Outline ·
[ Standard ] ·
Linear+
Athlon 64 3500+ AM2 clock to 2.75GHZ got problem, Is it the limit of my processor ?
|
TSHMV DVD
|
 Dec 1 2007, 12:41 PM, updated 19y ago
|
Getting Started
|
My pc spec is Abit kn9 ultra motherboard , Athlon64 3500+ AM2 codename : orlean processor from 2.2GHZ(200*11) clock to 2750 (250*11) , my ram is cheapest kingston 1gb ddr2 667MHZ x2 and icute 450w power supply . My bios setting is like that FSB = 250MHZ Multiplier = x11 pcie clock =100MHZ cpu core voltage =1.400V Ram voltage = 1.90v HT speed = 3x cpu cool and quiet control = disabled DRAM setting is 533MHZ cas latency =5 clocks TRCD=5 clocks Trp =5 clocks Tras=15 clocks Trc = 21 clocks Trfc0 for dimm1= 127.5 ns Trfc1 for dimm2=127.5 ns Trfc2 for dimm3=127.5 ns Trfc3 for dimm4=127.5 ns But sometimes insert window will BSOD , everytime boot up no problem . is it my spec limitation ? Every sifu please give some advise ! Thanks !  |
|
|
|
|
|
rainingzero
|
Dec 1 2007, 01:13 PM
|
|
|
QUOTE(HMV DVD @ Dec 1 2007, 12:41 PM) My pc spec is Abit kn9 ultra motherboard , Athlon64 3500+ AM2 codename : orlean processor from 2.2GHZ(200*11) clock to 2750 (250*11) , my ram is cheapest kingston 1gb ddr2 667MHZ x2 and icute 450w power supply . My bios setting is like that FSB = 250MHZ Multiplier = x11 pcie clock =100MHZ cpu core voltage =1.400V Ram voltage = 1.90v HT speed = 3x cpu cool and quiet control = disabled DRAM setting is 533MHZ cas latency =5 clocks TRCD=5 clocks Trp =5 clocks Tras=15 clocks Trc = 21 clocks Trfc0 for dimm1= 127.5 ns Trfc1 for dimm2=127.5 ns Trfc2 for dimm3=127.5 ns Trfc3 for dimm4=127.5 ns But sometimes insert window will BSOD , everytime boot up no problem . is it my spec limitation ? Every sifu please give some advise ! Thanks ! from ur prob, i think u have to pump out more Vcore... coz the proc not enough juice to runs the oced speed, then it will Bsod while try to boot windows... try increase ur Vcore... |
|
|
|
|
|
sjn hassan
|
Dec 1 2007, 01:23 PM
|
|
|
1T or 2T and imho icute are not true power..so pls beware the voltage fluctuation..bad PSU may kill u'r hardware  |
|
|
|
|
|
rainingzero
|
Dec 1 2007, 01:27 PM
|
|
|
yeah, may caused by voltage fluctuations too...running 24/7 oced proc paired with icute psu not a wise decision. later all goes in one short...  |
|
|
|
|
|
TSHMV DVD
|
Dec 1 2007, 01:43 PM
|
Getting Started
|
QUOTE yeah, may caused by voltage fluctuations too...running 24/7 oced proc paired with icute psu not a wise decision. later all goes in one short...nod.gif Thank for advice giving by rainingzero! My ram running 1T , if i change to Cooler Master Extreme Power 430W psu will more better or not ? And what means is running 24/7 oced proc , how to count ? Thank !!!!  |
|
|
|
|
|
rainingzero
|
Dec 1 2007, 02:03 PM
|
|
|
QUOTE(HMV DVD @ Dec 1 2007, 01:43 PM) CoolerMaster 430watt is good also if u tight in budget...depends on ur hardwares too..what ur specs?? 24/7 means running ur oced pc 24hours, 7 days a week..  |
|
|
|
|
|
TSHMV DVD
|
Dec 1 2007, 02:29 PM
|
Getting Started
|
Thank for information giving by rainingzero !
i also consider cooler master 430w more better , but i not open long time like 24hours , scare my hardware will spoiled !
Ok , thank for u i will try later !
|
|
|
|
|
|
xixo_12
|
Dec 1 2007, 02:36 PM
|
|
|
maybe can go into am2 thread oso..
|
|
|
|
|
|
CV6149
|
Dec 1 2007, 07:09 PM
|
|
|
2.7g shud need about 1.47-1.5v...
430w is still not very good choice wattage to oc..
and set ur ram to 2t
|
|
|
|
|
|
DaRkSyThE
|
Dec 1 2007, 11:02 PM
|
Look at all my stars!!
|
aiks im so sorry bro
you can post it in the AM2 thread
thanks!
|
|
|
|
|
Quote
0.0149sec
0.35
5 queries
GZIP Disabled