Proposal = Change few stuff make my casing cool~!
-adding fan
-polishing
-spraying
-adding acrylic

tools
-tukul
-pahat
-pisau?

swt.. i dont hv money to buy tools, using what ever have in house to make it. xP
will added pic by 6am in the morning
reserve!


here's the pic same as my casing, i forgot to borrow my dad camera, so.. i'll upload mine later.


this from right side view lol..


this is the left side


here is the inside.. sorry forgot to take full view..
notice that the wire got clean abit aa.. cuz see some thread about wire management, so i clean up as u guys did.




AC0713-BR

Name : AVF ATX Series
Interface : Excellent
Colour : Red
Packing : AVF Packing
Description :

* TYPE: MIDDLE TOWER CASE
* DRIVE SPACE 5.1/4": 4
* DRIVE SPACE 3.1/2": 7 (2 HIDDEN)
* MAIN BOARD: FULL SIZE ATX
* DIMENSION(LxWxH): 430x200x430mm
* FAN CAPACITY:
Front : 1x12cm
Rear : 1x12cm
Side : 1x8cm+1x12cm ; 2x12cm
HDD Side : 1x8cm
* PCI VENTILATION: YES
* AIR DUCT OPTION: YES
* POWER SUPPLY: 500w


i still dunno what to do with casing, but maybe do like Ryudox casing, since his casing inspired me and Doomz casing.

news update, i need... acrylic shop.. where can i get area ampang or KL?

sorry for bad camera.. using old camera


here's what i've done to ltwvince 5 units of DC fans that i've bought


1st, i took of the fan, stripped 'em




then i spray 'em!!


thats all for now, today going to pc fair to buy some fans, cooler maybe.. see if dads good enuf to support, if not, just buy 120mm fans 2 unit and see whats cheaps..

This post has been edited by m2n-e: May 1 2008, 08:38 AM

plexi? got ppl sell? anyone know how to remove rivet?
need acryilic for my casing.. anyone know where to get here at ampang ?
got cut my old casing, but rosak liao.. dun want 2x rosak.. no much money for modding either..

drill.. rivets.. anyone can borrow me?

plate number huh? go steal mat rempit plate number

i see

today.. go pc fair.. just windows shopping.. dunno what to buy..
then go lowyat, buy 2x8cm fangrill and 1x12cm fangrill, LED 8cm fans, strapper, and few screws..

and i got question.. can rivet be placed with screw?

how about use paku? dangerous.. huhuhu

This post has been edited by m2n-e: Dec 8 2007, 10:22 PM

manual drill ready!!

lols... i use playar.. cabut >_< do it around 1-2am later.. cabut 1 rivet edi with playar.. = ="

less than a minute for the 1 rivet i pull out


where to buy rivets?

This post has been edited by m2n-e: Dec 9 2007, 03:02 AM

pins+small philip screw drivers

This post has been edited by m2n-e: Dec 11 2007, 11:43 PM

-mood : bored-
-listen to : Bon Jovi - You Give Love A Bad Name -


aaa.... not enuf money, actually no money at all to buy acrylic..
want buy drill dont have money, and i'm the only guy who involve in modding among my fren = =" i'm a freak..

today, back from pt job.. in my bro bedroom, for fun, punggah2.. then found something i dont even know their existant.. lol.. ahah

a UV sleeving for wire
never knew my bro bought is.. lol.. he never told me..
well.. i'm bored.. so.. this is my 1st time do it, and the result.. kinda ok la.. i'm still a newb..
here's what i've done just now..


lols, continue working find idea for my modding

tested the fan edi, no need warranty, a bit of soldering will do if anything happen, and got few motor to replace if broken.

thanks, but the paint fade need find much good quality spray.. lolz..

i almost gave up, due to short of money, but i think i wont since i need to finished what i've started.

dunno, maybe around 8-10 fans, since i have around 10-15 fans

can be considered that, 2008 is near~ yay~ hopefully allowance++ and can buy dremel and driller.

erm.. i'll upload this morning around 10am.. see how..

collecting money to buy anyway,
right now.. my camera cannot be used..
the lens got crack and need to be repaired..
no update will be made until i bougt driller and dremel.

u guys can help me make me modding the casing faster by buying my stuff that i sell lolz

project will be update after 7th January 2008.

waa... continued.. phew.. got some cash.. buy stuff for modding wee..

stuff that added up after awhile :
1x Hammer Drill - buy at carrefour
1x Vizo Windstorm - but at AllIT lowyat
3x Bosny Acrylic Spary Paint - buy at carrefour
1x CoolViva Vga Cooler - Buy from Sengf

upcoming stuff :
buying all this stuff from bro bombman.

5xbag rivets
1x50x50cm 2mm acrylic
1x25x25cm 2mm acrylic
1xSellery Plastic Cutter


hehe.. coming up photo but dunno when.. currently lazy.


as u guys know.. i have no idea to turn my casing into what..
maybe change it into Mini Thermaltake Armor+ ESA
may my casing dont curse me >__<

This post has been edited by m2n-e: Feb 11 2008, 08:54 AM

relax bro.. currently halt my progress... my gc dead..
now i'm looking for a new gc as replacement and send my gc for repaired.




This post has been edited by m2n-e: Mar 24 2008, 03:13 PM

well... due to financial always an issues to me..
i'm just going to do some few mod :~
-atx to btx
-hdd bay.

coming soon to be finished.
and coming soon 2nd project if got people buy my NewRichShine Hi-Fi lots of monies coming
from that selling, hope got people buy and i can continue my mod.


UPDATE!
bored.. somehow my hand so ichy to spray my casing lol..
muahahaha... salai my hdd bay..


huhuhu, sun bath my mobo tray and other stuff.


to be continued as the spray drying. maybe complete my mod tonite, phase 1 about to complete.

This post has been edited by m2n-e: Mar 28 2008, 06:09 PM