yeah, lack of ocing features. ikut ati, nak je grab terus DFI 790FX M2RS...
M2N-E is a full ATX mobo....

some basic guide summery:

- set AI Overclock to manual
- lower the HT multi (HT Freq) from 5x to 4x
- set the RAM speed to 533-400mhz
- lock the PCI-e at 100MHz
- lock the PCI at 33MHz
- disable ALL Spread Spectrum settings
- disable Cool 'n Quiet
- raise the CPU Freq a little at a time from 200MHz towards > 300mhz (5-10MHz at a time)

This post has been edited by rainingzero: Apr 14 2008, 10:24 AM

@pikacu
-disable CnQ, spread spectrum
- increase ur Vcore a bit
- lower ur ramspeed
- increase ur Vdimm
- increase ur multiplier..(since u are using BE, increasing multiplier would be the easiest way to oc ur proc)

ask dj^erizz..he is using MSI mobo paired with 5000+ BE...

Asus offer really rock solid ocing during intel pentium 4 soc478 era dude...
remind me of those P4C800/P4P800 deluxe etc, really nice...they got offer 875 board too..that time that chipset really rare...
for intel platform, their mobo really rock~ its just for AMD platform, asus mobo not doing well lately..
maybe they just concentrating on intel platform...

some AMD gigabyte mobo good too..its just MSI i dont really know much about their mobo...

want a good looking mobo with a great oc-ability??
go for DFI 790FX M2RS or M2R....

This post has been edited by rainingzero: Apr 15 2008, 02:24 AM

for mild ocing, 2.0-2.2v for vdimm is still in safe range. however, addition of active cooling might help ur rams to last longer...

yours is DFI nf590?? dont wanna sell ka?? pm me yea~

u got DFI 790FX M2RS somemore, jgnla kedekut~
wanna try DFI plak....

sometimes the mobo got bad Vdrop, have to increase the vcore a little bit...

urs is V1/V2/V3??

This post has been edited by rainingzero: Apr 16 2008, 09:55 PM

try to maintain ur HT link in below 1000 for more stability...

@liuteva
what is the temp for ur proc while idle and full load??
wanna know the temp while using Big water 735

i didn't see any diff during benchmark between higher HTT and lower HTT.
tested superPI 1M with 1200HT and 900HT. both got same result.
or is it not affected much in superPI?? better result in 3d/pcmark maybe??

just show us screen shot as ur ocing result. what need to included are:
-orthos 1hour or more
-SuperPI 32M
-SuperPI 1M
-Show ur cpuZ SS with ramspeed and clockspeed

from ur siggy, ur ocing result quite nice...

finish my last paper last week already...now preparing for viva...
after this entering works life....dunno if still got free time roaming at LYN here...