Gud morning Fren !

Iswara Sedan :-

engine bay = 1pcs 10mm

bonnet = 1pcs 10mm

4 door = 2pcs 6mm can divide 2 each enough for 4 door

tq...

---

Added on April 24, 2008, 9:53 amHi AndyNoobie !

Thank for da gud question.Feel sorry coz i'm not provide the installation.But u can ask accs shop to do this installation...as DIY will save ur cost more a lot.

save driving bro!


This post has been edited by wcg6548: Apr 24 2008, 09:53 AM

So far all customer give the good response and making 2nd time order...thanks for all buyer and supports.

Sorry bro...as i'm not provide the installation as mention at my sale advertise.Anyway it was easy to instal a.k.a DIY and saving more money.

---

Added on April 26, 2008, 11:31 pm6mm is now back in town.c u then at same place but not for shopping spree....hehehe

---

Added on April 26, 2008, 11:32 pmWill refer postage pricing with post offs.PM has been replies.tq bro

---

Added on April 26, 2008, 11:35 pmHi bro ,

how much improvement in soundproofing?
is it significant or barely noticable?========> how creative we are to DIY.sweat + energy = priceless.Tq for asking...

---

Added on April 26, 2008, 11:37 pmpm me if wanna do for inside myvi.... alway will be My Victory!yes u can bro..tq for asking

---

Added on April 27, 2008, 11:35 amGud morning to all LYN auto's member..

New update for COD location was been listed.Gigallion Thanks for support!

---

Added on April 27, 2008, 11:39 amGud morning to all LYN auto's member..

New update for COD location was been listed.Gigallion Thanks for support!




This post has been edited by wcg6548: Apr 27 2008, 11:39 AM

Hi mojam ,

Thanks for the question.The answer is Yes!we need to apply the glue 1st b4 stick to the metal area or plastic compartment.The foam with the 3M glue is aesy to peel off when it directly overheated directing from engine or sun.I was been used this product oso.As DIY u can put the glue very easy witin the brush.

Happy save driving

---

Added on April 27, 2008, 10:46 pmHi fooken,

Congratulation!U made it...btw ur cool with the little "mini's"Just to mention ++++too young but old skool++++.Keep up the way man!tq

This post has been edited by wcg6548: Apr 27 2008, 10:46 PM

Hi stupid6383,

All estimation price and consultation has been send.Pls check ur PM.TQ

---

Added on April 28, 2008, 11:11 pmHi fooken ...

Your on the right track man!Just call me for the mini project anytime...LIVING LA VIDA LOCA!

This post has been edited by wcg6548: Apr 28 2008, 11:11 PM

Million Thanz to Mr Ben aka necromencer for the great support!Sorry as i'm rushing that night.Anyway the "isotonic drink" make me feel better.Thank again bro.

heheh...overnight rite!so u need be faster respond when drive coz sumetimes neverheard "police siren" behind u...

Hi rigaries,

Thank for asking.Anway pls check ur PM as was replies already.cheeeze!

Hi MichaelTKW...tq for the question.Pls check ur PM for further info's.tq

---

Added on May 6, 2008, 11:34 amHi farris , gud imagination rite?soundproofing???? can't feel but can hear more or better than b4.tq

---

Added on May 6, 2008, 11:36 amGud Morning ykmy ,

Car boot - 1pcs 10mm or 6mm ( depend by ur budget or requirement) enough to cover all square area.

---

Added on May 6, 2008, 11:39 amPM has been replies.Many thanz!

---

Added on May 6, 2008, 12:46 pmHi
Herewith attach the function and information about the Bitumen.
Bitumen Information :

Size:50mm Width x 10 Meter Length
Thickness 1.5mm

This Black bituminous compound consists of self adhesive polymer modified bitumen layer coated on to a tough high density polyethylene film and covered by an aluminium foil.
It is economical, cold applied instant flashing tape which is ready to use to waterproof with outstanding durability. VitalBand provides excellent adhesion, improved heat resistance, tear and puncture resistance, and chemical resistance to chlorides, sulphates, alkalis and acids.
Applications:
Protection: Asphalt, brickwork, concrete, fiber cement sheet, metal and plastic materials, roofs and covering, etc.
Sealing & Waterproofing: Glass & plastic windows frame, parapets, skylight structures etc.
Repair Work: Metal and fiber cement sheet roofing, shingles, gutters and metal tube etc.
VitalBand is generally used as waterproofing and damp proofing membranes intended for concrete protection. It may be used for horizontal and vertical application and as a damp proof course for tanking below ground structure, subways and retaining walls.

