i dun really need black besides the platinum ones look very good too and i dun wan the hassle of adding a step-down transformer.

im just wondering what kind of price would it be or should i go for the rxv1800 that i cant afford?

talking about that, what will you fellas do once you replace your current AVR with a new one? will you sell it away or move it to another room?

my AVR is still in good condition .....im just thinking move it to a different room nia...sell also no value

wah liddat summore not elite ah?
niasing la, liddat i better dun tell ppl i buying 663....sangat memalukan...

if 863 is 3k then might as well buy rxv1800 at rm3600....

for me the only difference among them is the power. of course extra features (which either got use or not only). how to consider mid range, high range and low range? to me there is only 2 levels - either top end like Z11 or the rest like 663, 863, 1800, 3800

what audio processor is 663 vs 863 vs 1800 vs 3800 using?

This post has been edited by DigitalKL: Apr 15 2008, 05:31 PM

*yammy 795a owner also hides in cupboard with shame*


btw if i buy 663, is it consider downgrade from my 795a?

This post has been edited by DigitalKL: Apr 16 2008, 10:44 AM

congrats!

berapa? pls give review after wards ha

your picture why so blur wan, got money to buy 663, no money to buy better camera phone ah?

*sharing grapes with rx330*

niasing that A&L in swp quoted me 3.6k, then when i was at ampcorp mall outlet, i sibuk asked again, they quoted me 3.8k. i said, your swp quoted me 3.6k, he shake his head.....

3.5k who selling? better not be Legend............kekeke

This post has been edited by DigitalKL: Apr 16 2008, 04:53 PM

this 663 now doesnt look very good ho?

no choice but have to go for






This post has been edited by DigitalKL: Apr 16 2008, 10:28 PM

or Onkyo 805/875?

---

Added on April 16, 2008, 10:33 pmrxv1800 from rm3500 to rm3600

This post has been edited by DigitalKL: Apr 16 2008, 10:34 PM

sham73, you where got care, you already using 3800 mah

---

Added on April 17, 2008, 11:21 ammore like robber will follow you back....


This post has been edited by DigitalKL: Apr 17 2008, 11:21 AM

anyone knows what 663 vs 1800 is using for DAC?


at yamaha website it says -

rxv1800 = Burr-Brown 192 kHz/24-bit DACs for front channels and 192 kHz/24-bit ADC for Main Zone
rxv663/863 = Burr-Brown 192kHz/24-bit DACs used in all channels


so what does that means har?

This post has been edited by DigitalKL: Apr 17 2008, 11:53 AM

i noticed one thing. US Yamaha website says 663/863 is 7.2 channel but Yamaha Global site says its 7.1 channels.....

must wait for sifu sunauto to answer my questions....

shooo...Go AWAY!

i think the rx-v1800 is out for me too

Output at clipping (1 kHz into 8/4 ohms)
1 channel driven: 158/281 W (22/24.5 dBW)*
5 channels driven (8 ohms): 103 W (20.1 dBW)
7 channels driven (8 ohms): 55 W (17.4 dBW)
Distortion at 1 watt (THD+N, 1 kHz)
8/4 ohms: 0.02/0.03%
Noise level (A-wtd): -73.4 dB
Excess noise (with sine tone)
16-bit (EN16): 0.9 dB
Frequency response: 20 Hz to 20 kHz +0, -0.2 dB

This post has been edited by DigitalKL: Apr 17 2008, 02:27 PM

jangan marah - http://www.soundandvisionmag.com/receivers...v-receiver.html

you go read the test bench of other AVR, they dun simply drop current when connected two extra speakers.....

1800 and 3800 is almost the same spec.

anyway i think sunauto makes a good point - the Burr Brown DAC use in the yamahas are ....lower end than lets say Onkyos

here -

The PCM1792 chip is preferrable because it has a dynamic range of 132dB.
The PCM1796 has a dynamic range of 123 dB.
The PCM1791A has a dynamic range of only 113 dB.

Denon 4308CI and Yammy RX-V3800 have the PCM1791A.
Onkyo 805/875/905 have the PCM1796.
Yamaha RX-Z11 has the DSD1792.

and i dun understand what this means =
rxv1800 = Burr-Brown 192 kHz/24-bit DACs for front channels and 192 kHz/24-bit ADC for Main Zone
rxv663/863 = Burr-Brown 192kHz/24-bit DACs used in all channels


so what is 1800 using for the other channels? 663 is even better?