|
ianho
|
Dec 21 2007, 02:32 PM
|
Cucimangkoklife
|
|
|
|
|
|
|
ianho
|
Dec 21 2007, 05:25 PM
|
Cucimangkoklife
|
QUOTE(DEz012 @ Dec 21 2007, 04:04 PM) Nice, but how come the close up picture on the samsung chips looks like crack marks on the blue board. It's the fibers from the cotton wool I used to clean off the paste so we can see the markings on the chip. It's funny how it doesnt appear to the naked eye but when u macro shot with a camera every little detail comes out.
|
|
|
|
|
|
ianho
|
Dec 21 2007, 06:45 PM
|
Cucimangkoklife
|
QUOTE(Createmous @ Dec 21 2007, 06:32 PM) zotac made from where? d name like malay company 1 euwww..   malay will sound more like botak lar. This is Zotac. Zotac is a Hong Kong company.
|
|
|
|
|
|
ianho
|
Dec 21 2007, 09:49 PM
|
Cucimangkoklife
|
QUOTE(Terence573 @ Dec 21 2007, 07:19 PM) Any solution u use with the cotton wool? I always use Zippo fluid.
|
|
|
|
|
|
ianho
|
Dec 25 2007, 01:15 PM
|
Cucimangkoklife
|
U guys worried about 8800GT temps shud check out the super duper uber cool temps of the Zotac AMP. I just tested mine n they're only running at 62C full load. Not only that, I'm running them in SLI in a super small n tight SFF case called the Silverstone SG03. I loaded up the dual core CPU to 100% n then ran the Zotac AMPs at 100% n still the temps were nice n cool. The all aluminum cooler from Zotac must be working really well. I'll post the screenshot later coz it's in the SG03 rig n I'm using my King Kong rig to post this now.
|
|
|
|
|
|
ianho
|
Dec 25 2007, 11:04 PM
|
Cucimangkoklife
|
QUOTE(zamanjaafar @ Dec 25 2007, 02:28 PM) did u modify the fan speed via rivatuner? QUOTE(Godek @ Dec 25 2007, 08:52 PM) hope u post it here hehe. me also use Zotac AMP.yup its use all alum as cooler. BTW, ianho how fan speed ? (stock 25% or full load). interesting because me at 60% Fan temp at idle is 55C. I didnt change any settings. All on stock coz I just installed everything to test the thermal characteristics of my SG03 case.
|
|
|
|
|
|
ianho
|
Dec 31 2007, 05:06 AM
|
Cucimangkoklife
|
Wheeeeeeeeeeeeeeee. I finally had sum free time to plonk my Zotac AMP 700/2000 cards into my benching rig n it's pretty impressive. It cannot beat my 8800GTX in gaming for sure, but in terms of 3DM06 it is very impressive indeed. Here's a run I just did with 8800GT Zotac AMP Version 700/2000. This is the version with Samsung chips. Just look at the score in Vista, 17183 marks. If I run in Windows XP the score will be even higher. The cards were only run at stock AMP speeds. I didn't even OC them yet. 17183 marks in 3DM06
This post has been edited by ianho: Dec 31 2007, 08:09 AM
|
|
|
|
|
|
ianho
|
Dec 31 2007, 05:33 AM
|
Cucimangkoklife
|
QUOTE(emy_xvidia @ Dec 31 2007, 05:21 AM) i thought Zotac used Qimonda ones.. damn, nice score you got there..  The cards that I used for the above scores are the new Zotac AMPs with blue PCB n red LED fans. Zotac is the only 1 that's using Samsung chips right now. Supposed to be much better than the Qimonda equipped cards. Here's sum pics of the cards that Zotac sent to me.      Pic of the Samsung chips. This post has been edited by ianho: Dec 31 2007, 05:35 AM
|
|
|
|
|
|
ianho
|
Dec 31 2007, 05:47 AM
|
Cucimangkoklife
|
QUOTE(emy_xvidia @ Dec 31 2007, 05:35 AM) mind to know where did u get those and how much each?  Zotac sent them to me. I'm sponsored by Zotac. They are available from LYP now though. Retail price I'm not sure how much.
|
|
|
|
|
|
ianho
|
Dec 31 2007, 08:36 AM
|
Cucimangkoklife
|
QUOTE(nles @ Dec 31 2007, 06:31 AM) The one u shown are the new revision cards right, local selling those already or the old stocks. hmm forumer bulking it at RM999 Is it suppose to be orange LED or red  Ya it's available locally already. rsangel just bought the same card that I have. QUOTE(rsangel @ Dec 31 2007, 08:21 AM) Nice benchi u have bro ianho, have u come out the comparison of the Zotac Thermal paste with and without? Coz my zotac still waiting to apply the paste or not  Haven't tried individual cards yet to compare temps. Will do so once I finish testing them in SLI.
