Outline ·
[ Standard ] ·
Linear+
Bestest engine oil, Not Bold
|
TSBalanced
|
Oct 13 2025, 04:43 PM
|
|
QUOTE(DM3 @ Oct 13 2025, 02:52 PM) Same I used only H n Shell oil 0-20w n since my engine now 112k km, plan use 5-30w she'll n now since jus gt the VRP with almost same price as the shell but cheaper than H oil ,try lo and I think my overboost little 1.5T engine can be cleaner n last long but then again by 150k km usually gt new car liou Why u wan to increase from w20 to w30?
|
|
|
|
|
|
TSBalanced
|
Oct 14 2025, 11:55 AM
|
|
QUOTE(DM3 @ Oct 13 2025, 05:56 PM) Not much diff actually,jus better heat control n mileage also high, some H SC ask to upgrade to 5-30 also even when new,anywya6in manual also recommended. This engine also have risk of oil dilution 3-4% every 1k km as data frm US accords.thankfully our climate is way warmer The vpr u ordered is it same thickness as your current oil? Have u started using the vpr? If not yet and using same weigh oil, can u check the compression in each cylinder before using, and then retake the compression reading after using 1 cycle of vpr? I cannot do the same as mine because previously using 5w40, now the vpr i am using is 5w30..
|
|
|
|
|
|
TSBalanced
|
Oct 14 2025, 12:22 PM
|
|
QUOTE(josh5671 @ Oct 14 2025, 12:15 PM) not a car guy. i buy 5L 'proton' oil from shopee suspected be fake oil. recently trying hardex engine oil on 1.5NA almera, hardex eximius 5w30 did make the car better respond compare to previous castle 5w30...quite 'magic' for me. ofc, it can be due to i changed ignition oil and spark plug together too. again, not a car guy. Buy from shoppee authorized dealer to minimize risk of fake oil. Or just go buy bold engine oil. Been using it in my honda k20a type R engine with 260hp, for few years and over 10 cycles, so far so good. Buy the fully synthetic one
|
|
|
|
|
|
TSBalanced
|
Oct 14 2025, 01:29 PM
|
|
QUOTE(DM3 @ Oct 14 2025, 12:49 PM) No all these while 0-20, but manual but my frens used 5-30 H oils. I don't knw how to check compression test leh. I start using VRP by early Dec since kow only run 4k km only Aiya okok, then dun need check compression. Its quite easy if gv mechanic but most dont even have the tools to do it zzz..
|
|
|
|
|
|
TSBalanced
|
Oct 14 2025, 03:36 PM
|
|
QUOTE(DM3 @ Oct 14 2025, 03:31 PM) Ya always let it cool awhile b4 shutting down, the accord use same as civic but increase the Hp to 200hp Ya sudah 110k km lo ,some owners H SC already ask to use 30 when new lo Honda engine 110k km is considered low mileage.. my engine still virgin never open up before, 270k km and it still revvv smoothly to 8500rpm every time i got open roads
|
|
|
|
|
|
TSBalanced
|
Oct 14 2025, 04:38 PM
|
|
QUOTE(ze2 @ Oct 14 2025, 03:44 PM) Not even change valve cover seal ? Previous owner i dunno, but the seals look stock. If tukar d usually can see the gam gasket one. The seals i tukar is the vtec solenoid seal and camshaft seal.
|
|
|
|
|
|
TSBalanced
|
Oct 14 2025, 04:41 PM
|
|
QUOTE(DM3 @ Oct 14 2025, 03:45 PM) The l15t engine built too thin between chambers n have head gasket burnt issues and always fuel dilution make the EO thinner. Well 5-30 is as thin near 0-20 n also in Service manual to use.so all good Only tht time with my FC use Shell 5-40, memang heavy n after short run tukar back 20 I think its due to the small indentation in the small space between each cylinder is the issue. How la the gasket wan seal properly like this. Apparently that design to help cool the engine
|
|
|
|
|
|
TSBalanced
|
Oct 15 2025, 12:36 PM
|
|
QUOTE(urnicksux2 @ Oct 15 2025, 11:15 AM) Got ktard keep mention bold but i no dare use Y u no dare use? Even my car with high revving powerful engine i dare use with no issues.
|
|
|
|
|
|
TSBalanced
|
Oct 15 2025, 12:38 PM
|
|
QUOTE(Virlution @ Oct 15 2025, 07:03 AM) mine will be hitting 300k sometime next year  Yours k24? Got makan minyak? U use ron97 ah?
|
|
|
|
|
|
TSBalanced
|
Dec 2 2025, 09:10 PM
|
|
QUOTE(Par@dox @ Dec 2 2025, 08:45 PM) How is it after trying ah? Can tell whether ori or not? I also came across the same seller on Shopee, but undecided yet on whether to proceed since not sure if ori. Should be ori as my engine felt quieter. I only used for 3500km currently. It felt quieter after 1500km, but the oil consumption slightly increases. Probably due to previous i was using 5w40, current this valvoline i am using 5w30. I will continue monitor and let it continue do its cleaning as it claims needed 4 cycle. Reviews from other users reported reduced oil consumption as soon as 3000 miles to longer. So mine still early.
|
|
|
|
|
|
TSBalanced
|
Dec 2 2025, 09:31 PM
|
|
QUOTE(ry8128 @ Dec 2 2025, 09:27 PM) What is the logic of fuel consumption increase when lower viscosity oil is used? Ah my bad. Its oil consumption, not fuel consumption. ---- Hey waitaminute i was right, i wrote oil consumption, not fuel consumption. Uncle, get your eyes checked please This post has been edited by Balanced: Dec 2 2025, 09:32 PM
|
|
|
|
|
|
TSBalanced
|
Dec 2 2025, 11:56 PM
|
|
QUOTE(Momo33 @ Dec 2 2025, 11:24 PM) you should also use petrol ron95 from Caltex or BHP. proven formula . the fuel claims the best in cleaning deposits at rings I am a long time caltex user. Doesnt work, at least not when the engine already having oil consumption issues.
|
|
|
|
|