your chipset fan, 60mm or 70mm maybe... i think much better if get thin profile fan there

Save another RM50 can get the TRUE ma....

Dunno about the hyper212 but I would recommend the Xigmatek S1283 for a max budget of RM200.... 

Currently we are having difficulty to obtain the needed hard disk; our component supplier ran out of the stock at the moment.

            It might take much longer than we previously expected.

          However we have tested Seagate Barracuda 7200.10 500G hard disk for this enquiry, and the test result came out fine on LP DK P35.

        According to our experiences, hard disk compatibility symptoms on Intel platform normally occur during BIOS POST stage.

        The described symptom is more likely to have something to do with hard disk firmware.

        The major change between Barracuda 7200.10 and 11 is on its buffer memory and mostly importantly on its access speed; therefore we would suggest that user to set the Jumper Block to "Limit to 1.5Gb/s Operation", this jumper will reduce the hard disk speed to SATA 1.5Gb/s. If user's hard disk work fine at the speed of SATA 1.5Gb/s, this issue would likely to be hard disk firmware issue.

        Please advice that user to set the Jumber block to 1.5Gb/s to see if system behave normal on this case and write to us to let us know how it goes on user's end.



Best Regards,



Frankie Hsieh

Technical Support Engineer