Proposal = Change few stuff make my casing cool~!
-adding fan
-polishing
-spraying
-adding acrylic

tools
-tukul
-pahat
-pisau?

swt.. i dont hv money to buy tools, using what ever have in house to make it. xP
will added pic by 6am in the morning
reserve!


here's the pic same as my casing, i forgot to borrow my dad camera, so.. i'll upload mine later.


this from right side view lol..


this is the left side


here is the inside.. sorry forgot to take full view..
notice that the wire got clean abit aa.. cuz see some thread about wire management, so i clean up as u guys did.




AC0713-BR

Name : AVF ATX Series
Interface : Excellent
Colour : Red
Packing : AVF Packing
Description :

* TYPE: MIDDLE TOWER CASE
* DRIVE SPACE 5.1/4": 4
* DRIVE SPACE 3.1/2": 7 (2 HIDDEN)
* MAIN BOARD: FULL SIZE ATX
* DIMENSION(LxWxH): 430x200x430mm
* FAN CAPACITY:
Front : 1x12cm
Rear : 1x12cm
Side : 1x8cm+1x12cm ; 2x12cm
HDD Side : 1x8cm
* PCI VENTILATION: YES
* AIR DUCT OPTION: YES
* POWER SUPPLY: 500w


i still dunno what to do with casing, but maybe do like Ryudox casing, since his casing inspired me and Doomz casing.

news update, i need... acrylic shop.. where can i get area ampang or KL?

sorry for bad camera.. using old camera


here's what i've done to ltwvince 5 units of DC fans that i've bought


1st, i took of the fan, stripped 'em




then i spray 'em!!


thats all for now, today going to pc fair to buy some fans, cooler maybe.. see if dads good enuf to support, if not, just buy 120mm fans 2 unit and see whats cheaps..

This post has been edited by m2n-e: May 1 2008, 08:38 AM

Bro,nice start.

I have an idea here,take out the HDD bay,make a new custom HDD bays by using plexi.

keep up the good work.....that casing has a lot of potential, never seen it here thou'

plexi? got ppl sell? anyone know how to remove rivet?
need acryilic for my casing.. anyone know where to get here at ampang ?
got cut my old casing, but rosak liao.. dun want 2x rosak.. no much money for modding either..

To remove rivets,you need to have a drill and drill the rivets.
Then you also need a new packs of rivets to install it again later.

About the plexi,you need to fing it somewhere around shop that make plate numbers,signboard,name tags etc.

Modding does not need a lot of money.

drill.. rivets.. anyone can borrow me?

plate number huh? go steal mat rempit plate number

i see

today.. go pc fair.. just windows shopping.. dunno what to buy..
then go lowyat, buy 2x8cm fangrill and 1x12cm fangrill, LED 8cm fans, strapper, and few screws..

and i got question.. can rivet be placed with screw?

Oic,nice...

Yup,of course you can use screw or bolt with nut.There no limitations in modding.

how about use paku? dangerous.. huhuhu

This post has been edited by m2n-e: Dec 8 2007, 10:22 PM

No lah,dont use paku,unless u r dealing with wood
So,get the drill ready and start your work.

manual drill ready!!

manual drill???????????

Bro,even i use power drill,its kind of hard to remove those rivets.

Borrow from your fren 1st la...

lols... i use playar.. cabut >_< do it around 1-2am later.. cabut 1 rivet edi with playar.. = ="

wow...using playar??
u better use drill...less than a minute can remove the rivet

less than a minute for the 1 rivet i pull out


where to buy rivets?

This post has been edited by m2n-e: Dec 9 2007, 03:02 AM

You could get it in any hardware shops ... just tell them u are looking for rivet

they got the tool to use with the rivet as well .. .most of them

The riveter cheapers should cost you 25 bucks...the plastic one...its ok also..i use it..hehe!! rivets is nt expensive...
Just drill ure old rivets botak...put new ones...flip your casing anyway you want..

yea u can find it at most of hardware shop... just ask the tokey..
even int the bulk section, someone selling it... u know who do you...

btw, what tools u use to separate ur fans blade from its body? plier?

pins+small philip screw drivers

This post has been edited by m2n-e: Dec 11 2007, 11:43 PM

-mood : bored-
-listen to : Bon Jovi - You Give Love A Bad Name -


aaa.... not enuf money, actually no money at all to buy acrylic..
want buy drill dont have money, and i'm the only guy who involve in modding among my fren = =" i'm a freak..

today, back from pt job.. in my bro bedroom, for fun, punggah2.. then found something i dont even know their existant.. lol.. ahah

a UV sleeving for wire
never knew my bro bought is.. lol.. he never told me..
well.. i'm bored.. so.. this is my 1st time do it, and the result.. kinda ok la.. i'm still a newb..
here's what i've done just now..


lols, continue working find idea for my modding

Bro, like that the fan no more warranty.

Nice looking color scheme. Maybe I shall do the same and sell it at higher price.