DFI LANPARTY DK P35-T2RS, Discussions and Results
|
|
 Feb 12 2008, 08:44 PM
Return to original view | Post
#1
|
 
Senior Member
2,378 posts Joined: Jan 2003 From: Miri,Sarawak,Malaysia Status: Dead!   
|
QUOTE(remysix @ Feb 12 2008, 07:35 PM) both are good hsf...but for xigmatek, try to replace the push-pin (really hate it! Picture tells it all.   ) with the spring loaded bolts like the one used with Ultra 120.   |
|
|
|
|
|
Feb 26 2008, 01:09 AM
Return to original view | Post
#2
|
|
Senior Member
2,378 posts Joined: Jan 2003 From: Miri,Sarawak,Malaysia Status: Dead!
|
Q6600 G0 2.4Ghz 1.2v idle vs 3.5Ghz 1.43v idle, temp difference only 4c in air-con room.
  @vearn27 Try OC your proc. |
|
|
Feb 26 2008, 09:33 AM
Return to original view | Post
#3
|
|
Senior Member
2,378 posts Joined: Jan 2003 From: Miri,Sarawak,Malaysia Status: Dead!
|
QUOTE(vearn27 @ Feb 26 2008, 02:06 AM) Wa... you got some very good temperature reading compared to mine here which running at stock at the moment Just don't know if you OC your proc, what temp you will be getting. Curious. What's your method for applying your HSF?QUOTE(remysix @ Feb 26 2008, 08:36 AM) the CPUTIN supposed to to be the cpu temp rite...mmm...how come ur cores temperature lower than ur cpu temp No idea if the reading is accurate or not. My casing is full with high CFM fans. |
|
|
Mar 18 2008, 02:31 PM
Return to original view | Post
#4
|
|
Senior Member
2,378 posts Joined: Jan 2003 From: Miri,Sarawak,Malaysia Status: Dead!
|
How much vdroop you guys get? I see some suffer 0.06v.
Those using D9GMH/D9GKX, mind testing if you can run 4-3-3-9 or 4-4-3-9 450mhz with 2.05v/2.1v or not. What's the lowest tRas it can go? Thanks.  This post has been edited by Hyde`fK: Mar 18 2008, 02:39 PM |
| Change to: |  0.2948sec
 0.75
 7 queries
 GZIP Disabled
Time is now: 13th December 2025 - 07:47 PM |
Quote