bumpy 1 my mum sure complain to me...

juz sliiiiightly?! nxt time if any gathering i got to look for u to hv a ride...
anyway, seriously if i tink again, i dun really mind if juz slightly bumpy, cuz my parent which is driving my kenari adi been 'trained' (actually scolded by me la ) nt to go over road bump too fast n avoid holes if there is... so its lik doesnt matter if i get a slightly bumpy 1...


i heard from my fren about prokit's spring, 2nd hard needs rm400+ also, i was shock bout the price...


yea, my kenari goes over road bump at 0kmh wit STOCK SUSPENSION... wat to do, suspension no warranty, n it's nt cheap... plus i hv plenty of time...

yea underseat woofer... but normally it's so expensive based on wat i know... do u fully utilize ur rear compartment, somehow until u cant c ur rear windscreen?! if nt, get a speaker board n 6X9 speaker... i adi got the board, but speaker nt yet

sure, enjoy the photo...





it's removable, actually it should b screwed, but bcuz of sometimes i ned to deliver/send/fetch some huge object, so i dun screw it on to the adapter, so juz unfold the rear seat then it can b remove... advantage of tis board is ppl from outside cant c wat u put inside the trunk...
last two photo i mounted a pair of CCFL, aka neon on to the underneath of the board, it's damn bright at dark area n it's removable also wen the board ned to b remove, juz plug n play stuff...

This post has been edited by jaesern: Jun 1 2008, 04:13 PM

i got it from brother puchong, yea, brother... terpaksa la, cuz it's really cheap compare to over accs. shop... i remember i was keep farking them from im about to buy to middle of installation...

the story is lik tis, i saw it selling cheap wen i hang around there, they quote me rm80 wit installation, den after consideration bout 2-3weeks... i decide to buy, den they quote me for rm100, rm20 diff, so fark them for 1st time, i juz bising2 around la, finally they sell me at rm80 wit installation, ok den im happy bout it...
wen comes to installation, they r bz around, i dun mind, wen it's my turn, my park my car in la... wen i c hw the way they tight the adapter to hold the board, i fark them for 2nd time... due to to adapter it's really loose even hw they tight... den the installer look for another type of screw/bolt to re-tight it... fine, they r responsibility, but i dunno wat the hell happen to dat installer, MIA for an hr... i was in hurry dat time, so i request from their person-in-charge (boss/manager/dai lou/whatever la...) i come bk night time for the installation, b4 they close shop...
mana tau, nite time i been wait for nearly 45min b4 my turn... i juz keep quiet, dulan adi... after my turn, some more me n my fren got to suggest to dat installer hw to proper tight it, btw cant really blame him la, a junior i guess...
so, end of story... brothers i really them... very 'gd' service... nw i keep in mind except for their stuff is ridiculous cheap wit gd quality, or else i wil juz hang around to c their product...

CCFL i DIY by me n my fren, rm28 for the whole set n 1 limau-ice for my fren...

for me it's keras la, but if mount a pair 8" woofer sure habis... forgot adi whether it's into body, i guess nt la... got to confirm wit my fren 1st...

i guess std 6X9 is alright la, im goin to do it end of tis yr... nw using stock HU, no point for me to hv a better speaker...

oh really?! gd to hear dat... it means dat my planning is correct...
mind to state the spec of ur 6X9?! oh ya, n did u tighten the board to the car?!

mine only rattle, nt really rattle la, it's bouncing sound wen i drive thru uneven road more den 50km/h due to i nvr tighten the board... the stands mention by u is the 1 hold the board rite?! mine mayb is bcuz of cut cost, it's made from wood...

gd idea also to put some sponge, but wil the sponge n double sided tape melt for long period at high temp?!

01:51 AM, it's really too late liao... anyway, nw is morning adi, so guess the photo wil b upload soon?!

i dunno dat older kenari dun equipped rear seatbelt... anyway, price u quoted from SC is for 2 seatbelt or 3 seatbelt?! mine equipped wit 2 for rear only, but the pink slip & kenari brochure stated dat it's 5 seater... so wen meet roadblock wit 5person in car, im wondering wat wil happen?!

den u can put 2 pair of 6X9 so the looks wil fullful the board... i guess the fur wil block a bit la, but 6X9, no prob...

very nice theory... anyway, i can imagine hw mine looks lik adi, thanks to u...

stated at post #82, the story of me n my board written there... anyway, summaries, i got it for rm80, install at dumb brothers puchong... actually if u guys planning to install but duwan to put speaker, there is a roll-able type lik luxurious sux, but i was quoted at more den rm100...
perodua should come wit the board lik other perodua car... even it's nt for speaker, v can put our stuff inside...

wat s. plug u r currently using?! i mean b4 iridium... sure significant result if u r upgrade from normal conventional s. plug... oh ya, hw mch u bought?!

is kev da man means body roll?! anyhow, fyi, my ori rear is gas also lo, but stil it kong liao... changed to kayaba excel-g bout 4 month ago... looking fwd to apm performax...

i tried 2days ago... quite disappoint result wit my stock kenari ez auto... 140km for rm30


wen the fuel gauge pointer ngam ngam at E, my so call full tank is rm80 as u said, but actually it's juz almost 30L, i realize that 10L still available... n wat i hate bout kenari is it dun comes wit a petrol warning light...

define the word of stabilizer bars 1st... stabilizer bars is not the specific name... as the name suggested, stabilizer bars stabilize the car, so every bar is included...

anyhow, the UR front tower 4 point bar of mine:


i'm getting the 3 point fender bar soon...