Eh......didnt know blend test was 1 of the requirements?? Sienz la....lastime i tested my sempron with small fft only coz i was targetting cpu stability

This post has been edited by joe_star: Apr 20 2008, 02:22 AM

1M Test:

27.410 | X2 3800 F3 @ 3338MHz | Liuteva | Gigabyte GA-MA78GM-S2H | Corsair Twin2X2048-6400C4DHX | 834MHz | 5-5-5-15-21-2T | Thermaltake Big Water 735

dude, cant put the divider at 667? ur ram cant make it?if can, for sure ur spi1m will improve lots

bro -pws- can upload my old brisby 4000 1m result?

if can, here's the detail..

30.875 | alive88 | 2909MHz 277x10.5 | Biostar TF590SLi | 2x1GB Corsair C5 XMS2 | 968MHz @ 5-4-4-13-23-2T | Stock Heatsink

http://forum.lowyat.net/index.php?act=Atta...=post&id=396841


This post has been edited by alive88: Apr 20 2008, 10:37 AM

Sorry to make you guys confuse.
I want the database to be CPU n RAM stable.

-pWs-

my input.






Sorry, my previous overclock fails to run stable blend at orthos )=


and my superPI 1m (hella slow) :

http://www.imagehosting.com/out.php/i1706553_superPI1m.jpg

This post has been edited by pikacu: Apr 20 2008, 12:10 PM

... My mobo max vdimm is 2.1V, if put divider 667.. fail orthos blend..

try for ur spi1m first..

cheap...as in how much cheap is it...

Maybe RM 300 only lor



CM 590 and CM 690 WHICH one is better in Airflow or whatsoever related to casing?

@pws..thanks for putting me in the list

hey,rm300 is madness..
if me, i would prefer CM690..i think its bigger..coz CM590 is just like CM C5 but with different interface only..

@mr_habuk, wats ur expecting price can pm me ar

Sorry to said da GA-MA78GM-S2H ....kedukat to give voltage

@mr_habuk
maybe i know wat the reason u wan to sell dfi dk 790 ??? Performance no good enuf or ??

This post has been edited by digswell: Apr 20 2008, 01:38 PM

taken from his selling topic :

"Reason for sale:reason buying this board for is for phenom..but waiting too long edi..go for intel quad la.."


so..if phenom b3 out..then maybe he will nt sell it?

He really going to Intel ler,cos Current Phenom Seller in Bulk Sections,selling at higher prices which not really worth(9850).So he go Intel lo..

As promised to bro xixo, here you go few screenie that u guys might be able to determine what is the problem actually that I cant boot at 1.45v at 3.5ghz (Hardwares differ from bro sempronic but 3.5ghz I had to pump till 1.5v something.)













This post has been edited by mizivincible: Apr 20 2008, 05:20 PM

i no think the reason is da....the truth reason...haha. maybe he dont to say.
DFI mobo a few lost performance edy

---

Added on April 20, 2008, 5:02 pmDont use auto select for FID and VID
maybe can try pump 1 step n/b and s/b voltage

This post has been edited by digswell: Apr 20 2008, 05:06 PM

it's actually more on budget..
my son will be coming in june, so more money needed cannot afford major hardware change..
125w..crossfire summore,,

dude, actually if u can order from amazon it just gonna cost u like RM750 only..

Added another two SS, FID and VID into previous post.

Select maxsinum for FID and VID
FID =atually is multipier (select x10 2000mhz if u use 3800 f3)
VID =Actaully is cpu vcore (select 1.25v )
VID hv to locked becoz u will hving vdrop when wan to boot and some other thing like vcore no at stable voltage ...and bla bal

This post has been edited by digswell: Apr 20 2008, 06:09 PM

Yeah, that's what i thought about FID. But, mine doesnt have x10 ! I was wondering where to change the multiplier tho,that's why I just set it to auto.

Anyway regarding the VID - the 1.25v is only apply during certain speed or I can use that for my entire oc ?