i duno if wanna do engine retune or what.. my car is already about 6-7 years old.. 91k mileage. can start to see wear and tear ady.. duno what should i start to make sure it is in good condition.. should i send to perodua for service ah?

mine is 10yo kenari, 170k km. your engine will reduce slightly? what did you mean by that?

mine is when brake the engine seems shake till steering and whole car oso feel

---

Added on February 8, 2011, 9:06 pm

ciavin tat workshop i went is at SALAK SOUTh

small problem la.... my clutch plate break in the middle of KL noon traffic

is kenari comfortable for long journey ? coz i need a car for my outstation travel .  Seen few modified Kenari to Move .. Is it ok to get one ready made converted to Move .. Any potential major engine repairs later ?

kenari front seat should be ok, not until to say comfortable la. rear seat i know it's terrible.
if you're about to look for a car for outstation use, better you get a sedan car; kenari is a city car.
getting a ready-made-converted car might save your time if the car have no problem at all, but, normally there's problem, unless you know the owner well. by comparing, advantages of convert it yourself is you know what you have to take note on your car while ready-made one you don't even know a thing that you should take note; disadvantages will be it's pricey.
may i know what kind of driving style you have? pasar buy vege and fetch kids to school? normal working life driving? or spirited driving?
how much you change your bucket seat? one pair? brand? erm, as heard from other birdie don't need to change the seat holder right? just replace the seat, it's correct?

Hi Kenarian,

Please recommended me a shop to change my Kenari timing belt and repair my power window and door lock.

Also recommended me what brand/model best for Kenari timing belt.

Prefer Shah Alam area and if possible give me address and contact no.

Thanks in advance.

the railing just PNP?

i got a Bride seat that i wanna install on my birdie

---

Added on March 16, 2011, 9:00 pm

clutch plate with cover, bearing including labour 750

guys, my dad bought me a kenari with 200,000mileage he claim to be a 10yrs old car.

at first it was okay, the only thing was there's this gegar2 sound and i think it was due to the plastic compartment.

then, i duno y, when my dad bought it, i saw stickers saying engine oil, n few other stuffs has been changed and he brought the car to the mechanic to change the gearbox oil. then after they changed the oil, suddenly the gearbox cannot enter "D"

my dad, convinced by the mechanic says it was because the car was old, n the gearbox was waiting for its time to be faulty. if they had not change the oil for gearbox, then its just a matter of time anyway for the gearbox to be broken, on the road. (is this reason valid or make sense? or is the gearbox really like that? a change of oil n it'll broke?)

then he changed the gearbox(automatic). (anyone know how much is the cost for kenari gearbox?) now new problem take place. when i was testing the car, it feels different. somehow, the i didn't feel the gear changes, it just like, static feeling to it. normally, after the gear change, the rpm will drop, then will rev up again. this isnt the case. the rpm stays still, until 3x1000rpm, n the tacho shows around 20kmph increasing. i can only feel the gear changes when the rpm reaches 4-5x1000rpm. somehow the gear ratio is not right.it feels heavy. anyone care to explain to me? thanks in advance

now my car masuk kilang d~~ kesian~~ kena bang by stupiak motor~

damage : front windscreen big crack , left fender kemek , steering bar broken , side skirt crack , front left door calar , side mirror slanting~~ @@

hi guys, i've got a problem with my kenari's wheel allignment. I can't get it right no matter how my mechanic tune it and even changed few tyre shop to tune it, and ended up try a new rims from my fren. Result after new rim was still the same, the allignment just not right. When I speed up to like 100kmh above, the car will dash to left and right, left and right. What could be the affected parts as I experienced in an accident that lead to the damages on wheel bone before.

Please please help..

Hi guys, thanks for the advice

I bought it for 15,500,

I think I am gonna change the mounting also, since it is a lil bit shaking.
any estimation how much does it costs in perodua service center and outside workshop? can it be more than 1k?

thanks

---

Added on October 19, 2011, 7:24 am

where is the address of CV Audio? how much does it costs?

thanx

I'm not sure how to operate the central locking mechanism in my Kenari. The remote is working fine. Once I'm in the car and engage the brake, it will lock by itself. But I just can't find any button to unlock the doors. Pulling the driver side lock won't unlock the locks for the other three doors.

Is it inoperative or there's a button hidden somewhere?

i got a 2nd hand kenari my for 1st car...is there anyone can tell me about the sound system? im planing to change the speaker and add woofer that cost less than 1k

any recommended thing for me??
I need speaker,woofer,cd player