Go here.... http://forum.lowyat.net/topic/491075 no need 2 close..... U can feel free 2 ask anything... ppl there might be able 2 help u...

-Thread Moved.

hmm... pump fsb lor, intel is pretty much simple

btw, it would be better if you listed your specifications. ( i will assume ur sig is not the one ) and xms2 sux balls

XMS2 SUX BALLS?? wtf..never knew that...ok..now i want to sell it off..haha..exactly like my sig..can help?

i mean they suck because for the almost same price, you can get much better ocing rams, like balistix, team elites, gskill etc etc

O ok, as per your sig, hmm... nforce chipset huh? :S

well for starters, go to bios, set the ram ratio to 1:1, so that its the same as the fsb. then pump the fsb, and set the memory command to 2T instead of 1T to see how far they can go

oh yeah, one more thing is that nforce chipsets are known to be nuclear generators snce nforce4 days. so... check the temps of it la

thanks..i have added a fan on it..

---

Added on January 26, 2008, 1:12 pmhmm..can i add a DDR2-800 RAM to my rig?

This post has been edited by ericmaxman: Jan 26 2008, 01:12 PM

Added fan Hav u done da steps as mentioned above???

N DDR2 800 can.... But it will only run @667 Might as well stick 2 ur old 1....

will do it afterwards..how to set the RAM:FSB ratio? cant see those settings

for waht you wanna add ddr2 800 rams to your system? its wasted power due to the NB bottleneck, heck even ddr2 533 will be wasted power hahahah, unless if you oc more then 266fsb ( QP for 1066)

hmm its normally called 1:1 ratio, or synchronous in the bios, it should be in the ram section

This post has been edited by bryanyeo87: Jan 26 2008, 01:30 PM

will try to locate the settings

---

Added on January 26, 2008, 1:32 pmhmm..there is none..but the is a linked for FSB..is it that one?

This post has been edited by ericmaxman: Jan 26 2008, 01:32 PM

but again, please be very aware that nforce chipped boards are nuclear generators. they are HOT, even at low fsb speeds of 800

i know..really regret buying it man..
btw, here is a screenshot..




This post has been edited by ericmaxman: Jan 26 2008, 01:36 PM

is that your stock fsb or have you upped it already?

the voltage for cpu is abit high at the moment, lower it to 1.3v first

i've upped it..the voltage lower it? ok..wad about the ratio?

done..the voltage now is 1.3000V

This post has been edited by ericmaxman: Jan 26 2008, 01:43 PM

FSB speed set it to stock. QDR = 4x the actual fsb

the NEW mem speed, set it to something lower, it should be the lowest speed, which is normally 1:1,

so, the FSB i set it back to 800? the ram lowest 533? or 400?

if fsb is at 800
the ram should be 400

that is 1:1 ratio anything more then that values are not beneficial to both performance and power consumption

coz the fsb is actually quad pumped, so 800/4 = 200
ddr2 rams run at 2x the rate, so 400/2 = 200

get it now?

then to overclock raise the fsb speeds only, the ram speed will follow whatever the fsb is at

This post has been edited by bryanyeo87: Jan 26 2008, 01:57 PM

ohh..thanks..will try..voltage?

no pump fsb first, add voltage sparingly if non at all, it is to stabilize cpu or rams, or high fsb overclocks

darn..stress test hang at 3.01GHz..57 hot meh? then how come hang? voltage is at 1.3V..RAM at 400Mhz