today when i install my mobo, my gc press till dented the capasitor metal cover.. wont damage anything right..? my 8800GT got 1 part too long, i didnt notice and still thinking why my gc doesnt fit in.. now ok liau la.. working properly, but the dent at the capasitor no problems 1 right..?

i really scared got problem ba.. coz really blocking the way.. then i have to move the capasitor aside a little than can fit in nicely.. haha.. scare me le.. haha..

i think so.. and i think my NB producing a lot a lot of heat now.. haha..





Thanks to mfcm for guiding..~

audio jack problem..? mine ok ler.. the green 1 right..?

u installed the driver correctly.. i think got 2 drivers for the sound.. HD audio and normal 1..

not more than 1.45V for 45nm not more than 1.55V for 65nm..

---

Added on May 4, 2008, 2:30 pmim planning to buy a HR05 SLI/IFX for my Mobo.. coz the ori NB heatsink seems to be too hot..

Do u guys think it might help..?

This post has been edited by StratOS: May 4 2008, 02:30 PM

ei.. sry.. see wrong.. duhduh.. VTT not sure..

-pws-.. how thw hr-05 working with ur mobo..? good..?

i wanna change mine also ma.. but scared till kena my typhoon lo.. coz typhoon too big ba.. haha..and my NB cooler now super hot lo.. coz i increase the voltage for it also..

owh.. can take pic see ka when u got time.. hehe..

tats er.. good.. haha.. but my 8800gt produce so much heat(especially the back).. will cool it down mer or make it worse..?? haha..

u guys use wut program to determine the chipset temp..?

ok.. will try it tonight.. coz i touch my NB heatsink really very hot now.. coz i got increase it voltage..

i think i put it at 1.37V now.. stock at 1.33V..

if i leave my air-con switched on(usually 20-23C) and side panel off.. should be performing ok.. room temp around 26C and side panel on.. will hang and auto restart..

45c and above..? really..? mine slightly near i guess..

i think will be unstable a bit gua.. coz i OC my proc ar 445X9 also not stable.. NB temp at 45/46C.. increase voltage still same.. hmm..

@tkh_1001.. u using wut FSB X Multiplier.. wuts ur vcore for proc..?

wuts a GTL..? haha.. im noob here..

mine can run at 4.0ghz at 1.13V vcore le.. Idle la.. 1.3v at load..