|
|
|
|
|
|
ianho
|
Dec 31 2007, 09:15 AM
|
Cucimangkoklife
|
QUOTE(168257061 @ Dec 31 2007, 09:02 AM) @ianho, do you re-apply a new thermal compound after removing the cooler ? which model you use. I used my favorite Arctic Cooling MX2 on 1 of the 8800GT I have to compare the temps with stock paste. But I havent tested single cards yet. Now still playing with SLI. Here's a pic of me applying MX2 to 1 of my Zotacs. This post has been edited by ianho: Dec 31 2007, 09:21 AM
|
|
|
|
|
|
ianho
|
Dec 31 2007, 09:28 AM
|
Cucimangkoklife
|
QUOTE(168257061 @ Dec 31 2007, 09:23 AM) hmm....wondering hows the different between stock thermal paste and MX2 on reference cooler. AceCombat tested with zalman cooler only. Quicky do a little review and compre to us.  I'm testing SLI performance right now. After I finish then I will go back to testing single card. It's very time consuming to keep uninstall n install drivers n hardware so once I do it, I will test everything until I satisfied only move on to next thing. Right now testing 8800GT SLI performance so I can compare with 8800GTX SLI performance. After that I will move on to single card to compare teh temps of MX2 n stock paste. By that time the MX2 would have had sum time to cure oso.
|
|
|
|
|
|
ianho
|
Dec 31 2007, 04:32 PM
|
Cucimangkoklife
|
QUOTE(kerryking @ Dec 31 2007, 10:20 AM) Ianho, how about oced it, see how far can go hehe Ya I'm in the process of doing it now. Spent the whole night playing with the Zotacs until 10am just now pengsan oredi.  Tonight new years dinner, tomorrow hangover, probably wednesday oni will get down to OCing.
|
|
|
|
|
|
ianho
|
Jan 2 2008, 10:03 AM
|
Cucimangkoklife
|
|
|
|
|
|
|
ianho
|
Jan 2 2008, 02:31 PM
|
Cucimangkoklife
|
Im using top secret rams
|
|
|
|
|
|
ianho
|
Jan 2 2008, 11:53 PM
|
Cucimangkoklife
|
QUOTE(craxors @ Jan 2 2008, 03:05 PM) wow..maybe its the kingston 667 value ram.. come on la bro..tell us..i oso using same GC..  kakaka. U try lar n run Value Rams at 800mhz n 4-4-4 timings. QUOTE(lee1767 @ Jan 2 2008, 10:11 PM) Does anyone know how to remove the thermal paste on the 8800GT graphic card? (Other than using Arctic Clean) Coz i want to install Thermalright HR03-GT heatsink. Just use Zippo fluid. Removes thermal paste like 1,2,3.
|
|
|
|
|
|
ianho
|
Jan 3 2008, 10:50 PM
|
Cucimangkoklife
|
3DM06 is a real crock. CPU OC produces extra marks by the thousands while GPU OC gets u only like 200 marks. It's utter nonsense. I hope 3DM07 or whatever comes out next goes back more towards the GPU.
|
|
|
|
|
|
ianho
|
Jan 4 2008, 10:12 PM
|
Cucimangkoklife
|
QUOTE(alexandros_18th @ Jan 4 2008, 10:09 PM) I'm the guy cyberfly talked about. Right now I'm using it under air conditioned room. Temperature: idle is like 44C and at load ( I minimized Crysis and see ) 46C. I'll try to look again when the aircond is turned off. U cannot check the temp like that. Use Rivatuner's graph to scan tru the temps during the gaming session. There's no way a card will be only 2C hotter during games, unless ur using extremely good water cooling on the gfx card. Even then the temp diff shud still b about 5C. This post has been edited by ianho: Jan 4 2008, 10:14 PM
|
|
|
|
|
|
ianho
|
Jan 5 2008, 02:27 AM
|
Cucimangkoklife
|
QUOTE(cyberfly @ Jan 5 2008, 01:46 AM) other brand will goes till 70-80c  He got those temps in air cond room ler. How can u compare like that.
|
|
|
|
|
|
ianho
|
Jan 5 2008, 11:24 PM
|
Cucimangkoklife
|
QUOTE(Sony Trinitron @ Jan 5 2008, 07:49 PM) my asus top edition just died.... not even 3 weeks after purchase! the fan stopped working and artifacts were all over the screen, in the end blackout. going to rma it on monday! RAM sudden death syndrome strikes again.
|
|
|
|
|