vtt and cpu pll is needed for going High FSB, GTL affects more on quad core, dual core sometimes would help too

razr_sped, i didnt know x38 can be so powerful hehe......... but i think may be a1098113 theory only applies till certain extend only. but i do know believer x38 can perform up to 600mhz on fsb without problem, but should need quite some voltage.

some findings to share,

i found something weird running on 425mhz on FSB, it seems that it gives some data corruption. run OCCT, prime 95 all stable, but it seems in game it will crash or ur pc opponet like superfast.

another weird thing just came up too, it seems on multi 9, i cannot do 360 ~ 390 FSB stable, prime blend test will fail in few seconds, yet small or large FTT runs stable for hours. Weird..... need more time to figure out

1 more weird thing, i notice on lower fsb the temp of my proc is lower too even with similar voltage at same ghz. really no idea apa jadi... lol

just wish i got more time to test things out

ur voltage making ppl sweating wow..........

well about the temp, it different case compare to my old q6600..... i tot same architecture may give similar result.......

this weekend got sometime, see can make any break through or not

it more like latency is more important, so far the best is CL4 @ 1000 mhz i suppose....... for DDR2

but DDR 3 may be different case

Techfrix, it is very normal for load temp around 50oC even for stock speed with giant 3rd party cooler.

fylon, what oil pumping u refering to ??

the cache dun do much differrence unless ur clock is just around 100 ~200mhz difference in application or gaming..... in ur case ben3003, it 400mhz apart, e6300 will be fry definately haha.........

tech-frix what you did during bios flashing ? having a mobo frying session ?

AMDAthlon, the coming E5 should be quite interesting price also quite tgood as it target around USD 80 ~110 frame

why u want e6 series when u can get E7 series around that price to play around

well i think i have to flame u in this case tech_frix........ only e6850 manage to 4ghz and above, others dun do so well, but still can hit 3.4 ~ 3.6...... only thing good i know is the higher multi...

e7 series is 45nm rite? should be even better......

there is e7 thread here, u can go check it out

haha....... may be .......what happen to ur IP35 ?? u burnt it ?

a1098113 , Wah ur voltage how much u set in bios ?? interested to see that figure.......

i think ur bios is corrupted..........

may be is the bios chip has been degraded

cost everyone ditching their e2xx already also lol............