u mean tmpsetfsb??

2" degree is big enough..

i wonder why ur board dun support this ram?
should be no problem isn'it? cannot boot up?

wuah.. i think 1066mhz will be hv more fun on ur board.. ha! same price to corsair?

lol.. i like this... NOT ALL mandarin oranges are sweet
just like both my E2180 and E2160.. both not sweet at all..

This post has been edited by chchyong89: Aug 7 2008, 08:19 AM

lol.. this problem really weird.....
try swap here swap there still the same?
ur intel look hate the 600W PSU already. ha!

BSEL on processor can fix this problem^^
straight BSEL to 1333Mhz/1066Mhz on e2 series, no more restart restart liao..

this is example of hard mod.. bsel.. can solve the P35 self restart problem

This post has been edited by chchyong89: Aug 17 2008, 04:23 PM

lol... crazy voltage with me? see my 24/7 rigs.. nvr scare to burn it.. but since more than 1 month no shutdown the pc + no BSOD happen, just let it burn, by the way, already have my budget for coming nahalem

temperature will be my big secrect..
get wat i mean?

no vdrop on my msi board.. just got vraise set at 1.65v and get 1.68v... thermaltake bigtyphoon with no thermal grease, why no thermal grease.. all money on nahalem.. so even RM20 oso need save even one meal not exceed more than RM5

this cannot be save... since drama always..^^

the best i can go on my old RM130 ECS 945GC.. maximum already.
won't recognize voltage mod, no voltage settings, make this proc stop at just here.. so sad.

can set but no effect at all..
cpuz and coretemp still showing the same vcore..

simply use any foil paper and touch both pin.. tin foil is just too thick

This post has been edited by chchyong89: Jul 23 2009, 03:50 PM

here is my bsel'ed E2180/2X1GB DDR2-667 corsair on ECS 945GC.. oc'ed @ 3Ghz by setFSB.



just get any alluminium foil paper, instead of tin foil. Simply use glue to paste on it.

However, i done 333Mhz bsel mod before on P35 long ago. And take note, 333Mhz mod NEVER will work on 945 chipset!

p.s. My processor temp is high, because i running my stock cooler @ 5v less than 1000rpm. load@60" max@62" , why? because i hate noise.. especially those cm blue, green, red fans, when supplying 12vdc : , the noise really make me goes like hell...

This post has been edited by chchyong89: Aug 6 2009, 11:43 AM

u are using G31-ES2l right? if with the onboard graphic card, your FSB never can hit high...if you were, it will causing your graphic card either showing artifacts around or may stop working when u having 3D tasking. The only way to break the limit, BSEL it, this board don't recognize 266Mhz and 333Mhz mod, it only recognize 300Mhz mod by using 266Mhz method. Btw always remember set everything to default and lower down the multiplier before you going to link the bsel pin. :} have fun..

---

Added on October 17, 2009, 8:14 pmu may try the 266 mod...
here you go:-


and don't waste your time on 333mhz and 400mhz mod on 945GC, it never can be done by whatever method :}

This post has been edited by chchyong89: Oct 17 2009, 08:14 PM

just link the pins i shown in last post will do..

1. Lower down ur processor multiplier and set the FSB to default
2. take out the proc and link the pins together
3. boot up to check whether it's @ 300Mhz on giga G31 ES2L

---

Added on October 21, 2009, 5:22 pmLower down ur multiplier to check whether it's a FSB wall there.

This post has been edited by chchyong89: Oct 21 2009, 05:22 PM

using onboard graphic card? that's normal.. there is only two ways to solve it, install a vga on it, or BSEL ur processor.

This post has been edited by chchyong89: Nov 4 2009, 03:04 AM

what's ur temperature for it