Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

Renovations renovation cost

views
     
eeezal
post Nov 3 2012, 02:22 PM

New Member
*
Junior Member
26 posts

Joined: Nov 2012
QUOTE(shawnsean @ Sep 8 2012, 09:46 PM)
hi, anyone know the cost of replacing old roof tiles with new roof tiles (cement tiles) and changing the support structure from wood to steel for a roof that is about 20ft wide and 50 ft long? and also use aluminium foil as insulator
*
1)Supply N install lightweight steel truss roughly around RM4.50 - RM5.50sqft depending on design.

2) Supply N install concrete tiles around RM3.30/sqft depend on design too

3) 2 sided aluminum foil (use wt good quality mesh) around RM1.30/sqft.
for single sided is much more cheaper but i advise u not to use it coz it is easily tear-able.

Hope this info can help u out. anyway if u want good contractor to do your roofing do PM me. icon_rolleyes.gif
eeezal
post Nov 9 2012, 05:58 PM

New Member
*
Junior Member
26 posts

Joined: Nov 2012
QUOTE(kochin @ Nov 8 2012, 11:55 AM)
boss, how much approximately to do the following:
1. remove all existing concrete roof tiles
2. supply and install 2 sided aluminium foil with mesh (rm1.30psf is it?)
3. supply and install BHP Lysaght roofing complete with insulation (say trimdeck with 0.42mm tct lah in colour)
4. dismantle and reinstall solar water heater
dimensions wise, give or take 23x70 landed with around 30 deg pitch.

estimated duration?
can be done with people staying inside without disturbance?
arigato!
*
Normally removing existing concrete tiles roughly will cost you around = RM0.70 - 0.80/pc
- Supply & install 2 sided aluminum foil = RM1.30/sqft

Somehow for item 3 if you want to install BHP lysaght complete wt insulation the you dont need to install the 2 sided aluminum foil
becoz the insulation (P.U foam) that comes wt the m.deck is good enough. Price around RM 6.50 - 6-80/sqft.

Dismantle & reinstall solar heater I'm not sure but definitely in Lum Sum but you can ask the contractor to help install it.

If Dimension 23x70, the flat area should be = 1610 sqft
and if at 30 degree pitch = 1859.10 sqft
But do take note on the overhang. Normally should calculate together wt the overhang part.

ope this can help you out. Do PM me if you want the contractor no. icon_rolleyes.gif
eeezal
post Nov 19 2012, 02:48 AM

New Member
*
Junior Member
26 posts

Joined: Nov 2012
QUOTE(kochin @ Nov 9 2012, 09:30 PM)
add add together around rm7.60psf x 1500sf (i use 1500 because 23x70 is land size lah) = rm11,400
add another say rm300 for the heater = rm11700.
say rm12k.
walau weh!
*
Actually why must u use the type that complete wt insulation foam where else using double sided aluminum foil also is good enough
for insulation. You can save up to rm3.00/sqft which is quite a lot bro.....hehe hmm.gif hmm.gif
eeezal
post Nov 19 2012, 10:30 PM

New Member
*
Junior Member
26 posts

Joined: Nov 2012
QUOTE(sovietmah @ Nov 19 2012, 09:07 AM)
I have been quote this:
RM 8,200.00
Supplied and installed ( Concealed wiring c/w cement plastering ):-
( Ground floor )
- 1 no of Astro point
- 1 no of Tel point
- 1 set of 26 way DB Box
- 2 nos of Air-cond point
- 2 nos of Fan point
- 16 nos of Light point
- 15 nos of 13A Power point
( First floor )
- 1 no of Astro point
- 2 nos of W/Heater point
- 3 nos of Fan point
- 3 nos of Air-cond point
- 16 nos of Light point
- 10 nos of 13A Power point

All conceal
22x70 double storey.
*
Quite expensive Bro... hmm.gif


Added on November 19, 2012, 10:37 pm
QUOTE(sentinal3_16 @ Nov 18 2012, 05:56 PM)
Anybody can share of a reasonable renovation contractor in Klang?Thanks.
*
Already PM u the no.

This post has been edited by eeezal: Nov 19 2012, 10:37 PM

 

Change to:
| Lo-Fi Version
0.0219sec    0.53    7 queries    GZIP Disabled
Time is now: 10th December 2025 - 02:18 PM