for normal oc is ok if like dbooi hardcore oc...is not good to use it
try at 5000+BE night time IDE is bout 30c and full load 30 min with ORTHOS is 42c
if oc to 3200mhz IDE is 34c full load 30 min with ORTHOS is 48c

---

Added on February 1, 2008, 11:28 amhyper TX got 3 model ..which 1 u use ???
mine one is hyper TX2 can use at 775 and am2

This post has been edited by digswell: Feb 1 2008, 11:28 AM

Last sunday i buy at JUST-PC (IMBI) Got 2 model can use with am2 mobo. 1 is cm hyper tx amd (if not worng is bout RM70) 2 is cm hyper tx2 can use in 775 and am2 price is RM95..so i nego a bit with the sellman ..he give me RM85..
tis cooler is quit good performance for low budget..
u can see many brand follow cm hyper tx ..like Xigmatek HDT-S1283(no sure is CM follow xigmatek or xigmatek follow CM)

This post has been edited by digswell: Feb 1 2008, 12:45 PM

If the floppy disk can not reflash or rescue back the bios ....the only way can do is hotflash the bios(this nid another biostar ta690g mobo to do it)

This post has been edited by digswell: Feb 1 2008, 08:58 PM

Maybe Multipier 10x 12x and 14x is the aswer for 1:1 for am2

1:1 do exit for amd ...but not for AM2

This post has been edited by digswell: Feb 1 2008, 08:59 PM

if MSI press left shift+F2 with left alt+ F3 at DigiCell

This post has been edited by digswell: Feb 2 2008, 03:33 PM

@dblooi

how did u think my tis 4200 f2 proc can go ??

try at 250x11 ORTHOS pass but when at 260 x11 ORTHOS fail
y ??

This post has been edited by digswell: Feb 3 2008, 01:33 AM

is 2.7g the maxsimun for 4200 f2 ??
cannot go higher ??

I will try to oc it maybe will ask a bit ur experince from u

Blur blur blur haaa Wat choice mobo chipset u wat to ???

maybe hv to wait March or April ...me also wait..tak boleh tahan liaooo

i now oc over 2.7g look like 2.86g will pass ORTHOS test

---

Added on February 4, 2008, 12:01 amif put V12 mode ..is mean only oc bout 25% to 30 %....but hv to see wat proc u use ..i think will not stable if the proc is fast 1(tis only will push the porc when loading)
is better use manual OC if u got a bit experince bout oc

This post has been edited by digswell: Feb 4 2008, 02:48 AM

@-pWs- @dj.eRicZzz
This my 1st oc post...like dj.eRicZzz say 4200+F2 is very hard to push it..i pump cpu Vcore-1.35v..HT-1.275v..Nb/sd(VVD)-1.170v and ram-2.0v

Proc-Amd 4200+F2
Mobo-Biostar TA 770 A2+
Ram-Team Elite DDR800 1gb x2 (5/5/5/16/19)
Hsf-Stock Amd X2 939 With heatpipe (allmost same with 6000+ stock hsf)




Need some advice and comment with tis OC resuft

This post has been edited by digswell: Feb 4 2008, 02:23 PM

hehe is noon bro..very hot at my room now ...yesterday night i try at 2860mhz the cpu temp only at 42c

will try tonight again...maybe will pump a bit higher with some vcore and other thing

so how is the resuft ???very bad izzit

Yalor....will try tonight but is still very hard to pust it beyond 3g

why ?? the pic no enought big ??? or hv to post it with more bigger pic

the pic no like very clear..maybe the time edit to small make it no clear enuf
maybe tis is ok

curently run 2530mhz on 24/7 ....nice u think hehe ...i think maybe tats speed oledi reach wall

try at 265 / 264 / 263 all fail.. oni 262 pass ORTHOS test

u mean set the ram timing ??? any advice with tat ??

This post has been edited by digswell: Feb 4 2008, 07:18 PM

@-pWs- bro
here is memset screen shoot ...



nid some advice of tat...i not very good with ram setting

---

Added on February 4, 2008, 9:33 pmmobo no hv functon for 1:1



This post has been edited by digswell: Feb 4 2008, 09:33 PM