high? ..mybe something goes wrong while mounting

This post has been edited by alive88: Feb 15 2008, 07:27 PM

my xigmnatech is 33 load with non AC.
sure ur tuniq is performing around the same.
even my cheepo hyper tx is 44 load 1800rpm.

33 wif OC or no OC?makes me feel down again..

dude with oc 1.325v bare min.
i even up to 1.42v.

seriously i think urs is high. i tested my friend gemin2 is running 1.32v at 33 max load.
not to let ur down, have u tried tx2 applied?

DHX
If I remember correctly, only XMS2 v1.x nice to oc.
Other seem not so nice.
Not sure about DHX. Good luck to you bro.

-pWs-

Dont have to OC and test now.
I will only test later when i back from oversea.

im using tx-1 bro..even luka my finger while mounting it

Maybe ur casing is restricting the airflow and heat transfer, I used that casing before 1 year back actually.
You open your side panel?
Now I am using hypertx with standard thermal paste and all silent fan around. temp is 44 max load.

idle is 30. 1.32v.

This post has been edited by DevilMan: Feb 15 2008, 07:41 PM

i open it..very good airflow..add on wif allngap delta high cfm fan to suck out the hot air

bro..try lowering the Vcore..i can get stock core with 2.5Ghz...same proc as u...give it a try

This post has been edited by User_Xp: Feb 15 2008, 07:44 PM

Hmm weird, inded im getting 44c now.

itu tuniq good ka?

here my highest oc..coz ram limit my oc..

---

Added on February 15, 2008, 8:28 pmhmm..hard to say..im satisfied

This post has been edited by alive88: Feb 15 2008, 08:28 PM


Attached thumbnail(s)

nice.

thankx dude..but really disappointed wif my ram..if not can go further..this tuniq really good indeed..1.55vcore at 3.5 idle at 38c

Balistic wor, what speed and timings???
Standard model I mean,

This post has been edited by DevilMan: Feb 15 2008, 08:59 PM

tightest timing,5-5-4-3-11 and highest speed,1168

Thats quite good for me.

forgot to add..vdimm at 2.17

I going try to oc my 4200+ with CnQ on
See how high can go...