i dont know bout the sifu cooler..but im using tuniq tower 120..find a decent cooler and a gud chip to ensure ur oc ability to the highest

usually i didint touch the nb voltage..just increase vcore only..bear in mind that diffrent chip has diffrent OCability..try add vcore first.

relax guys..gud things dun come easily..@amd, rm180 for 2.9ghz at stock vcore is tempting..i paid 250 for my proc..thats the different..

ive bought new gc..hahahahahahaha..

ive bought 8800gt..coz ive always wanna try this gc..cheap also got..ehe..

any hardcore results from V3 F3??



how to remove my old 7900 driver?

@mizinvincible..
dont remember wif stock vcore and stock speed..
but at 3.3ghz@1.392vcore, idle 30, full load 44@1250rpm or 40@2000rpm

im using tuniq tower..i use biostar bundled software and also everest and pc wizard to check my temp..u use wut cooler?

http://forum.lowyat.net/index.php?act=Atta...=post&id=414833

this is my temp..look at the fan speed..

urs is close case or open case?mine is open..wif one delta exhaust fan..tuniq using its own embedded LED fan..i dint lap my base..just plain mount only..

yup..the ss is my daily setting..why?( i know the vcore r a lil bit high)

This post has been edited by alive88: Apr 10 2008, 04:23 PM

nope..it suppose to stable at 1.375, but my board will increase automatically to 1.392..thats why..htt and nb voltage never touch..vdimm is 2.1..wif active cooling

uish..dun say that le..
new f3 cant be oc, coz my fren's rig will automatically shutdown if i oc..i wonder if the cpu power supply not enuf?coz it need 8pin while his acbel psu only 4 pin..maybe thats why cant oc..ehe..

@xixo...want to do that at first..but after ive thought about how hard to mount
tuniq, i raised my hand..haih..

@amdathlon..make sure that u have 8 pin power supply for ur cpu..if not, u wont get to oc well...FYI, vcore supported only 1.57, and vdimm is 2.5..vcore is not enuf for hardcore

in term of vcore and vdimm, ta 770 better

for me, its 3.3..

dun say that la bro..
hehe...busy ar now? me already study week..

mine in bios 1.375, in cpu-z 1.392(mobo will automatically raise vcore a bit)

is ur bios is still in OC condition?
coz single sided ballistix s*cks

ok..reset cmos..this new ram cant oc well as the double sided one

owh..its rainingzero's birhtda..haha..get urself a new hardware for ur birthday..
11.84v for 12x rail is good enough..another most important thing u need to alert is that the 11.84x doesnt flactuates a lot..as if when u stress wit orthos, it wont fall untill 11.50 or sumthing like that.if its over than 12v also is not good..overvoltage wl kill ur hradware like mosfet and cpctor..

and mine you, sometimes the rail voltage reading also depends on the mobo itself..

This post has been edited by alive88: Apr 12 2008, 01:48 PM