Specification & Properties:
APPEARANCE BLACK TAPE
SURFACE PE COATED ALUMINIUM
ODOR ASPHALT ODOR
ROLL LENGTH 10 M
ROLL WIDTH 50 mm
THICKNESS 1.5 mm
SOFTENING POINT (ASTM D36) 110°C
ADHESION STRENGHT (ASTM D1000) 2.4 N/mm
PUNCTUAL RESISTANCE (ASTM E154) 220 N
CRACK BRIDGING ABILITY (ASTM C836) 1 mm
TENSILE STRENGHT
MEMBRANE (ASTM D638) 2500 KPa
FILM (ASTM D638) 23 MPa
ELONGATION (ASTM D638) 300%
ENVIRONMENTAL RESISTANCE (ASTM D543) PASS
WATER ABSORPTION (ASTM D570) 0.02 % AFTER 24 HOUR

---

Added on May 6, 2008, 12:52 pmHehehe ...everyday u always been pro's not look alike.So how the bitumen project?Anyway thanks for the good support...

This post has been edited by wcg6548: May 6 2008, 05:54 PM

Ur'welcome bro.

---

Added on May 7, 2008, 12:27 pmDear LYN Auto Member....

New picture for Door Trim and Fender Plastic Cover will upload soonest.tq

This post has been edited by wcg6548: May 7 2008, 12:27 PM

Dear kambing_hebat,

Pls check ur PM.all question has been notify.Many Thanks.Regards

---

Added on May 9, 2008, 10:08 pmPM has been replied.Thank Bro!

This post has been edited by wcg6548: May 9 2008, 10:08 PM

Pls check your PM.All information needed been replies.tq

Gud day mate!

Pls check ur PM as been reply!Many Thanz...

---

Added on May 13, 2008, 10:50 amHi QiQio,

ALL PM has been reply.thanz!

This post has been edited by wcg6548: May 13 2008, 10:50 AM

hI momocow,

Nice avatar u have.Btw pls check ur PM has information and qoutation was been replied.Thanks!

Hi zizheng,

Yes!this is the way to reduced the noise while driving on h'way / normal road.Tips on it + stick the found inside the fender above the plastic cover + foam to ur engine bonnet....neeeh!Make ur driving as sleep on ur nice home bed & nice dreaming ... :)Iswara!not bad as another car oso.Bit different only how may $$$ we invest to get the car "LOGO'S" only.thanks

---

Added on May 20, 2008, 2:05 am
Many Thank jiash87!

Nice information and method u have.Another way to "firewall" is just stick the bitumen foil upper the inner fender metal part only.Solve 1thing problem.

This post has been edited by wcg6548: May 20 2008, 02:05 AM

Hi

Sorry for my typo errors *stick the found------>foam inside the fender above the plastic cover*

No need to remove the fender laa bro..just taken out plastic cover and stick it ( foam/bitumen ) at the humps b4 put the plastic cover back.

Gud Morning pokju,

Bitumen : used widely for wrapping metal part to avoid rust, seal the metal, and protect the metal.

It is widely used in the protection wrapping of Cast Iron in transporting system.

It can be also used for waterproofing usuage.

Thickness: 1. 5mm-3mm.

The way we soundproofing as DIY bitumen can be more proven for solidness sound from metal part without kling,klong,esp for doors or bonnet underway carry.

It will leak after we stick it at metal part that we will never used for any car service or upgrading.That is the way "bitumen" work job
Normally used for optional as required by user itself.TQVM

---

Added on May 23, 2008, 12:23 pmHi zizheng

taken out the plastic civer and wrapping it with foamin put it back to the hump or fender...hehe tat is da way bro.

Fast learn....used for earn + satisfaction



This post has been edited by wcg6548: May 23 2008, 12:23 PM

This type of foam not come with self-adhesive...just need CA glue b4 with stick it.More effective and not easy to peel off.tq

Hi tony 200,

Thank for arise the question.Btw ur the right track for the answer.

---

Added on June 11, 2008, 12:53 pmHi bro...pls check ur PM.thks

This post has been edited by wcg6548: Jun 11 2008, 12:53 PM