Should have produce more chip like F3 = affordable + highly oc-able.

---

Added on February 10, 2008, 1:31 amWhat happend la bro ? Feel sorry for you. No wonder senyap senyap very upset accident so no new results.

This post has been edited by mizivincible: Feb 10 2008, 01:31 AM

Try lower your HTT. And your TRC is 11 ? Try different timing. And my 4000+ hitting 3.0ghz also needs that amount of vcore.

No, just leave the multiplier at 9.5. Have you tried 5-5-5-15-20 ?

How about if you start from scratch ? Last time I got this setting from bro nadeng and it works -

1.Divider 533
2.TRFC - 195 ( Set it to the slot you put your ram, in your case TRFC0 and TRFC1)
3. MAL - 10
4. Use 4-4-4-12-16 timing

And dont forget to post up your results aite =)

Another buy ? Wahlau, I thot ur flying somewhere else ? Rupa rupanya letting go all the hardware to fund for something else la...

Anyway, does anyone know hows the OCZ SLi Edition 4gb kit oc goes with AMD x2 ?

This post has been edited by mizivincible: Feb 11 2008, 02:33 AM

And you were about to challenge that right ? For >4ghz F3

Started oc already ? Faster faster, you are not letting us to wait until chap go meh right ?

Anyway, anyone here using any 4gb kit HPR ? Let it be Gskill, OCZ or any 4gb (2x2gb) kit, how the oc goes ?

This post has been edited by mizivincible: Feb 11 2008, 05:03 PM

Dont know about the Brisbane DTS, some said that only using measuring tool (thermometer) on the proc then only we know the correct temp. My 4000+ during stock is at 25.28 idle, 38 load at 2.85ghz @ 1.31v, 34 idle, 51 load at 3.0@1.45v all idle temp cooled by GeminII with two Sanyo Denki H Series.

p/s : Just came back from meeting Sempronic, wait for his result on his latest project

1.5v is too high on air cooling, furthermore it touches 64degree celcius. I hope you arent using it for 24/7

Wat project ? Stay tuned, later he scold me for bocor rahsia

Rise and shine =)

Last night was my 4000+ retiring OC. Will sell off the proc after this

Here's a screenshot. With OCZ 4GB Dual Channel DDR2 800Mhz PC2-6400 SLI-Ready Edition that I received yesterday.



3DMark06


Will start on "new" overclocking session soon

Yerp, Im fully aware of that. And no, it doesnt feel hot, abit warm, and that's during night, late in the morning.

Lapped + GeminII with Sanyo Denki H Series

But that will be the last result for my 4000+.

This post has been edited by mizivincible: Feb 13 2008, 11:43 AM

Wowowow chill out guys. Everyone is trying to push to the limit. So hot, I came back from class and the thread already increased by 3 pages

---

Added on February 13, 2008, 4:57 pmAnyway bro dblooi and bro nadeng - Both of you using TA690G , may I know which version of bios ?

This post has been edited by mizivincible: Feb 13 2008, 04:57 PM

Thanks. Im using that BIOS too, rock stable. Just asking incase latest bios released is better than current 605 version.

So bro, any 100% oc result to show us ?

This post has been edited by mizivincible: Feb 13 2008, 05:38 PM

Bro, show cpuz with memory tab too so that our sifu sifu sekalian can help

And you were the one who said TA770 wasnt promising enough

Faster show any benchies

With that budget might as well go for ST400. I dont really trust CM PSU (but that's only me)

This post has been edited by mizivincible: Feb 14 2008, 03:48 PM

Which F3 or G2 are you talking about bro ?

:lapping processor mode:

Just came back from hardware shop getting sandpaper, masking tape, autosol, bla bla. Starting to lap my "new" proc

Yes it is F3. Perhaps it's one of the best F3 (lol all F3 is good lorr). Cant wait to push it

---

Added on February 14, 2008, 7:35 pmReally ? I need you all to guide me after finish lapping okie

---

Added on February 14, 2008, 7:37 pmWOW another sifu support the statement, guess I really really have to apppreciate this chip. Later try and we know

This post has been edited by mizivincible: Feb 14 2008, 07:37 PM

Couldnt agree more. Try those fans from AllnGap, especially papst, Sanyo Denki, Delta.

TA770 rilly got bios issue ?

Pc Wak ke ?

Anyway, still lapping my proc. Damn I was frigging gelabah just now when one of the pin bended, but thank god not that serious la after some adjustment it managed to go straight again. Risky risky Hopefully everything will be fine.