i Think u Better Ask dblooi ..coz he use many biostar mobo
From i know TA770 A2+ and TF560 A2+ still hv wait the update bios (Coz Still Very New)
TA690G is very good OC mobo

OR IF CAN WAIT ... U CAN TRY TA780G (this 1 i think u can buy it after CNY)

Dont Buy Biostar MOBO if the PCB board is Green Colour(Lower quality) Blue COlour is better

@dblooi
Orand Kuat at AMD(R) Socket-AM2/AM2+ Overclocking thread

He is Master
He is Sifu

The highest Overclock at AMD(R) Socket-AM2/AM2+ Overclocking thread

try at 16x200 3200mhz is work very good
try at 16.5x200 ...the mobo detect the proc AMD 6 XX hang after Cmos
if next time i got free will try to up the fsb and multiplier

vcore is at stock vcore

good can run at 3200 mhz
wait bro ...hv to change the PSU 1st....see after cny got buget to buy new psu b4 add vcore

No hv taT much $$ to buy high end GC
Currently play Need for speed ProStreet but i no gamer
I like ATI GC coz cheap and the colour is same like with my Canon camera EOS 5 D
Can run Nvidia if u like to
i am 100% support in AMD and ATI
nolike Intel and nvidia play fool with version and chipset

---

Added on January 31, 2008, 12:25 pmNvidia or ATI also can run at ta77a2+
i using cheaper gc coz waiting for PCI-E 2.0 GC card
most GC now still at PCI-E 1.1
TA770 A2+ is PCI-E 2.0 so no point i buy high end gc card with only PCI-E 1.1

This post has been edited by digswell: Jan 31 2008, 12:29 PM

hey look like u lose power ??? u should add vcore to 1.375 or 1.4
the speed should over 3200mhz not below 3200mhz

------------Deleted------------

This post has been edited by digswell: Feb 1 2008, 07:59 AM

Is black edition brisbane temp also got problem ???

how bout this cpu and the core temp at ide

tat temp is IDE...WHEN load time bout 30 min with ORTHOS ..i hv use my hand touch b4..feel warn only ..i think bout below 50 .. then everest read 48c
sori..i no hv screen shoot for load ..maybe tomolo will do it

hey i oso no know maybe is black edition design like tat.. phenom 9600 BE oso like tat when i see the oversea forum review

1.96 should be very high...i only use 1.375 1.45 to oc at 3.2g

wat mobo u use ??
the question bout 1.65 to .17 to do 3.6ghz ..i hv no answer
try ask from dbooi ...he is very good in oc experince

Sori Guy Can Stop Tis Topis. ....After Hearing @PWS and @dbooi...The 5000+BE Brisbane Core Got Problem With The temp reading
I was wrong early no know tis G2 laso Same problem with G1
Ok can we stop tis topis

wat i know this proc Manufacturing process is 0.065 micron with 221 million transistors..
it should be a cool proc....but y the 2 core temp is not same with the cpu temp...tat is the question we all still blur blur now

Medium good cooler like cooler master hyper tx should be ok
and it a bit cheap
i use this cooler for my 5000+BE ...just buy a few day ago
Temp read is very low
feel with hand at the heatpipe a bit warm when it at load time

If use at 5000+BE should be no problem normally when u wan to buy tis kind of cooler
u should do some work ,wether can use with mobo,the casing feel space and the GC card
For me tis cooler is quit good and cheap, and can use at my mobo TA770A2+ oni bout rm85
and temp read is below 45 at hot day (no sure right or not coz is 5000+BE brisbane G2)

This post has been edited by digswell: Feb 1 2008, 11:13 AM